1 // SPDX-License-Identifier: GPL-2.0
4 * Copyright (C) 2008-2009 coresystems GmbH
12 #include <asm/pch_common.h>
14 #include <asm/arch/pch.h>
16 DECLARE_GLOBAL_DATA_PTR;
18 static void common_sata_init(struct udevice *dev, unsigned int port_map)
23 /* Set IDE I/O Configuration */
24 reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
25 dm_pci_write_config32(dev, IDE_CONFIG, reg32);
28 dm_pci_read_config16(dev, 0x92, ®16);
31 dm_pci_write_config16(dev, 0x92, reg16);
33 /* SATA Initialization register */
35 dm_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
38 static void bd82x6x_sata_init(struct udevice *dev, struct udevice *pch)
40 unsigned int port_map, speed_support, port_tx;
41 const void *blob = gd->fdt_blob;
42 int node = dev_of_offset(dev);
47 debug("SATA: Initializing...\n");
49 /* SATA configuration */
50 port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
51 speed_support = fdtdec_get_int(blob, node,
52 "sata_interface_speed_support", 0);
54 mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
55 if (!mode || !strcmp(mode, "ahci")) {
58 debug("SATA: Controller in AHCI mode\n");
61 dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
62 IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
63 IDE_PPE0 | IDE_IE0 | IDE_TIME0);
64 dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
65 IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
68 dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
69 dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
71 common_sata_init(dev, 0x8000 | port_map);
73 /* Initialize AHCI memory-mapped space */
74 abar = dm_pci_read_bar32(dev, 5);
75 debug("ABAR: %08lx\n", abar);
76 /* CAP (HBA Capabilities) : enable power management */
77 reg32 = readl(abar + 0x00);
78 reg32 |= 0x0c006000; /* set PSC+SSC+SALP+SSS */
79 reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */
80 /* Set ISS, if available */
83 reg32 |= (speed_support & 0x03) << 20;
85 writel(reg32, abar + 0x00);
86 /* PI (Ports implemented) */
87 writel(port_map, abar + 0x0c);
88 (void) readl(abar + 0x0c); /* Read back 1 */
89 (void) readl(abar + 0x0c); /* Read back 2 */
90 /* CAP2 (HBA Capabilities Extended)*/
91 reg32 = readl(abar + 0x24);
93 writel(reg32, abar + 0x24);
94 /* VSP (Vendor Specific Register */
95 reg32 = readl(abar + 0xa0);
97 writel(reg32, abar + 0xa0);
98 } else if (!strcmp(mode, "combined")) {
99 debug("SATA: Controller in combined mode\n");
101 /* No AHCI: clear AHCI base */
102 dm_pci_write_bar32(dev, 5, 0x00000000);
103 /* And without AHCI BAR no memory decoding */
104 dm_pci_read_config16(dev, PCI_COMMAND, ®16);
105 reg16 &= ~PCI_COMMAND_MEMORY;
106 dm_pci_write_config16(dev, PCI_COMMAND, reg16);
108 dm_pci_write_config8(dev, 0x09, 0x80);
111 dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
112 IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
113 dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
114 IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
115 IDE_PPE0 | IDE_IE0 | IDE_TIME0);
118 dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
119 dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
121 common_sata_init(dev, port_map);
123 debug("SATA: Controller in plain-ide mode\n");
125 /* No AHCI: clear AHCI base */
126 dm_pci_write_bar32(dev, 5, 0x00000000);
128 /* And without AHCI BAR no memory decoding */
129 dm_pci_read_config16(dev, PCI_COMMAND, ®16);
130 reg16 &= ~PCI_COMMAND_MEMORY;
131 dm_pci_write_config16(dev, PCI_COMMAND, reg16);
134 * Native mode capable on both primary and secondary (0xa)
135 * OR'ed with enabled (0x50) = 0xf
137 dm_pci_write_config8(dev, 0x09, 0x8f);
140 dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
141 IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
142 IDE_PPE0 | IDE_IE0 | IDE_TIME0);
143 dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
144 IDE_SITRE | IDE_ISP_3_CLOCKS |
145 IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
148 dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
149 dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
151 common_sata_init(dev, port_map);
154 /* Set Gen3 Transmitter settings if needed */
155 port_tx = fdtdec_get_int(blob, node, "intel,sata-port0-gen3-tx", 0);
157 pch_iobp_update(pch, SATA_IOBP_SP0G3IR, 0, port_tx);
159 port_tx = fdtdec_get_int(blob, node, "intel,sata-port1-gen3-tx", 0);
161 pch_iobp_update(pch, SATA_IOBP_SP1G3IR, 0, port_tx);
163 /* Additional Programming Requirements */
164 pch_common_sir_write(dev, 0x04, 0x00001600);
165 pch_common_sir_write(dev, 0x28, 0xa0000033);
166 reg32 = pch_common_sir_read(dev, 0x54);
169 pch_common_sir_write(dev, 0x54, reg32);
170 pch_common_sir_write(dev, 0x64, 0xcccc8484);
171 reg32 = pch_common_sir_read(dev, 0x68);
174 pch_common_sir_write(dev, 0x68, reg32);
175 reg32 = pch_common_sir_read(dev, 0x78);
178 pch_common_sir_write(dev, 0x78, reg32);
179 pch_common_sir_write(dev, 0x84, 0x001c7000);
180 pch_common_sir_write(dev, 0x88, 0x88338822);
181 pch_common_sir_write(dev, 0xa0, 0x001c7000);
182 pch_common_sir_write(dev, 0xc4, 0x0c0c0c0c);
183 pch_common_sir_write(dev, 0xc8, 0x0c0c0c0c);
184 pch_common_sir_write(dev, 0xd4, 0x10000000);
186 pch_iobp_update(pch, 0xea004001, 0x3fffffff, 0xc0000000);
187 pch_iobp_update(pch, 0xea00408a, 0xfffffcff, 0x00000100);
190 static void bd82x6x_sata_enable(struct udevice *dev)
192 const void *blob = gd->fdt_blob;
193 int node = dev_of_offset(dev);
199 * Set SATA controller mode early so the resource allocator can
200 * properly assign IO/Memory resources for the controller.
202 mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
203 if (mode && !strcmp(mode, "ahci"))
205 port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
207 map |= (port_map ^ 0x3f) << 8;
208 dm_pci_write_config16(dev, 0x90, map);
211 static int bd82x6x_sata_bind(struct udevice *dev)
213 struct udevice *scsi_dev;
216 if (gd->flags & GD_FLG_RELOC) {
217 ret = ahci_bind_scsi(dev, &scsi_dev);
225 static int bd82x6x_sata_probe(struct udevice *dev)
230 ret = uclass_first_device_err(UCLASS_PCH, &pch);
234 if (!(gd->flags & GD_FLG_RELOC))
235 bd82x6x_sata_enable(dev);
237 bd82x6x_sata_init(dev, pch);
238 ret = ahci_probe_scsi_pci(dev);
246 static const struct udevice_id bd82x6x_ahci_ids[] = {
247 { .compatible = "intel,pantherpoint-ahci" },
251 U_BOOT_DRIVER(ahci_ivybridge_drv) = {
252 .name = "ahci_ivybridge",
254 .of_match = bd82x6x_ahci_ids,
255 .bind = bd82x6x_sata_bind,
256 .probe = bd82x6x_sata_probe,