git.sur5r.net Git - u-boot/blob - board/atmel/at91cap9adk/at91cap9adk.c

   1 /*
   2  * (C) Copyright 2007-2008
   3  * Stelian Pop <stelian.pop@leadtechdesign.com>
   4  * Lead Tech Design <www.leadtechdesign.com>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 #include <common.h>
  26 #include <asm/arch/at91cap9.h>
  27 #include <asm/arch/at91cap9_matrix.h>
  28 #include <asm/arch/at91sam9_smc.h>
  29 #include <asm/arch/at91_common.h>
  30 #include <asm/arch/at91_pmc.h>
  31 #include <asm/arch/at91_rstc.h>
  32 #include <asm/arch/gpio.h>
  33 #include <asm/arch/io.h>
  34 #include <asm/arch/hardware.h>
  35 #include <lcd.h>
  36 #include <atmel_lcdc.h>
  37 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
  38 #include <net.h>
  39 #endif
  40 #include <netdev.h>
  41
  42 #define MP_BLOCK_3_BASE 0xFDF00000
  43
  44 DECLARE_GLOBAL_DATA_PTR;
  45
  46 /* ------------------------------------------------------------------------- */
  47 /*
  48  * Miscelaneous platform dependent initialisations
  49  */
  50
  51 static void at91cap9_slowclock_hw_init(void)
  52 {
  53         /*
  54          * On AT91CAP9 revC CPUs, the slow clock can be based on an
  55          * internal impreciseRC oscillator or an external 32kHz oscillator.
  56          * Switch to the latter.
  57          */
  58 #define ARCH_ID_AT91CAP9_REVB   0x399
  59 #define ARCH_ID_AT91CAP9_REVC   0x601
  60         if (at91_sys_read(AT91_PMC_VER) == ARCH_ID_AT91CAP9_REVC) {
  61                 unsigned i, tmp = at91_sys_read(AT91_SCKCR);
  62                 if ((tmp & AT91CAP9_SCKCR_OSCSEL) == AT91CAP9_SCKCR_OSCSEL_RC) {
  63                         extern void timer_init(void);
  64                         timer_init();
  65                         tmp |= AT91CAP9_SCKCR_OSC32EN;
  66                         at91_sys_write(AT91_SCKCR, tmp);
  67                         for (i = 0; i < 1200; i++)
  68                                 udelay(1000);
  69                         tmp |= AT91CAP9_SCKCR_OSCSEL_32;
  70                         at91_sys_write(AT91_SCKCR, tmp);
  71                         udelay(200);
  72                         tmp &= ~AT91CAP9_SCKCR_RCEN;
  73                         at91_sys_write(AT91_SCKCR, tmp);
  74                 }
  75         }
  76 }
  77
  78 static void at91cap9_nor_hw_init(void)
  79 {
  80         unsigned long csa;
  81
  82         /* Ensure EBI supply is 3.3V */
  83         csa = at91_sys_read(AT91_MATRIX_EBICSA);
  84         at91_sys_write(AT91_MATRIX_EBICSA,
  85                        csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
  86         /* Configure SMC CS0 for parallel flash */
  87         at91_sys_write(AT91_SMC_SETUP(0),
  88                        AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) |
  89                        AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
  90         at91_sys_write(AT91_SMC_PULSE(0),
  91                        AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) |
  92                        AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
  93         at91_sys_write(AT91_SMC_CYCLE(0),
  94                        AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
  95         at91_sys_write(AT91_SMC_MODE(0),
  96                        AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
  97                        AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE |
  98                        AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
  99 }
 100
 101 #ifdef CONFIG_CMD_NAND
 102 static void at91cap9_nand_hw_init(void)
 103 {
 104         unsigned long csa;
 105
 106         /* Enable CS3 */
 107         csa = at91_sys_read(AT91_MATRIX_EBICSA);
 108         at91_sys_write(AT91_MATRIX_EBICSA,
 109                        csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA |
 110                        AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 111
 112         /* Configure SMC CS3 for NAND/SmartMedia */
 113         at91_sys_write(AT91_SMC_SETUP(3),
 114                        AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) |
 115                        AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
 116         at91_sys_write(AT91_SMC_PULSE(3),
 117                        AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) |
 118                        AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
 119         at91_sys_write(AT91_SMC_CYCLE(3),
 120                        AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
 121         at91_sys_write(AT91_SMC_MODE(3),
 122                        AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 123                        AT91_SMC_EXNWMODE_DISABLE |
 124 #ifdef CONFIG_SYS_NAND_DBW_16
 125                        AT91_SMC_DBW_16 |
 126 #else /* CONFIG_SYS_NAND_DBW_8 */
 127                        AT91_SMC_DBW_8 |
 128 #endif
 129                        AT91_SMC_TDF_(1));
 130
 131         at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
 132
 133         /* RDY/BSY is not connected */
 134
 135         /* Enable NandFlash */
 136         at91_set_gpio_output(AT91_PIN_PD15, 1);
 137 }
 138 #endif
 139
 140 #ifdef CONFIG_MACB
 141 static void at91cap9_macb_hw_init(void)
 142 {
 143         /* Enable clock */
 144         at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC);
 145
 146         /*
 147          * Disable pull-up on:
 148          *      RXDV (PB22) => PHY normal mode (not Test mode)
 149          *      ERX0 (PB25) => PHY ADDR0
 150          *      ERX1 (PB26) => PHY ADDR1 => PHYADDR = 0x0
 151          *
 152          * PHY has internal pull-down
 153          */
 154         writel(pin_to_mask(AT91_PIN_PB22) |
 155                pin_to_mask(AT91_PIN_PB25) |
 156                pin_to_mask(AT91_PIN_PB26),
 157                pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
 158
 159         /* Need to reset PHY -> 500ms reset */
 160         at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
 161                                      (AT91_RSTC_ERSTL & (0x0D << 8)) |
 162                                      AT91_RSTC_URSTEN);
 163
 164         at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
 165
 166         /* Wait for end hardware reset */
 167         while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
 168
 169         /* Restore NRST value */
 170         at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
 171                                      (AT91_RSTC_ERSTL & (0x0 << 8)) |
 172                                      AT91_RSTC_URSTEN);
 173
 174         /* Re-enable pull-up */
 175         writel(pin_to_mask(AT91_PIN_PB22) |
 176                pin_to_mask(AT91_PIN_PB25) |
 177                pin_to_mask(AT91_PIN_PB26),
 178                pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
 179
 180         at91_set_A_periph(AT91_PIN_PB21, 0);    /* ETXCK_EREFCK */
 181         at91_set_A_periph(AT91_PIN_PB22, 0);    /* ERXDV */
 182         at91_set_A_periph(AT91_PIN_PB25, 0);    /* ERX0 */
 183         at91_set_A_periph(AT91_PIN_PB26, 0);    /* ERX1 */
 184         at91_set_A_periph(AT91_PIN_PB27, 0);    /* ERXER */
 185         at91_set_A_periph(AT91_PIN_PB28, 0);    /* ETXEN */
 186         at91_set_A_periph(AT91_PIN_PB23, 0);    /* ETX0 */
 187         at91_set_A_periph(AT91_PIN_PB24, 0);    /* ETX1 */
 188         at91_set_A_periph(AT91_PIN_PB30, 0);    /* EMDIO */
 189         at91_set_A_periph(AT91_PIN_PB29, 0);    /* EMDC */
 190
 191 #ifndef CONFIG_RMII
 192         at91_set_B_periph(AT91_PIN_PC25, 0);    /* ECRS */
 193         at91_set_B_periph(AT91_PIN_PC26, 0);    /* ECOL */
 194         at91_set_B_periph(AT91_PIN_PC22, 0);    /* ERX2 */
 195         at91_set_B_periph(AT91_PIN_PC23, 0);    /* ERX3 */
 196         at91_set_B_periph(AT91_PIN_PC27, 0);    /* ERXCK */
 197         at91_set_B_periph(AT91_PIN_PC20, 0);    /* ETX2 */
 198         at91_set_B_periph(AT91_PIN_PC21, 0);    /* ETX3 */
 199         at91_set_B_periph(AT91_PIN_PC24, 0);    /* ETXER */
 200 #endif
 201         /* Unlock EMAC, 3 0 2 1 sequence */
 202 #define MP_MAC_KEY0     0x5969cb2a
 203 #define MP_MAC_KEY1     0xb4a1872e
 204 #define MP_MAC_KEY2     0x05683fbc
 205 #define MP_MAC_KEY3     0x3634fba4
 206 #define UNLOCK_MAC      0x00000008
 207         writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c);
 208         writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30);
 209         writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38);
 210         writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34);
 211         writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40);
 212 }
 213 #endif
 214
 215 #ifdef CONFIG_USB_OHCI_NEW
 216 static void at91cap9_uhp_hw_init(void)
 217 {
 218         /* Unlock USB OHCI, 3 2 0 1 sequence */
 219 #define MP_OHCI_KEY0    0x896c11ca
 220 #define MP_OHCI_KEY1    0x68ebca21
 221 #define MP_OHCI_KEY2    0x4823efbc
 222 #define MP_OHCI_KEY3    0x8651aae4
 223 #define UNLOCK_OHCI     0x00000010
 224         writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c);
 225         writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38);
 226         writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30);
 227         writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34);
 228         writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40);
 229 }
 230 #endif
 231
 232 #ifdef CONFIG_LCD
 233 vidinfo_t panel_info = {
 234         vl_col:         240,
 235         vl_row:         320,
 236         vl_clk:         4965000,
 237         vl_sync:        ATMEL_LCDC_INVLINE_INVERTED |
 238                         ATMEL_LCDC_INVFRAME_INVERTED,
 239         vl_bpix:        3,
 240         vl_tft:         1,
 241         vl_hsync_len:   5,
 242         vl_left_margin: 1,
 243         vl_right_margin:33,
 244         vl_vsync_len:   1,
 245         vl_upper_margin:1,
 246         vl_lower_margin:0,
 247         mmio:           AT91CAP9_LCDC_BASE,
 248 };
 249
 250 void lcd_enable(void)
 251 {
 252         at91_set_gpio_value(AT91_PIN_PC0, 0);  /* power up */
 253 }
 254
 255 void lcd_disable(void)
 256 {
 257         at91_set_gpio_value(AT91_PIN_PC0, 1);  /* power down */
 258 }
 259
 260 static void at91cap9_lcd_hw_init(void)
 261 {
 262         at91_set_A_periph(AT91_PIN_PC1, 0);     /* LCDHSYNC */
 263         at91_set_A_periph(AT91_PIN_PC2, 0);     /* LCDDOTCK */
 264         at91_set_A_periph(AT91_PIN_PC3, 0);     /* LCDDEN */
 265         at91_set_B_periph(AT91_PIN_PB9, 0);     /* LCDCC */
 266         at91_set_A_periph(AT91_PIN_PC6, 0);     /* LCDD2 */
 267         at91_set_A_periph(AT91_PIN_PC7, 0);     /* LCDD3 */
 268         at91_set_A_periph(AT91_PIN_PC8, 0);     /* LCDD4 */
 269         at91_set_A_periph(AT91_PIN_PC9, 0);     /* LCDD5 */
 270         at91_set_A_periph(AT91_PIN_PC10, 0);    /* LCDD6 */
 271         at91_set_A_periph(AT91_PIN_PC11, 0);    /* LCDD7 */
 272         at91_set_A_periph(AT91_PIN_PC14, 0);    /* LCDD10 */
 273         at91_set_A_periph(AT91_PIN_PC15, 0);    /* LCDD11 */
 274         at91_set_A_periph(AT91_PIN_PC16, 0);    /* LCDD12 */
 275         at91_set_A_periph(AT91_PIN_PC17, 0);    /* LCDD13 */
 276         at91_set_A_periph(AT91_PIN_PC18, 0);    /* LCDD14 */
 277         at91_set_A_periph(AT91_PIN_PC19, 0);    /* LCDD15 */
 278         at91_set_A_periph(AT91_PIN_PC22, 0);    /* LCDD18 */
 279         at91_set_A_periph(AT91_PIN_PC23, 0);    /* LCDD19 */
 280         at91_set_A_periph(AT91_PIN_PC24, 0);    /* LCDD20 */
 281         at91_set_A_periph(AT91_PIN_PC25, 0);    /* LCDD21 */
 282         at91_set_A_periph(AT91_PIN_PC26, 0);    /* LCDD22 */
 283         at91_set_A_periph(AT91_PIN_PC27, 0);    /* LCDD23 */
 284
 285         at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_LCDC);
 286
 287         gd->fb_base = 0;
 288 }
 289
 290 #ifdef CONFIG_LCD_INFO
 291 #include <nand.h>
 292 #include <version.h>
 293
 294 void lcd_show_board_info(void)
 295 {
 296         ulong dram_size, nand_size;
 297         int i;
 298         char temp[32];
 299
 300         lcd_printf ("%s\n", U_BOOT_VERSION);
 301         lcd_printf ("(C) 2008 ATMEL Corp\n");
 302         lcd_printf ("at91support@atmel.com\n");
 303         lcd_printf ("%s CPU at %s MHz\n",
 304                 AT91_CPU_NAME,
 305                 strmhz(temp, AT91_CPU_CLOCK));
 306
 307         dram_size = 0;
 308         for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
 309                 dram_size += gd->bd->bi_dram[i].size;
 310         nand_size = 0;
 311         for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
 312                 nand_size += nand_info[i].size;
 313         lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
 314                 dram_size >> 20,
 315                 nand_size >> 20 );
 316 }
 317 #endif /* CONFIG_LCD_INFO */
 318 #endif
 319
 320 int board_init(void)
 321 {
 322         /* Enable Ctrlc */
 323         console_init_f();
 324
 325         /* arch number of AT91CAP9ADK-Board */
 326         gd->bd->bi_arch_number = MACH_TYPE_AT91CAP9ADK;
 327         /* adress of boot parameters */
 328         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 329
 330         at91_serial_hw_init();
 331         at91cap9_slowclock_hw_init();
 332         at91cap9_nor_hw_init();
 333 #ifdef CONFIG_CMD_NAND
 334         at91cap9_nand_hw_init();
 335 #endif
 336 #ifdef CONFIG_HAS_DATAFLASH
 337         at91_spi0_hw_init(1 << 0);
 338 #endif
 339 #ifdef CONFIG_MACB
 340         at91cap9_macb_hw_init();
 341 #endif
 342 #ifdef CONFIG_USB_OHCI_NEW
 343         at91cap9_uhp_hw_init();
 344 #endif
 345 #ifdef CONFIG_LCD
 346         at91cap9_lcd_hw_init();
 347 #endif
 348         return 0;
 349 }
 350
 351 int dram_init(void)
 352 {
 353         gd->bd->bi_dram[0].start = PHYS_SDRAM;
 354         gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
 355         return 0;
 356 }
 357
 358 #ifdef CONFIG_RESET_PHY_R
 359 void reset_phy(void)
 360 {
 361 #ifdef CONFIG_MACB
 362         /*
 363          * Initialize ethernet HW addr prior to starting Linux,
 364          * needed for nfsroot
 365          */
 366         eth_init(gd->bd);
 367 #endif
 368 }
 369 #endif
 370
 371 int board_eth_init(bd_t *bis)
 372 {
 373         int rc = 0;
 374 #ifdef CONFIG_MACB
 375         rc = macb_eth_initialize(0, (void *)AT91CAP9_BASE_EMAC, 0x00);
 376 #endif
 377         return rc;
 378 }