1 // SPDX-License-Identifier: GPL-2.0+
3 * (C) Copyright 2003 Motorola Inc.
4 * Xianghua Xiao (X.Xiao@motorola.com)
5 * Modified based on 8260 for 8560.
8 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
10 * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00.
14 * Minimal serial functions needed to use one of the SCC ports
15 * as serial console interface.
19 #include <asm/cpm_85xx.h>
21 #include <linux/compiler.h>
23 DECLARE_GLOBAL_DATA_PTR;
25 #if defined(CONFIG_CONS_ON_SCC)
27 #if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
30 #define PROFF_SCC PROFF_SCC1
31 #define CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
32 CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
33 #define CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
34 #define CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
35 #define CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
37 #elif CONFIG_CONS_INDEX == 2 /* Console on SCC2 */
40 #define PROFF_SCC PROFF_SCC2
41 #define CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
42 CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
43 #define CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
44 #define CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
45 #define CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
47 #elif CONFIG_CONS_INDEX == 3 /* Console on SCC3 */
50 #define PROFF_SCC PROFF_SCC3
51 #define CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
52 CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
53 #define CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
54 #define CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
55 #define CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
57 #elif CONFIG_CONS_INDEX == 4 /* Console on SCC4 */
60 #define PROFF_SCC PROFF_SCC4
61 #define CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
62 CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
63 #define CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
64 #define CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
65 #define CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
69 #error "console not correctly defined"
73 static int mpc85xx_serial_init(void)
75 volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
76 volatile ccsr_cpm_scc_t *sp;
77 volatile scc_uart_t *up;
78 volatile cbd_t *tbdf, *rbdf;
79 volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
82 /* initialize pointers to SCC */
84 sp = (ccsr_cpm_scc_t *) &(cpm->im_cpm_scc[SCC_INDEX]);
85 up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
87 /* Disable transmitter/receiver.
89 sp->gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
91 /* put the SCC channel into NMSI (non multiplexd serial interface)
92 * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
94 cpm->im_cpm_mux.cmxscr = \
95 (cpm->im_cpm_mux.cmxscr&~CMXSCR_MASK)|CMXSCR_VALUE;
97 /* Set up the baud rate generator.
101 /* Allocate space for two buffer descriptors in the DP ram.
102 * damm: allocating space after the two buffers for rx/tx data
105 dpaddr = m8560_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
107 /* Set the physical address of the host memory buffers in
108 * the buffer descriptors.
110 rbdf = (cbd_t *)&(cpm->im_dprambase[dpaddr]);
111 rbdf->cbd_bufaddr = (uint) (rbdf+2);
112 rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
114 tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
115 tbdf->cbd_sc = BD_SC_WRAP;
117 /* Set up the uart parameters in the parameter ram.
119 up->scc_genscc.scc_rbase = dpaddr;
120 up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
121 up->scc_genscc.scc_rfcr = CPMFCR_EB;
122 up->scc_genscc.scc_tfcr = CPMFCR_EB;
123 up->scc_genscc.scc_mrblr = 1;
133 up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
134 up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
135 up->scc_rccm = 0xc0ff;
137 /* Mask all interrupts and remove anything pending.
142 /* Set 8 bit FIFO, 16 bit oversampling and UART mode.
144 sp->gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
146 SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
148 /* Set CTS no flow control, 1 stop bit, 8 bit character length,
149 * normal async UART mode, no parity
151 sp->psmr = SCU_PSMR_CL;
153 /* execute the "Init Rx and Tx params" CP command.
156 while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
159 cp->cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
160 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
162 while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
165 /* Enable transmitter/receiver.
167 sp->gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
172 static void mpc85xx_serial_setbrg(void)
174 #if defined(CONFIG_CONS_USE_EXTC)
175 m8560_cpm_extcbrg(SCC_INDEX, gd->baudrate,
176 CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
178 m8560_cpm_setbrg(SCC_INDEX, gd->baudrate);
182 static void mpc85xx_serial_putc(const char c)
184 volatile scc_uart_t *up;
185 volatile cbd_t *tbdf;
186 volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
191 up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
192 tbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_tbase]);
194 /* Wait for last character to go.
196 while (tbdf->cbd_sc & BD_SC_READY)
199 /* Load the character into the transmit buffer.
201 *(volatile char *)tbdf->cbd_bufaddr = c;
202 tbdf->cbd_datlen = 1;
203 tbdf->cbd_sc |= BD_SC_READY;
206 static int mpc85xx_serial_getc(void)
208 volatile cbd_t *rbdf;
209 volatile scc_uart_t *up;
210 volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
213 up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
214 rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
216 /* Wait for character to show up.
218 while (rbdf->cbd_sc & BD_SC_EMPTY)
221 /* Grab the char and clear the buffer again.
223 c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
224 rbdf->cbd_sc |= BD_SC_EMPTY;
229 static int mpc85xx_serial_tstc(void)
231 volatile cbd_t *rbdf;
232 volatile scc_uart_t *up;
233 volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
235 up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
236 rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
238 return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
241 static struct serial_device mpc85xx_serial_drv = {
242 .name = "mpc85xx_serial",
243 .start = mpc85xx_serial_init,
245 .setbrg = mpc85xx_serial_setbrg,
246 .putc = mpc85xx_serial_putc,
247 .puts = default_serial_puts,
248 .getc = mpc85xx_serial_getc,
249 .tstc = mpc85xx_serial_tstc,
252 void mpc85xx_serial_initialize(void)
254 serial_register(&mpc85xx_serial_drv);
257 __weak struct serial_device *default_serial_console(void)
259 return &mpc85xx_serial_drv;
261 #endif /* CONFIG_CONS_ON_SCC */