3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
6 * Add support for Am29F016D and dynamic switch setting.
8 * SPDX-License-Identifier: GPL-2.0+
13 * Wait for completion of each sector erase command issued
15 * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
19 #include <asm/ppc4xx.h>
20 #include <asm/processor.h>
25 #define DEBUGF(x...) printf(x)
30 #define BOOT_SMALL_FLASH 32 /* 00100000 */
31 #define FLASH_ONBD_N 2 /* 00000010 */
32 #define FLASH_SRAM_SEL 1 /* 00000001 */
34 #define BOOT_SMALL_FLASH_VAL 4
35 #define FLASH_ONBD_N_VAL 2
36 #define FLASH_SRAM_SEL_VAL 1
38 static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
39 {0xffc00000, 0xffe00000, 0xff880000}, /* 0:000: configuraton 3 */
40 {0xffc00000, 0xffe00000, 0xff800000}, /* 1:001: configuraton 4 */
41 {0xffc00000, 0xffe00000, 0x00000000}, /* 2:010: configuraton 7 */
42 {0xffc00000, 0xffe00000, 0x00000000}, /* 3:011: configuraton 8 */
43 {0xff800000, 0xffa00000, 0xfff80000}, /* 4:100: configuraton 1 */
44 {0xff800000, 0xffa00000, 0xfff00000}, /* 5:101: configuraton 2 */
45 {0xffc00000, 0xffe00000, 0x00000000}, /* 6:110: configuraton 5 */
46 {0xffc00000, 0xffe00000, 0x00000000} /* 7:111: configuraton 6 */
50 * include common flash code (for amcc boards)
52 #include "../common/flash.c"
54 /*-----------------------------------------------------------------------
57 static ulong flash_get_size(vu_long * addr, flash_info_t * info);
60 * Override the weak default mapping function with a board specific one
62 u32 flash_get_bank_size(int cs, int idx)
64 u8 reg = in_8((void *)CONFIG_SYS_FPGA_BASE);
66 if ((reg & BOOT_SMALL_FLASH) && !(reg & FLASH_ONBD_N)) {
68 * cs0: small flash (512KiB)
69 * cs2: 2 * big flash (2 * 2MiB)
72 return flash_info[2].size;
74 return flash_info[0].size + flash_info[1].size;
77 * cs0: 2 * big flash (2 * 2MiB)
78 * cs2: small flash (512KiB)
81 return flash_info[0].size + flash_info[1].size;
83 return flash_info[2].size;
89 unsigned long flash_init(void)
91 unsigned long total_b = 0;
92 unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
93 unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE;
94 unsigned char switch_status;
95 unsigned short index = 0;
98 /* read FPGA base register FPGA_REG0 */
99 switch_status = *fpga_base;
101 /* check the bitmap of switch status */
102 if (switch_status & BOOT_SMALL_FLASH) {
103 index += BOOT_SMALL_FLASH_VAL;
105 if (switch_status & FLASH_ONBD_N) {
106 index += FLASH_ONBD_N_VAL;
108 if (switch_status & FLASH_SRAM_SEL) {
109 index += FLASH_SRAM_SEL_VAL;
113 DEBUGF("FLASH: Index: %d\n", index);
115 /* Init: no FLASHes known */
116 for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
117 flash_info[i].flash_id = FLASH_UNKNOWN;
118 flash_info[i].sector_count = -1;
119 flash_info[i].size = 0;
121 /* check whether the address is 0 */
122 if (flash_addr_table[index][i] == 0) {
126 /* call flash_get_size() to initialize sector address */
127 size_b[i] = flash_get_size((vu_long *)
128 flash_addr_table[index][i],
130 flash_info[i].size = size_b[i];
131 if (flash_info[i].flash_id == FLASH_UNKNOWN) {
132 printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
133 i, size_b[i], size_b[i] << 20);
134 flash_info[i].sector_count = -1;
135 flash_info[i].size = 0;
138 /* Monitor protection ON by default */
139 (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
140 CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
142 #ifdef CONFIG_ENV_IS_IN_FLASH
143 (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
144 CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
146 (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
147 CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
151 total_b += flash_info[i].size;