]> git.sur5r.net Git - u-boot/blob - arch/x86/cpu/mp_init.c
Merge branch 'master' of git://git.denx.de/u-boot-x86
[u-boot] / arch / x86 / cpu / mp_init.c
1 /*
2  * Copyright (C) 2015 Google, Inc
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  *
6  * Based on code from the coreboot file of the same name
7  */
8
9 #include <common.h>
10 #include <cpu.h>
11 #include <dm.h>
12 #include <errno.h>
13 #include <malloc.h>
14 #include <qfw.h>
15 #include <asm/atomic.h>
16 #include <asm/cpu.h>
17 #include <asm/interrupt.h>
18 #include <asm/lapic.h>
19 #include <asm/microcode.h>
20 #include <asm/mp.h>
21 #include <asm/msr.h>
22 #include <asm/mtrr.h>
23 #include <asm/processor.h>
24 #include <asm/sipi.h>
25 #include <dm/device-internal.h>
26 #include <dm/uclass-internal.h>
27 #include <dm/lists.h>
28 #include <dm/root.h>
29 #include <linux/linkage.h>
30
31 DECLARE_GLOBAL_DATA_PTR;
32
33 /* Total CPUs include BSP */
34 static int num_cpus;
35
36 /* This also needs to match the sipi.S assembly code for saved MSR encoding */
37 struct saved_msr {
38         uint32_t index;
39         uint32_t lo;
40         uint32_t hi;
41 } __packed;
42
43
44 struct mp_flight_plan {
45         int num_records;
46         struct mp_flight_record *records;
47 };
48
49 static struct mp_flight_plan mp_info;
50
51 struct cpu_map {
52         struct udevice *dev;
53         int apic_id;
54         int err_code;
55 };
56
57 static inline void barrier_wait(atomic_t *b)
58 {
59         while (atomic_read(b) == 0)
60                 asm("pause");
61         mfence();
62 }
63
64 static inline void release_barrier(atomic_t *b)
65 {
66         mfence();
67         atomic_set(b, 1);
68 }
69
70 static inline void stop_this_cpu(void)
71 {
72         /* Called by an AP when it is ready to halt and wait for a new task */
73         for (;;)
74                 cpu_hlt();
75 }
76
77 /* Returns 1 if timeout waiting for APs. 0 if target APs found */
78 static int wait_for_aps(atomic_t *val, int target, int total_delay,
79                         int delay_step)
80 {
81         int timeout = 0;
82         int delayed = 0;
83
84         while (atomic_read(val) != target) {
85                 udelay(delay_step);
86                 delayed += delay_step;
87                 if (delayed >= total_delay) {
88                         timeout = 1;
89                         break;
90                 }
91         }
92
93         return timeout;
94 }
95
96 static void ap_do_flight_plan(struct udevice *cpu)
97 {
98         int i;
99
100         for (i = 0; i < mp_info.num_records; i++) {
101                 struct mp_flight_record *rec = &mp_info.records[i];
102
103                 atomic_inc(&rec->cpus_entered);
104                 barrier_wait(&rec->barrier);
105
106                 if (rec->ap_call != NULL)
107                         rec->ap_call(cpu, rec->ap_arg);
108         }
109 }
110
111 static int find_cpu_by_apic_id(int apic_id, struct udevice **devp)
112 {
113         struct udevice *dev;
114
115         *devp = NULL;
116         for (uclass_find_first_device(UCLASS_CPU, &dev);
117              dev;
118              uclass_find_next_device(&dev)) {
119                 struct cpu_platdata *plat = dev_get_parent_platdata(dev);
120
121                 if (plat->cpu_id == apic_id) {
122                         *devp = dev;
123                         return 0;
124                 }
125         }
126
127         return -ENOENT;
128 }
129
130 /*
131  * By the time APs call ap_init() caching has been setup, and microcode has
132  * been loaded
133  */
134 static void ap_init(unsigned int cpu_index)
135 {
136         struct udevice *dev;
137         int apic_id;
138         int ret;
139
140         /* Ensure the local apic is enabled */
141         enable_lapic();
142
143         apic_id = lapicid();
144         ret = find_cpu_by_apic_id(apic_id, &dev);
145         if (ret) {
146                 debug("Unknown CPU apic_id %x\n", apic_id);
147                 goto done;
148         }
149
150         debug("AP: slot %d apic_id %x, dev %s\n", cpu_index, apic_id,
151               dev ? dev->name : "(apic_id not found)");
152
153         /* Walk the flight plan */
154         ap_do_flight_plan(dev);
155
156         /* Park the AP */
157         debug("parking\n");
158 done:
159         stop_this_cpu();
160 }
161
162 static const unsigned int fixed_mtrrs[NUM_FIXED_MTRRS] = {
163         MTRR_FIX_64K_00000_MSR, MTRR_FIX_16K_80000_MSR, MTRR_FIX_16K_A0000_MSR,
164         MTRR_FIX_4K_C0000_MSR, MTRR_FIX_4K_C8000_MSR, MTRR_FIX_4K_D0000_MSR,
165         MTRR_FIX_4K_D8000_MSR, MTRR_FIX_4K_E0000_MSR, MTRR_FIX_4K_E8000_MSR,
166         MTRR_FIX_4K_F0000_MSR, MTRR_FIX_4K_F8000_MSR,
167 };
168
169 static inline struct saved_msr *save_msr(int index, struct saved_msr *entry)
170 {
171         msr_t msr;
172
173         msr = msr_read(index);
174         entry->index = index;
175         entry->lo = msr.lo;
176         entry->hi = msr.hi;
177
178         /* Return the next entry */
179         entry++;
180         return entry;
181 }
182
183 static int save_bsp_msrs(char *start, int size)
184 {
185         int msr_count;
186         int num_var_mtrrs;
187         struct saved_msr *msr_entry;
188         int i;
189         msr_t msr;
190
191         /* Determine number of MTRRs need to be saved */
192         msr = msr_read(MTRR_CAP_MSR);
193         num_var_mtrrs = msr.lo & 0xff;
194
195         /* 2 * num_var_mtrrs for base and mask. +1 for IA32_MTRR_DEF_TYPE */
196         msr_count = 2 * num_var_mtrrs + NUM_FIXED_MTRRS + 1;
197
198         if ((msr_count * sizeof(struct saved_msr)) > size) {
199                 printf("Cannot mirror all %d msrs\n", msr_count);
200                 return -ENOSPC;
201         }
202
203         msr_entry = (void *)start;
204         for (i = 0; i < NUM_FIXED_MTRRS; i++)
205                 msr_entry = save_msr(fixed_mtrrs[i], msr_entry);
206
207         for (i = 0; i < num_var_mtrrs; i++) {
208                 msr_entry = save_msr(MTRR_PHYS_BASE_MSR(i), msr_entry);
209                 msr_entry = save_msr(MTRR_PHYS_MASK_MSR(i), msr_entry);
210         }
211
212         msr_entry = save_msr(MTRR_DEF_TYPE_MSR, msr_entry);
213
214         return msr_count;
215 }
216
217 static int load_sipi_vector(atomic_t **ap_countp, int num_cpus)
218 {
219         struct sipi_params_16bit *params16;
220         struct sipi_params *params;
221         static char msr_save[512];
222         char *stack;
223         ulong addr;
224         int code_len;
225         int size;
226         int ret;
227
228         /* Copy in the code */
229         code_len = ap_start16_code_end - ap_start16;
230         debug("Copying SIPI code to %x: %d bytes\n", AP_DEFAULT_BASE,
231               code_len);
232         memcpy((void *)AP_DEFAULT_BASE, ap_start16, code_len);
233
234         addr = AP_DEFAULT_BASE + (ulong)sipi_params_16bit - (ulong)ap_start16;
235         params16 = (struct sipi_params_16bit *)addr;
236         params16->ap_start = (uint32_t)ap_start;
237         params16->gdt = (uint32_t)gd->arch.gdt;
238         params16->gdt_limit = X86_GDT_SIZE - 1;
239         debug("gdt = %x, gdt_limit = %x\n", params16->gdt, params16->gdt_limit);
240
241         params = (struct sipi_params *)sipi_params;
242         debug("SIPI 32-bit params at %p\n", params);
243         params->idt_ptr = (uint32_t)x86_get_idt();
244
245         params->stack_size = CONFIG_AP_STACK_SIZE;
246         size = params->stack_size * num_cpus;
247         stack = memalign(4096, size);
248         if (!stack)
249                 return -ENOMEM;
250         params->stack_top = (u32)(stack + size);
251 #if !defined(CONFIG_QEMU) && !defined(CONFIG_HAVE_FSP)
252         params->microcode_ptr = ucode_base;
253         debug("Microcode at %x\n", params->microcode_ptr);
254 #endif
255         params->msr_table_ptr = (u32)msr_save;
256         ret = save_bsp_msrs(msr_save, sizeof(msr_save));
257         if (ret < 0)
258                 return ret;
259         params->msr_count = ret;
260
261         params->c_handler = (uint32_t)&ap_init;
262
263         *ap_countp = &params->ap_count;
264         atomic_set(*ap_countp, 0);
265         debug("SIPI vector is ready\n");
266
267         return 0;
268 }
269
270 static int check_cpu_devices(int expected_cpus)
271 {
272         int i;
273
274         for (i = 0; i < expected_cpus; i++) {
275                 struct udevice *dev;
276                 int ret;
277
278                 ret = uclass_find_device(UCLASS_CPU, i, &dev);
279                 if (ret) {
280                         debug("Cannot find CPU %d in device tree\n", i);
281                         return ret;
282                 }
283         }
284
285         return 0;
286 }
287
288 /* Returns 1 for timeout. 0 on success */
289 static int apic_wait_timeout(int total_delay, const char *msg)
290 {
291         int total = 0;
292
293         if (!(lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY))
294                 return 0;
295
296         debug("Waiting for %s...", msg);
297         while (lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY) {
298                 udelay(50);
299                 total += 50;
300                 if (total >= total_delay) {
301                         debug("timed out: aborting\n");
302                         return -ETIMEDOUT;
303                 }
304         }
305         debug("done\n");
306
307         return 0;
308 }
309
310 static int start_aps(int ap_count, atomic_t *num_aps)
311 {
312         int sipi_vector;
313         /* Max location is 4KiB below 1MiB */
314         const int max_vector_loc = ((1 << 20) - (1 << 12)) >> 12;
315
316         if (ap_count == 0)
317                 return 0;
318
319         /* The vector is sent as a 4k aligned address in one byte */
320         sipi_vector = AP_DEFAULT_BASE >> 12;
321
322         if (sipi_vector > max_vector_loc) {
323                 printf("SIPI vector too large! 0x%08x\n",
324                        sipi_vector);
325                 return -1;
326         }
327
328         debug("Attempting to start %d APs\n", ap_count);
329
330         if (apic_wait_timeout(1000, "ICR not to be busy"))
331                 return -ETIMEDOUT;
332
333         /* Send INIT IPI to all but self */
334         lapic_write(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0));
335         lapic_write(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT |
336                     LAPIC_DM_INIT);
337         debug("Waiting for 10ms after sending INIT\n");
338         mdelay(10);
339
340         /* Send 1st SIPI */
341         if (apic_wait_timeout(1000, "ICR not to be busy"))
342                 return -ETIMEDOUT;
343
344         lapic_write(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0));
345         lapic_write(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT |
346                     LAPIC_DM_STARTUP | sipi_vector);
347         if (apic_wait_timeout(10000, "first SIPI to complete"))
348                 return -ETIMEDOUT;
349
350         /* Wait for CPUs to check in up to 200 us */
351         wait_for_aps(num_aps, ap_count, 200, 15);
352
353         /* Send 2nd SIPI */
354         if (apic_wait_timeout(1000, "ICR not to be busy"))
355                 return -ETIMEDOUT;
356
357         lapic_write(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(0));
358         lapic_write(LAPIC_ICR, LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT |
359                     LAPIC_DM_STARTUP | sipi_vector);
360         if (apic_wait_timeout(10000, "second SIPI to complete"))
361                 return -ETIMEDOUT;
362
363         /* Wait for CPUs to check in */
364         if (wait_for_aps(num_aps, ap_count, 10000, 50)) {
365                 debug("Not all APs checked in: %d/%d\n",
366                       atomic_read(num_aps), ap_count);
367                 return -1;
368         }
369
370         return 0;
371 }
372
373 static int bsp_do_flight_plan(struct udevice *cpu, struct mp_params *mp_params)
374 {
375         int i;
376         int ret = 0;
377         const int timeout_us = 100000;
378         const int step_us = 100;
379         int num_aps = num_cpus - 1;
380
381         for (i = 0; i < mp_params->num_records; i++) {
382                 struct mp_flight_record *rec = &mp_params->flight_plan[i];
383
384                 /* Wait for APs if the record is not released */
385                 if (atomic_read(&rec->barrier) == 0) {
386                         /* Wait for the APs to check in */
387                         if (wait_for_aps(&rec->cpus_entered, num_aps,
388                                          timeout_us, step_us)) {
389                                 debug("MP record %d timeout\n", i);
390                                 ret = -1;
391                         }
392                 }
393
394                 if (rec->bsp_call != NULL)
395                         rec->bsp_call(cpu, rec->bsp_arg);
396
397                 release_barrier(&rec->barrier);
398         }
399         return ret;
400 }
401
402 static int init_bsp(struct udevice **devp)
403 {
404         char processor_name[CPU_MAX_NAME_LEN];
405         int apic_id;
406         int ret;
407
408         cpu_get_name(processor_name);
409         debug("CPU: %s\n", processor_name);
410
411         apic_id = lapicid();
412         ret = find_cpu_by_apic_id(apic_id, devp);
413         if (ret) {
414                 printf("Cannot find boot CPU, APIC ID %d\n", apic_id);
415                 return ret;
416         }
417
418         return 0;
419 }
420
421 #ifdef CONFIG_QFW
422 static int qemu_cpu_fixup(void)
423 {
424         int ret;
425         int cpu_num;
426         int cpu_online;
427         struct udevice *dev, *pdev;
428         struct cpu_platdata *plat;
429         char *cpu;
430
431         /* first we need to find '/cpus' */
432         for (device_find_first_child(dm_root(), &pdev);
433              pdev;
434              device_find_next_child(&pdev)) {
435                 if (!strcmp(pdev->name, "cpus"))
436                         break;
437         }
438         if (!pdev) {
439                 printf("unable to find cpus device\n");
440                 return -ENODEV;
441         }
442
443         /* calculate cpus that are already bound */
444         cpu_num = 0;
445         for (uclass_find_first_device(UCLASS_CPU, &dev);
446              dev;
447              uclass_find_next_device(&dev)) {
448                 cpu_num++;
449         }
450
451         /* get actual cpu number */
452         cpu_online = qemu_fwcfg_online_cpus();
453         if (cpu_online < 0) {
454                 printf("unable to get online cpu number: %d\n", cpu_online);
455                 return cpu_online;
456         }
457
458         /* bind addtional cpus */
459         dev = NULL;
460         for (; cpu_num < cpu_online; cpu_num++) {
461                 /*
462                  * allocate device name here as device_bind_driver() does
463                  * not copy device name, 8 bytes are enough for
464                  * sizeof("cpu@") + 3 digits cpu number + '\0'
465                  */
466                 cpu = malloc(8);
467                 if (!cpu) {
468                         printf("unable to allocate device name\n");
469                         return -ENOMEM;
470                 }
471                 sprintf(cpu, "cpu@%d", cpu_num);
472                 ret = device_bind_driver(pdev, "cpu_qemu", cpu, &dev);
473                 if (ret) {
474                         printf("binding cpu@%d failed: %d\n", cpu_num, ret);
475                         return ret;
476                 }
477                 plat = dev_get_parent_platdata(dev);
478                 plat->cpu_id = cpu_num;
479         }
480         return 0;
481 }
482 #endif
483
484 int mp_init(struct mp_params *p)
485 {
486         int num_aps;
487         atomic_t *ap_count;
488         struct udevice *cpu;
489         int ret;
490
491         /* This will cause the CPUs devices to be bound */
492         struct uclass *uc;
493         ret = uclass_get(UCLASS_CPU, &uc);
494         if (ret)
495                 return ret;
496
497 #ifdef CONFIG_QFW
498         ret = qemu_cpu_fixup();
499         if (ret)
500                 return ret;
501 #endif
502
503         ret = init_bsp(&cpu);
504         if (ret) {
505                 debug("Cannot init boot CPU: err=%d\n", ret);
506                 return ret;
507         }
508
509         if (p == NULL || p->flight_plan == NULL || p->num_records < 1) {
510                 printf("Invalid MP parameters\n");
511                 return -1;
512         }
513
514         num_cpus = cpu_get_count(cpu);
515         if (num_cpus < 0) {
516                 debug("Cannot get number of CPUs: err=%d\n", num_cpus);
517                 return num_cpus;
518         }
519
520         if (num_cpus < 2)
521                 debug("Warning: Only 1 CPU is detected\n");
522
523         ret = check_cpu_devices(num_cpus);
524         if (ret)
525                 debug("Warning: Device tree does not describe all CPUs. Extra ones will not be started correctly\n");
526
527         /* Copy needed parameters so that APs have a reference to the plan */
528         mp_info.num_records = p->num_records;
529         mp_info.records = p->flight_plan;
530
531         /* Load the SIPI vector */
532         ret = load_sipi_vector(&ap_count, num_cpus);
533         if (ap_count == NULL)
534                 return -1;
535
536         /*
537          * Make sure SIPI data hits RAM so the APs that come up will see
538          * the startup code even if the caches are disabled
539          */
540         wbinvd();
541
542         /* Start the APs providing number of APs and the cpus_entered field */
543         num_aps = num_cpus - 1;
544         ret = start_aps(num_aps, ap_count);
545         if (ret) {
546                 mdelay(1000);
547                 debug("%d/%d eventually checked in?\n", atomic_read(ap_count),
548                       num_aps);
549                 return ret;
550         }
551
552         /* Walk the flight plan for the BSP */
553         ret = bsp_do_flight_plan(cpu, p);
554         if (ret) {
555                 debug("CPU init failed: err=%d\n", ret);
556                 return ret;
557         }
558
559         return 0;
560 }
561
562 int mp_init_cpu(struct udevice *cpu, void *unused)
563 {
564         struct cpu_platdata *plat = dev_get_parent_platdata(cpu);
565
566         /*
567          * Multiple APs are brought up simultaneously and they may get the same
568          * seq num in the uclass_resolve_seq() during device_probe(). To avoid
569          * this, set req_seq to the reg number in the device tree in advance.
570          */
571         cpu->req_seq = fdtdec_get_int(gd->fdt_blob, cpu->of_offset, "reg", -1);
572         plat->ucode_version = microcode_read_rev();
573         plat->device_id = gd->arch.x86_device;
574
575         return device_probe(cpu);
576 }