2 * Copyright (c) 2011 The Chromium OS Authors.
3 * (C) Copyright 2010,2011
4 * Graeme Russ, <graeme.russ@gmail.com>
6 * Portions from Coreboot mainboard/google/link/romstage.c
7 * Copyright (C) 2007-2010 coresystems GmbH
8 * Copyright (C) 2011 Google Inc.
10 * SPDX-License-Identifier: GPL-2.0
20 #include <spi_flash.h>
23 #include <asm/processor.h>
25 #include <asm/global_data.h>
26 #include <asm/intel_regs.h>
27 #include <asm/mrccache.h>
30 #include <asm/report_platform.h>
31 #include <asm/arch/me.h>
32 #include <asm/arch/pei_data.h>
33 #include <asm/arch/pch.h>
35 #include <asm/arch/sandybridge.h>
37 DECLARE_GLOBAL_DATA_PTR;
39 #define CMOS_OFFSET_MRC_SEED 152
40 #define CMOS_OFFSET_MRC_SEED_S3 156
41 #define CMOS_OFFSET_MRC_SEED_CHK 160
44 * This function looks for the highest region of memory lower than 4GB which
45 * has enough space for U-Boot where U-Boot is aligned on a page boundary.
46 * It overrides the default implementation found elsewhere which simply
47 * picks the end of ram, wherever that may be. The location of the stack,
48 * the relocation address, and how far U-Boot is moved by relocation are
49 * set in the global data structure.
51 ulong board_get_usable_ram_top(ulong total_size)
53 struct memory_info *info = &gd->arch.meminfo;
54 uintptr_t dest_addr = 0;
55 struct memory_area *largest = NULL;
58 /* Find largest area of memory below 4GB */
60 for (i = 0; i < info->num_areas; i++) {
61 struct memory_area *area = &info->area[i];
63 if (area->start >= 1ULL << 32)
65 if (!largest || area->size > largest->size)
69 /* If no suitable area was found, return an error. */
71 if (!largest || largest->size < (2 << 20))
72 panic("No available memory found for relocation");
74 dest_addr = largest->start + largest->size;
76 return (ulong)dest_addr;
79 void dram_init_banksize(void)
81 struct memory_info *info = &gd->arch.meminfo;
85 for (i = 0, num_banks = 0; i < info->num_areas; i++) {
86 struct memory_area *area = &info->area[i];
88 if (area->start >= 1ULL << 32)
90 gd->bd->bi_dram[num_banks].start = area->start;
91 gd->bd->bi_dram[num_banks].size = area->size;
96 static int read_seed_from_cmos(struct pei_data *pei_data)
98 u16 c1, c2, checksum, seed_checksum;
102 ret = uclass_get_device(UCLASS_RTC, 0, &dev);
104 debug("Cannot find RTC: err=%d\n", ret);
109 * Read scrambler seeds from CMOS RAM. We don't want to store them in
110 * SPI flash since they change on every boot and that would wear down
111 * the flash too much. So we store these in CMOS and the large MRC
114 ret = rtc_read32(dev, CMOS_OFFSET_MRC_SEED, &pei_data->scrambler_seed);
116 ret = rtc_read32(dev, CMOS_OFFSET_MRC_SEED_S3,
117 &pei_data->scrambler_seed_s3);
120 debug("Failed to read from RTC %s\n", dev->name);
124 debug("Read scrambler seed 0x%08x from CMOS 0x%02x\n",
125 pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED);
126 debug("Read S3 scrambler seed 0x%08x from CMOS 0x%02x\n",
127 pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3);
129 /* Compute seed checksum and compare */
130 c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed,
132 c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3,
134 checksum = add_ip_checksums(sizeof(u32), c1, c2);
136 seed_checksum = rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK);
137 seed_checksum |= rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1) << 8;
139 if (checksum != seed_checksum) {
140 debug("%s: invalid seed checksum\n", __func__);
141 pei_data->scrambler_seed = 0;
142 pei_data->scrambler_seed_s3 = 0;
149 static int prepare_mrc_cache(struct pei_data *pei_data)
151 struct mrc_data_container *mrc_cache;
152 struct mrc_region entry;
155 ret = read_seed_from_cmos(pei_data);
158 ret = mrccache_get_region(NULL, &entry);
161 mrc_cache = mrccache_find_current(&entry);
165 pei_data->mrc_input = mrc_cache->data;
166 pei_data->mrc_input_len = mrc_cache->data_size;
167 debug("%s: at %p, size %x checksum %04x\n", __func__,
168 pei_data->mrc_input, pei_data->mrc_input_len,
169 mrc_cache->checksum);
174 static int write_seeds_to_cmos(struct pei_data *pei_data)
176 u16 c1, c2, checksum;
180 ret = uclass_get_device(UCLASS_RTC, 0, &dev);
182 debug("Cannot find RTC: err=%d\n", ret);
186 /* Save the MRC seed values to CMOS */
187 rtc_write32(dev, CMOS_OFFSET_MRC_SEED, pei_data->scrambler_seed);
188 debug("Save scrambler seed 0x%08x to CMOS 0x%02x\n",
189 pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED);
191 rtc_write32(dev, CMOS_OFFSET_MRC_SEED_S3, pei_data->scrambler_seed_s3);
192 debug("Save s3 scrambler seed 0x%08x to CMOS 0x%02x\n",
193 pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3);
195 /* Save a simple checksum of the seed values */
196 c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed,
198 c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3,
200 checksum = add_ip_checksums(sizeof(u32), c1, c2);
202 rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK, checksum & 0xff);
203 rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1, (checksum >> 8) & 0xff);
208 /* Use this hook to save our SDRAM parameters */
209 int misc_init_r(void)
213 ret = mrccache_save();
215 printf("Unable to save MRC data: %d\n", ret);
220 static const char *const ecc_decoder[] = {
228 * Dump in the log memory controller configuration as read from the memory
229 * controller registers.
231 static void report_memory_config(void)
233 u32 addr_decoder_common, addr_decode_ch[2];
236 addr_decoder_common = readl(MCHBAR_REG(0x5000));
237 addr_decode_ch[0] = readl(MCHBAR_REG(0x5004));
238 addr_decode_ch[1] = readl(MCHBAR_REG(0x5008));
240 debug("memcfg DDR3 clock %d MHz\n",
241 (readl(MCHBAR_REG(0x5e04)) * 13333 * 2 + 50) / 100);
242 debug("memcfg channel assignment: A: %d, B % d, C % d\n",
243 addr_decoder_common & 3,
244 (addr_decoder_common >> 2) & 3,
245 (addr_decoder_common >> 4) & 3);
247 for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) {
248 u32 ch_conf = addr_decode_ch[i];
249 debug("memcfg channel[%d] config (%8.8x):\n", i, ch_conf);
250 debug(" ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]);
251 debug(" enhanced interleave mode %s\n",
252 ((ch_conf >> 22) & 1) ? "on" : "off");
253 debug(" rank interleave %s\n",
254 ((ch_conf >> 21) & 1) ? "on" : "off");
255 debug(" DIMMA %d MB width x%d %s rank%s\n",
256 ((ch_conf >> 0) & 0xff) * 256,
257 ((ch_conf >> 19) & 1) ? 16 : 8,
258 ((ch_conf >> 17) & 1) ? "dual" : "single",
259 ((ch_conf >> 16) & 1) ? "" : ", selected");
260 debug(" DIMMB %d MB width x%d %s rank%s\n",
261 ((ch_conf >> 8) & 0xff) * 256,
262 ((ch_conf >> 20) & 1) ? 16 : 8,
263 ((ch_conf >> 18) & 1) ? "dual" : "single",
264 ((ch_conf >> 16) & 1) ? ", selected" : "");
268 static void post_system_agent_init(struct pei_data *pei_data)
270 /* If PCIe init is skipped, set the PEG clock gating */
271 if (!pei_data->pcie_init)
272 setbits_le32(MCHBAR_REG(0x7010), 1);
275 static asmlinkage void console_tx_byte(unsigned char byte)
282 static int recovery_mode_enabled(void)
288 * Find the PEI executable in the ROM and execute it.
290 * @dev: Northbridge device
291 * @pei_data: configuration data for UEFI PEI reference code
293 int sdram_initialise(struct udevice *dev, struct udevice *me_dev,
294 struct pei_data *pei_data)
301 report_platform_info(dev);
303 /* Wait for ME to be ready */
304 ret = intel_early_me_init(me_dev);
307 ret = intel_early_me_uma_size(me_dev);
311 debug("Starting UEFI PEI System Agent\n");
314 * Do not pass MRC data in for recovery mode boot,
315 * Always pass it in for S3 resume.
317 if (!recovery_mode_enabled() ||
318 pei_data->boot_mode == PEI_BOOT_RESUME) {
319 ret = prepare_mrc_cache(pei_data);
321 debug("prepare_mrc_cache failed: %d\n", ret);
324 /* If MRC data is not found we cannot continue S3 resume. */
325 if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) {
326 debug("Giving up in sdram_initialize: No MRC data\n");
330 /* Pass console handler in pei_data */
331 pei_data->tx_byte = console_tx_byte;
333 debug("PEI data at %p, size %x:\n", pei_data, sizeof(*pei_data));
335 data = (char *)CONFIG_X86_MRC_ADDR;
338 int (*func)(struct pei_data *);
341 debug("Calling MRC at %p\n", data);
342 post_code(POST_PRE_MRC);
343 start = get_timer(0);
344 func = (int (*)(struct pei_data *))data;
350 printf("PEI version mismatch.\n");
353 printf("Invalid memory frequency.\n");
356 printf("MRC returned %x.\n", rv);
358 printf("Nonzero MRC return value.\n");
361 debug("MRC execution time %lu ms\n", get_timer(start));
363 printf("UEFI PEI System Agent not found.\n");
368 /* mrc.bin reconfigures USB, so reinit it to have debug */
369 early_usbdebug_init();
372 version = readl(MCHBAR_REG(0x5034));
373 debug("System Agent Version %d.%d.%d Build %d\n",
374 version >> 24 , (version >> 16) & 0xff,
375 (version >> 8) & 0xff, version & 0xff);
376 debug("MRC output data length %#x at %p\n", pei_data->mrc_output_len,
377 pei_data->mrc_output);
380 * Send ME init done for SandyBridge here. This is done inside the
381 * SystemAgent binary on IvyBridge
383 dm_pci_read_config16(dev, PCI_DEVICE_ID, &done);
384 done &= BASE_REV_MASK;
385 if (BASE_REV_SNB == done)
386 intel_early_me_init_done(dev, me_dev, ME_INIT_STATUS_SUCCESS);
388 intel_me_status(me_dev);
390 post_system_agent_init(pei_data);
391 report_memory_config();
393 /* S3 resume: don't save scrambler seed or MRC data */
394 if (pei_data->boot_mode != PEI_BOOT_RESUME) {
396 * This will be copied to SDRAM in reserve_arch(), then written
397 * to SPI flash in mrccache_save()
399 gd->arch.mrc_output = (char *)pei_data->mrc_output;
400 gd->arch.mrc_output_len = pei_data->mrc_output_len;
401 ret = write_seeds_to_cmos(pei_data);
403 debug("Failed to write seeds to CMOS: %d\n", ret);
409 int reserve_arch(void)
411 return mrccache_reserve();
414 static int copy_spd(struct pei_data *peid)
416 const int gpio_vector[] = {41, 42, 43, 10, -1};
418 const void *blob = gd->fdt_blob;
423 if (gpio_vector[i] == -1)
425 ret = gpio_requestf(gpio_vector[i], "spd_id%d", i);
427 debug("%s: Could not request gpio %d\n", __func__,
432 spd_index = gpio_get_values_as_int(gpio_vector);
433 debug("spd index %d\n", spd_index);
434 node = fdtdec_next_compatible(blob, 0, COMPAT_MEMORY_SPD);
436 printf("SPD data not found.\n");
440 for (spd_node = fdt_first_subnode(blob, node);
442 spd_node = fdt_next_subnode(blob, spd_node)) {
446 if (fdtdec_get_int(blob, spd_node, "reg", -1) != spd_index)
448 data = fdt_getprop(blob, spd_node, "data", &len);
449 if (len < sizeof(peid->spd_data[0])) {
450 printf("Missing SPD data\n");
454 debug("Using SDRAM SPD data for '%s'\n",
455 fdt_get_name(blob, spd_node, NULL));
456 memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0]));
461 printf("No SPD data found for index %d\n", spd_index);
469 * add_memory_area() - Add a new usable memory area to our list
471 * Note: @start and @end must not span the first 4GB boundary
473 * @info: Place to store memory info
474 * @start: Start of this memory area
475 * @end: End of this memory area + 1
477 static int add_memory_area(struct memory_info *info,
478 uint64_t start, uint64_t end)
480 struct memory_area *ptr;
482 if (info->num_areas == CONFIG_NR_DRAM_BANKS)
485 ptr = &info->area[info->num_areas];
487 ptr->size = end - start;
488 info->total_memory += ptr->size;
489 if (ptr->start < (1ULL << 32))
490 info->total_32bit_memory += ptr->size;
491 debug("%d: memory %llx size %llx, total now %llx / %llx\n",
492 info->num_areas, ptr->start, ptr->size,
493 info->total_32bit_memory, info->total_memory);
500 * sdram_find() - Find available memory
502 * This is a bit complicated since on x86 there are system memory holes all
503 * over the place. We create a list of available memory blocks
505 * @dev: Northbridge device
507 static int sdram_find(struct udevice *dev)
509 struct memory_info *info = &gd->arch.meminfo;
510 uint32_t tseg_base, uma_size, tolud;
511 uint64_t tom, me_base, touud;
512 uint64_t uma_memory_base = 0;
513 uint64_t uma_memory_size;
514 unsigned long long tomk;
518 /* Total Memory 2GB example:
520 * 00000000 0000MB-1992MB 1992MB RAM (writeback)
521 * 7c800000 1992MB-2000MB 8MB TSEG (SMRR)
522 * 7d000000 2000MB-2002MB 2MB GFX GTT (uncached)
523 * 7d200000 2002MB-2034MB 32MB GFX UMA (uncached)
524 * 7f200000 2034MB TOLUD
525 * 7f800000 2040MB MEBASE
526 * 7f800000 2040MB-2048MB 8MB ME UMA (uncached)
527 * 80000000 2048MB TOM
528 * 100000000 4096MB-4102MB 6MB RAM (writeback)
530 * Total Memory 4GB example:
532 * 00000000 0000MB-2768MB 2768MB RAM (writeback)
533 * ad000000 2768MB-2776MB 8MB TSEG (SMRR)
534 * ad800000 2776MB-2778MB 2MB GFX GTT (uncached)
535 * ada00000 2778MB-2810MB 32MB GFX UMA (uncached)
536 * afa00000 2810MB TOLUD
537 * ff800000 4088MB MEBASE
538 * ff800000 4088MB-4096MB 8MB ME UMA (uncached)
539 * 100000000 4096MB TOM
540 * 100000000 4096MB-5374MB 1278MB RAM (writeback)
541 * 14fe00000 5368MB TOUUD
544 /* Top of Upper Usable DRAM, including remap */
545 dm_pci_read_config32(dev, TOUUD + 4, &val);
546 touud = (uint64_t)val << 32;
547 dm_pci_read_config32(dev, TOUUD, &val);
550 /* Top of Lower Usable DRAM */
551 dm_pci_read_config32(dev, TOLUD, &tolud);
553 /* Top of Memory - does not account for any UMA */
554 dm_pci_read_config32(dev, 0xa4, &val);
555 tom = (uint64_t)val << 32;
556 dm_pci_read_config32(dev, 0xa0, &val);
559 debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom);
561 /* ME UMA needs excluding if total memory <4GB */
562 dm_pci_read_config32(dev, 0x74, &val);
563 me_base = (uint64_t)val << 32;
564 dm_pci_read_config32(dev, 0x70, &val);
567 debug("MEBASE %llx\n", me_base);
569 /* TODO: Get rid of all this shifting by 10 bits */
571 if (me_base == tolud) {
572 /* ME is from MEBASE-TOM */
573 uma_size = (tom - me_base) >> 10;
574 /* Increment TOLUD to account for ME as RAM */
575 tolud += uma_size << 10;
576 /* UMA starts at old TOLUD */
577 uma_memory_base = tomk * 1024ULL;
578 uma_memory_size = uma_size * 1024ULL;
579 debug("ME UMA base %llx size %uM\n", me_base, uma_size >> 10);
582 /* Graphics memory comes next */
583 dm_pci_read_config16(dev, GGC, &ggc);
585 debug("IGD decoded, subtracting ");
587 /* Graphics memory */
588 uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL;
589 debug("%uM UMA", uma_size >> 10);
591 uma_memory_base = tomk * 1024ULL;
592 uma_memory_size += uma_size * 1024ULL;
594 /* GTT Graphics Stolen Memory Size (GGMS) */
595 uma_size = ((ggc >> 8) & 0x3) * 1024ULL;
597 uma_memory_base = tomk * 1024ULL;
598 uma_memory_size += uma_size * 1024ULL;
599 debug(" and %uM GTT\n", uma_size >> 10);
602 /* Calculate TSEG size from its base which must be below GTT */
603 dm_pci_read_config32(dev, 0xb8, &tseg_base);
604 uma_size = (uma_memory_base - tseg_base) >> 10;
606 uma_memory_base = tomk * 1024ULL;
607 uma_memory_size += uma_size * 1024ULL;
608 debug("TSEG base 0x%08x size %uM\n", tseg_base, uma_size >> 10);
610 debug("Available memory below 4GB: %lluM\n", tomk >> 10);
612 /* Report the memory regions */
613 add_memory_area(info, 1 << 20, 2 << 28);
614 add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28);
615 add_memory_area(info, (4 << 28) + (2 << 20), tseg_base);
616 add_memory_area(info, 1ULL << 32, touud);
618 /* Add MTRRs for memory */
619 mtrr_add_request(MTRR_TYPE_WRBACK, 0, 2ULL << 30);
620 mtrr_add_request(MTRR_TYPE_WRBACK, 2ULL << 30, 512 << 20);
621 mtrr_add_request(MTRR_TYPE_WRBACK, 0xaULL << 28, 256 << 20);
622 mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base, 16 << 20);
623 mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base + (16 << 20),
627 * If >= 4GB installed then memory from TOLUD to 4GB
628 * is remapped above TOM, TOUUD will account for both
630 if (touud > (1ULL << 32ULL)) {
631 debug("Available memory above 4GB: %lluM\n",
632 (touud >> 20) - 4096);
638 static void rcba_config(void)
641 * GFX INTA -> PIRQA (MSI)
642 * D28IP_P3IP WLAN INTA -> PIRQB
643 * D29IP_E1P EHCI1 INTA -> PIRQD
644 * D26IP_E2P EHCI2 INTA -> PIRQF
645 * D31IP_SIP SATA INTA -> PIRQF (MSI)
646 * D31IP_SMIP SMBUS INTB -> PIRQH
647 * D31IP_TTIP THRT INTC -> PIRQA
648 * D27IP_ZIP HDA INTA -> PIRQA (MSI)
650 * TRACKPAD -> PIRQE (Edge Triggered)
651 * TOUCHSCREEN -> PIRQG (Edge Triggered)
654 /* Device interrupt pin register (board specific) */
655 writel((INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
656 (INTB << D31IP_SMIP) | (INTA << D31IP_SIP), RCB_REG(D31IP));
657 writel(NOINT << D30IP_PIP, RCB_REG(D30IP));
658 writel(INTA << D29IP_E1P, RCB_REG(D29IP));
659 writel(INTA << D28IP_P3IP, RCB_REG(D28IP));
660 writel(INTA << D27IP_ZIP, RCB_REG(D27IP));
661 writel(INTA << D26IP_E2P, RCB_REG(D26IP));
662 writel(NOINT << D25IP_LIP, RCB_REG(D25IP));
663 writel(NOINT << D22IP_MEI1IP, RCB_REG(D22IP));
665 /* Device interrupt route registers */
666 writel(DIR_ROUTE(PIRQB, PIRQH, PIRQA, PIRQC), RCB_REG(D31IR));
667 writel(DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG), RCB_REG(D29IR));
668 writel(DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE), RCB_REG(D28IR));
669 writel(DIR_ROUTE(PIRQA, PIRQH, PIRQA, PIRQB), RCB_REG(D27IR));
670 writel(DIR_ROUTE(PIRQF, PIRQE, PIRQG, PIRQH), RCB_REG(D26IR));
671 writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D25IR));
672 writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D22IR));
674 /* Enable IOAPIC (generic) */
675 writew(0x0100, RCB_REG(OIC));
676 /* PCH BWG says to read back the IOAPIC enable register */
677 (void)readw(RCB_REG(OIC));
679 /* Disable unused devices (board specific) */
680 setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS);
685 struct pei_data pei_data __aligned(8) = {
686 .pei_version = PEI_VERSION,
687 .mchbar = MCH_BASE_ADDRESS,
688 .dmibar = DEFAULT_DMIBAR,
689 .epbar = DEFAULT_EPBAR,
690 .pciexbar = CONFIG_PCIE_ECAM_BASE,
691 .smbusbar = SMBUS_IO_BASE,
694 .hpet_address = CONFIG_HPET_ADDRESS,
695 .rcba = DEFAULT_RCBABASE,
696 .pmbase = DEFAULT_PMBASE,
697 .gpiobase = DEFAULT_GPIOBASE,
698 .thermalbase = 0xfed08000,
699 .system_type = 0, /* 0 Mobile, 1 Desktop/Server */
700 .tseg_size = CONFIG_SMM_TSEG_SIZE,
701 .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
705 * 0 = leave channel enabled
706 * 1 = disable dimm 0 on channel
707 * 2 = disable dimm 1 on channel
708 * 3 = disable dimm 0+1 on channel
710 .dimm_channel0_disabled = 2,
711 .dimm_channel1_disabled = 2,
712 .max_ddr3_freq = 1600,
715 * Empty and onboard Ports 0-7, set to un-used pin
718 { 0, 3, 0x0000 }, /* P0= Empty */
719 { 1, 0, 0x0040 }, /* P1= Left USB 1 (OC0) */
720 { 1, 1, 0x0040 }, /* P2= Left USB 2 (OC1) */
721 { 1, 3, 0x0040 }, /* P3= SDCARD (no OC) */
722 { 0, 3, 0x0000 }, /* P4= Empty */
723 { 1, 3, 0x0040 }, /* P5= WWAN (no OC) */
724 { 0, 3, 0x0000 }, /* P6= Empty */
725 { 0, 3, 0x0000 }, /* P7= Empty */
727 * Empty and onboard Ports 8-13, set to un-used pin
730 { 1, 4, 0x0040 }, /* P8= Camera (no OC) */
731 { 1, 4, 0x0040 }, /* P9= Bluetooth (no OC) */
732 { 0, 4, 0x0000 }, /* P10= Empty */
733 { 0, 4, 0x0000 }, /* P11= Empty */
734 { 0, 4, 0x0000 }, /* P12= Empty */
735 { 0, 4, 0x0000 }, /* P13= Empty */
738 struct udevice *dev, *me_dev;
741 ret = uclass_first_device_err(UCLASS_NORTHBRIDGE, &dev);
744 ret = syscon_get_by_driver_data(X86_SYSCON_ME, &me_dev);
747 debug("Boot mode %d\n", gd->arch.pei_boot_mode);
748 debug("mrc_input %p\n", pei_data.mrc_input);
749 pei_data.boot_mode = gd->arch.pei_boot_mode;
750 ret = copy_spd(&pei_data);
752 ret = sdram_initialise(dev, me_dev, &pei_data);
759 writew(0xCAFE, MCHBAR_REG(SSKPD));
761 post_code(POST_DRAM);
763 ret = sdram_find(dev);
767 gd->ram_size = gd->arch.meminfo.total_32bit_memory;