2 * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
4 * Base on code from TI. Original Notices follow:
6 * (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/
8 * Modified for DA8xx EVM.
10 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
12 * Parts are shamelessly stolen from various TI sources, original copyright
14 * -----------------------------------------------------------------
16 * Copyright (C) 2004 Texas Instruments.
18 * ----------------------------------------------------------------------------
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * This program is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
32 * ----------------------------------------------------------------------------
37 #include <asm/arch/hardware.h>
39 #include "../common/misc.h"
41 DECLARE_GLOBAL_DATA_PTR;
43 #define pinmux &davinci_syscfg_regs->pinmux
45 /* SPI0 pin muxer settings */
46 static const struct pinmux_config spi0_pins[] = {
54 /* UART pin muxer settings */
55 static const struct pinmux_config uart_pins[] = {
60 /* I2C pin muxer settings */
61 static const struct pinmux_config i2c_pins[] = {
66 /* USB0_DRVVBUS pin muxer settings */
67 static const struct pinmux_config usb_pins[] = {
71 static const struct pinmux_resource pinmuxes[] = {
72 #ifdef CONFIG_SPI_FLASH
73 PINMUX_ITEM(spi0_pins),
75 PINMUX_ITEM(uart_pins),
76 PINMUX_ITEM(i2c_pins),
77 #ifdef CONFIG_USB_DA8XX
78 PINMUX_ITEM(usb_pins),
84 #ifndef CONFIG_USE_IRQ
86 * Mask all IRQs by clearing the global enable and setting
87 * the enable clear for all the 90 interrupts.
90 writel(0, &davinci_aintc_regs->ger);
92 writel(0, &davinci_aintc_regs->hier);
94 writel(0xffffffff, &davinci_aintc_regs->ecr1);
95 writel(0xffffffff, &davinci_aintc_regs->ecr2);
96 writel(0xffffffff, &davinci_aintc_regs->ecr3);
99 /* arch number of the board */
100 gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM;
102 /* address of boot parameters */
103 gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
106 * Power on required peripherals
107 * ARM does not have access by default to PSC0 and PSC1
108 * assuming here that the DSP bootloader has set the IOPU
109 * such that PSC access is available to ARM
111 lpsc_on(DAVINCI_LPSC_AEMIF); /* NAND, NOR */
112 lpsc_on(DAVINCI_LPSC_SPI0); /* Serial Flash */
113 lpsc_on(DAVINCI_LPSC_EMAC); /* image download */
114 lpsc_on(DAVINCI_LPSC_UART2); /* console */
115 lpsc_on(DAVINCI_LPSC_GPIO);
117 /* setup the SUSPSRC for ARM to control emulation suspend */
118 writel(readl(&davinci_syscfg_regs->suspsrc) &
119 ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
120 DAVINCI_SYSCFG_SUSPSRC_SPI0 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
121 DAVINCI_SYSCFG_SUSPSRC_UART2),
122 &davinci_syscfg_regs->suspsrc);
124 /* configure pinmux settings */
125 if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
128 /* enable the console UART */
129 writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
130 DAVINCI_UART_PWREMU_MGMT_UTRST),
131 &davinci_uart2_ctrl_regs->pwremu_mgmt);