1 /* This file is generated by Preloader Generator */
3 #ifndef _PRELOADER_PINMUX_CONFIG_H_
4 #define _PRELOADER_PINMUX_CONFIG_H_
7 * State of enabling for which IP connected out through the muxing.
8 * Value 1 mean the IP connection is muxed out
10 #define CONFIG_HPS_EMAC0 (0)
11 #define CONFIG_HPS_EMAC1 (1)
12 #define CONFIG_HPS_USB0 (0)
13 #define CONFIG_HPS_USB1 (1)
14 #define CONFIG_HPS_NAND (0)
15 #define CONFIG_HPS_SDMMC (1)
16 #define CONFIG_HPS_QSPI (1)
17 #define CONFIG_HPS_UART0 (1)
18 #define CONFIG_HPS_UART1 (0)
19 #define CONFIG_HPS_TRACE (1)
20 #define CONFIG_HPS_I2C0 (1)
21 #define CONFIG_HPS_I2C1 (0)
22 #define CONFIG_HPS_I2C2 (0)
23 #define CONFIG_HPS_I2C3 (0)
24 #define CONFIG_HPS_SPIM0 (1)
25 #define CONFIG_HPS_SPIM1 (0)
26 #define CONFIG_HPS_SPIS0 (0)
27 #define CONFIG_HPS_SPIS1 (0)
28 #define CONFIG_HPS_CAN0 (1)
29 #define CONFIG_HPS_CAN1 (0)
31 /* IP attribute value (which affected by pin muxing configuration) */
32 #define CONFIG_HPS_SDMMC_BUSWIDTH (4)
34 /* 1 if the pins are connected out */
35 #define CONFIG_HPS_QSPI_CS0 (1)
36 #define CONFIG_HPS_QSPI_CS1 (0)
37 #define CONFIG_HPS_QSPI_CS2 (0)
38 #define CONFIG_HPS_QSPI_CS3 (0)
41 /* 1 means the pin is mux out or available */
42 #define CONFIG_HPS_UART0_TX (1)
43 #define CONFIG_HPS_UART0_RX (1)
44 #define CONFIG_HPS_UART0_CTS (0)
45 #define CONFIG_HPS_UART0_RTS (0)
46 #define CONFIG_HPS_UART1_TX (0)
47 #define CONFIG_HPS_UART1_RX (0)
48 #define CONFIG_HPS_UART1_CTS (0)
49 #define CONFIG_HPS_UART1_RTS (0)
52 #define CONFIG_HPS_PINMUX_NUM (207)
54 #endif /* _PRELOADER_PINMUX_CONFIG_H_ */