]> git.sur5r.net Git - u-boot/blob - arch/sandbox/dts/sandbox.dts
arm: socfpga: set the mpuclk divider in the Altera group register
[u-boot] / arch / sandbox / dts / sandbox.dts
1 /dts-v1/;
2
3 #define USB_CLASS_HUB                   9
4
5 / {
6         #address-cells = <1>;
7         #size-cells = <1>;
8
9         aliases {
10                 eth5 = "/eth@90000000";
11                 i2c0 = &i2c_0;
12                 pci0 = &pci;
13                 rtc0 = &rtc_0;
14         };
15
16         chosen {
17                 stdout-path = "/serial";
18         };
19
20         cros_ec: cros-ec@0 {
21                 reg = <0 0>;
22                 compatible = "google,cros-ec-sandbox";
23
24                 /*
25                  * This describes the flash memory within the EC. Note
26                  * that the STM32L flash erases to 0, not 0xff.
27                  */
28                 #address-cells = <1>;
29                 #size-cells = <1>;
30                 flash@8000000 {
31                         reg = <0x08000000 0x20000>;
32                         erase-value = <0>;
33                         #address-cells = <1>;
34                         #size-cells = <1>;
35
36                         /* Information for sandbox */
37                         ro {
38                                 reg = <0 0xf000>;
39                         };
40                         wp-ro {
41                                 reg = <0xf000 0x1000>;
42                         };
43                         rw {
44                                 reg = <0x10000 0x10000>;
45                         };
46                 };
47         };
48
49         eth@10002000 {
50                 compatible = "sandbox,eth";
51                 reg = <0x10002000 0x1000>;
52                 fake-host-hwaddr = [00 00 66 44 22 00];
53         };
54
55         eth@80000000 {
56                 compatible = "sandbox,eth-raw";
57                 reg = <0x80000000 0x1000>;
58                 host-raw-interface = "eth0";
59         };
60
61         eth@90000000 {
62                 compatible = "sandbox,eth-raw";
63                 reg = <0x90000000 0x1000>;
64                 host-raw-interface = "lo";
65         };
66
67         gpio_a: gpios@0 {
68                 gpio-controller;
69                 compatible = "sandbox,gpio";
70                 #gpio-cells = <1>;
71                 gpio-bank-name = "a";
72                 num-gpios = <20>;
73         };
74
75         gpio_b: gpios@1 {
76                 gpio-controller;
77                 compatible = "sandbox,gpio";
78                 #gpio-cells = <2>;
79                 gpio-bank-name = "b";
80                 num-gpios = <10>;
81         };
82
83         hexagon {
84                 compatible = "demo-simple";
85                 colour = "white";
86                 sides = <6>;
87         };
88
89         i2c_0: i2c@0 {
90                 #address-cells = <1>;
91                 #size-cells = <0>;
92                 reg = <0 0>;
93                 compatible = "sandbox,i2c";
94                 clock-frequency = <400000>;
95                 pinctrl-names = "default";
96                 pinctrl-0 = <&pinctrl_i2c0>;
97                 eeprom@2c {
98                         reg = <0x2c>;
99                         compatible = "i2c-eeprom";
100                         emul {
101                                 compatible = "sandbox,i2c-eeprom";
102                                 sandbox,filename = "i2c.bin";
103                                 sandbox,size = <128>;
104                         };
105                 };
106
107                 rtc_0: rtc@43 {
108                         reg = <0x43>;
109                         compatible = "sandbox-rtc";
110                         emul {
111                                 compatible = "sandbox,i2c-rtc";
112                         };
113                 };
114                 sandbox_pmic: sandbox_pmic {
115                         reg = <0x40>;
116                 };
117         };
118
119         lcd {
120                 u-boot,dm-pre-reloc;
121                 compatible = "sandbox,lcd-sdl";
122                 xres = <1366>;
123                 yres = <768>;
124         };
125
126         pci: pci-controller {
127                 compatible = "sandbox,pci";
128                 device_type = "pci";
129                 #address-cells = <3>;
130                 #size-cells = <2>;
131                 ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000
132                                 0x01000000 0 0x20000000 0x20000000 0 0x2000>;
133                 pci@1f,0 {
134                         compatible = "pci-generic";
135                         reg = <0xf800 0 0 0 0>;
136                         emul@1f,0 {
137                                 compatible = "sandbox,swap-case";
138                         };
139                 };
140         };
141
142         pinctrl {
143                 compatible = "sandbox,pinctrl";
144
145                 pinctrl_i2c0: i2c0 {
146                         groups = "i2c";
147                         function = "i2c";
148                         bias-pull-up;
149                 };
150
151                 pinctrl_serial0: uart0 {
152                         groups = "serial_a";
153                         function = "serial";
154                 };
155         };
156
157         reset@1 {
158                 compatible = "sandbox,reset";
159         };
160
161         spi@0 {
162                 #address-cells = <1>;
163                 #size-cells = <0>;
164                 reg = <0 0>;
165                 compatible = "sandbox,spi";
166                 cs-gpios = <0>, <&gpio_a 0>;
167                 firmware_storage_spi: flash@0 {
168                         reg = <0>;
169                         compatible = "spansion,m25p16", "sandbox,spi-flash";
170                         spi-max-frequency = <40000000>;
171                         sandbox,filename = "spi.bin";
172                 };
173         };
174
175         spl-test {
176                 u-boot,dm-pre-reloc;
177                 compatible = "sandbox,spl-test";
178                 boolval;
179                 intval = <1>;
180                 intarray = <2 3 4>;
181                 byteval = [05];
182                 bytearray = [06];
183                 longbytearray = [09 0a 0b 0c 0d 0e 0f 10 11];
184                 stringval = "message";
185                 stringarray = "multi-word", "message";
186         };
187
188         spl-test2 {
189                 u-boot,dm-pre-reloc;
190                 compatible = "sandbox,spl-test";
191                 intval = <3>;
192                 intarray = <5>;
193                 byteval = [08];
194                 bytearray = [01 23 34];
195                 longbytearray = [09 0a 0b 0c];
196                 stringval = "message2";
197                 stringarray = "another", "multi-word", "message";
198         };
199
200         spl-test3 {
201                 u-boot,dm-pre-reloc;
202                 compatible = "sandbox,spl-test";
203                 stringarray = "one";
204         };
205
206         square {
207                 compatible = "demo-shape";
208                 colour = "blue";
209                 sides = <4>;
210         };
211
212         timer {
213                 compatible = "sandbox,timer";
214                 clock-frequency = <1000000>;
215         };
216
217         tpm {
218                 compatible = "google,sandbox-tpm";
219         };
220
221         triangle {
222                 compatible = "demo-shape";
223                 colour = "cyan";
224                 sides = <3>;
225                 character = <83>;
226                 light-gpios = <&gpio_a 2>, <&gpio_b 6 0>;
227         };
228
229         /* Needs to be available prior to relocation */
230         uart0: serial {
231                 compatible = "sandbox,serial";
232                 sandbox,text-colour = "cyan";
233                 pinctrl-names = "default";
234                 pinctrl-0 = <&pinctrl_serial0>;
235         };
236
237         usb@0 {
238                 compatible = "sandbox,usb";
239                 status = "disabled";
240                 hub {
241                         compatible = "sandbox,usb-hub";
242                         #address-cells = <1>;
243                         #size-cells = <0>;
244                         flash-stick {
245                                 reg = <0>;
246                                 compatible = "sandbox,usb-flash";
247                         };
248                 };
249         };
250
251         usb@1 {
252                 compatible = "sandbox,usb";
253                 hub {
254                         compatible = "usb-hub";
255                         usb,device-class = <USB_CLASS_HUB>;
256                         hub-emul {
257                                 compatible = "sandbox,usb-hub";
258                                 #address-cells = <1>;
259                                 #size-cells = <0>;
260                                 flash-stick {
261                                         reg = <0>;
262                                         compatible = "sandbox,usb-flash";
263                                         sandbox,filepath = "flash.bin";
264                                 };
265                         };
266                 };
267         };
268
269         usb@2 {
270                 compatible = "sandbox,usb";
271                 status = "disabled";
272         };
273
274         spmi: spmi@0 {
275                 compatible = "sandbox,spmi";
276                 #address-cells = <0x1>;
277                 #size-cells = <0x1>;
278                 pm8916@0 {
279                         compatible = "qcom,spmi-pmic";
280                         reg = <0x0 0x1>;
281                         #address-cells = <0x1>;
282                         #size-cells = <0x1>;
283
284                         spmi_gpios: gpios@c000 {
285                                 compatible = "qcom,pm8916-gpio";
286                                 reg = <0xc000 0x400>;
287                                 gpio-controller;
288                                 gpio-count = <4>;
289                                 #gpio-cells = <2>;
290                                 gpio-bank-name="spmi";
291                         };
292                 };
293         };
294 };
295
296 #include "cros-ec-keyboard.dtsi"
297 #include "sandbox_pmic.dtsi"