3 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
4 * Marius Groeger <mgroeger@sysgo.de>
6 * See file CREDITS for list of people who contributed to this
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26 #include <asm/arch/AT91RM9200.h>
28 /* ------------------------------------------------------------------------- */
30 * Miscelaneous platform dependent initialisations
35 DECLARE_GLOBAL_DATA_PTR;
40 /* Correct IRDA resistor problem */
41 /* Set PA23_TXD in Output */
42 (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2;
44 /* memory and cpu-speed are setup before relocation */
45 /* so we do _nothing_ here */
47 /* arch number of AT91RM9200DK-Board */
48 gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200;
49 /* adress of boot parameters */
50 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
57 DECLARE_GLOBAL_DATA_PTR;
59 gd->bd->bi_dram[0].start = PHYS_SDRAM;
60 gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
65 * Disk On Chip (NAND) Millenium initialization.
66 * The NAND lives in the CS2* space
68 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
69 extern ulong nand_probe (ulong physadr);
71 #define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
74 /* Setup Smart Media, fitst enable the address range of CS3 */
75 *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
76 /* set the bus interface characteristics based on
77 tDS Data Set up Time 30 - ns
78 tDH Data Hold Time 20 - ns
79 tALS ALE Set up Time 20 - ns
80 16ns at 60 MHz ~= 3 */
81 /*memory mapping structures */
82 #define SM_ID_RWH (5 << 28)
83 #define SM_RWH (1 << 28)
84 #define SM_RWS (0 << 24)
85 #define SM_TDF (1 << 8)
87 AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
88 AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
89 SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
91 /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
92 *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
94 *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
97 /* Configure PC2 as input (signal READY of the SmartMedia) */
98 *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */
99 *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */
101 /* Configure PB1 as input (signal Card Detect of the SmartMedia) */
102 *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */
103 *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */
105 /* PIOB and PIOC clock enabling */
106 *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
107 *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
109 if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
110 printf (" No SmartMedia card inserted\n");
112 printf (" SmartMedia card inserted\n");
114 printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE);
116 printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);