git.sur5r.net Git - u-boot/blob - board/engicam/geam6ul/geam6ul.c

   1 /*
   2  * Copyright (C) 2016 Amarula Solutions B.V.
   3  * Copyright (C) 2016 Engicam S.r.l.
   4  * Author: Jagan Teki <jagan@amarulasolutions.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <mmc.h>
  11
  12 #include <asm/io.h>
  13 #include <asm/gpio.h>
  14 #include <linux/sizes.h>
  15
  16 #include <asm/arch/clock.h>
  17 #include <asm/arch/crm_regs.h>
  18 #include <asm/arch/iomux.h>
  19 #include <asm/arch/mx6-pins.h>
  20 #include <asm/arch/sys_proto.h>
  21 #include <asm/imx-common/iomux-v3.h>
  22
  23 DECLARE_GLOBAL_DATA_PTR;
  24
  25 #define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |             \
  26         PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
  27         PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  28
  29 static iomux_v3_cfg_t const uart1_pads[] = {
  30         MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
  31         MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
  32 };
  33
  34 int board_early_init_f(void)
  35 {
  36         imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
  37
  38         return 0;
  39 }
  40
  41 #ifdef CONFIG_NAND_MXS
  42
  43 #define GPMI_PAD_CTRL0          (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
  44 #define GPMI_PAD_CTRL1          (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
  45                                 PAD_CTL_SRE_FAST)
  46 #define GPMI_PAD_CTRL2          (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
  47
  48 static iomux_v3_cfg_t const nand_pads[] = {
  49         MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  50         MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  51         MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  52         MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  53         MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  54         MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  55         MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  56         MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  57         MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  58         MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  59         MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  60         MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  61         MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  62         MX6_PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  63         MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
  64 };
  65
  66 static void setup_gpmi_nand(void)
  67 {
  68         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
  69
  70         /* config gpmi nand iomux */
  71         imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
  72
  73         clrbits_le32(&mxc_ccm->CCGR4,
  74                      MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
  75                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
  76                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
  77                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
  78                      MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
  79
  80         /*
  81          * config gpmi and bch clock to 100 MHz
  82          * bch/gpmi select PLL2 PFD2 400M
  83          * 100M = 400M / 4
  84          */
  85         clrbits_le32(&mxc_ccm->cscmr1,
  86                      MXC_CCM_CSCMR1_BCH_CLK_SEL |
  87                      MXC_CCM_CSCMR1_GPMI_CLK_SEL);
  88         clrsetbits_le32(&mxc_ccm->cscdr1,
  89                         MXC_CCM_CSCDR1_BCH_PODF_MASK |
  90                         MXC_CCM_CSCDR1_GPMI_PODF_MASK,
  91                         (3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
  92                         (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
  93
  94         /* enable gpmi and bch clock gating */
  95         setbits_le32(&mxc_ccm->CCGR4,
  96                      MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
  97                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
  98                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
  99                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
 100                      MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
 101
 102         /* enable apbh clock gating */
 103         setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
 104 }
 105 #endif /* CONFIG_NAND_MXS */
 106
 107 #ifdef CONFIG_ENV_IS_IN_MMC
 108 static void mmc_late_init(void)
 109 {
 110         char cmd[32];
 111         char mmcblk[32];
 112         u32 dev_no = mmc_get_env_dev();
 113
 114         setenv_ulong("mmcdev", dev_no);
 115
 116         /* Set mmcblk env */
 117         sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
 118         setenv("mmcroot", mmcblk);
 119
 120         sprintf(cmd, "mmc dev %d", dev_no);
 121         run_command(cmd, 0);
 122 }
 123 #endif
 124
 125 int board_late_init(void)
 126 {
 127         switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
 128                         IMX6_BMODE_SHIFT) {
 129         case IMX6_BMODE_SD:
 130         case IMX6_BMODE_ESD:
 131 #ifdef CONFIG_ENV_IS_IN_MMC
 132                 mmc_late_init();
 133 #endif
 134                 setenv("modeboot", "mmcboot");
 135                 break;
 136         case IMX6_BMODE_NAND:
 137                 setenv("modeboot", "nandboot");
 138                 break;
 139         default:
 140                 setenv("modeboot", "");
 141                 break;
 142         }
 143
 144         return 0;
 145 }
 146
 147 int board_init(void)
 148 {
 149         /* Address of boot parameters */
 150         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 151
 152 #ifdef CONFIG_NAND_MXS
 153         setup_gpmi_nand();
 154 #endif
 155
 156         return 0;
 157 }
 158
 159 int dram_init(void)
 160 {
 161         gd->ram_size = imx_ddr_size();
 162
 163         return 0;
 164 }
 165
 166 #ifdef CONFIG_SPL_BUILD
 167 #include <libfdt.h>
 168 #include <spl.h>
 169
 170 #include <asm/arch/crm_regs.h>
 171 #include <asm/arch/mx6-ddr.h>
 172
 173 /* MMC board initialization is needed till adding DM support in SPL */
 174 #if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
 175 #include <mmc.h>
 176 #include <fsl_esdhc.h>
 177
 178 #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |             \
 179         PAD_CTL_PUS_22K_UP  | PAD_CTL_SPEED_LOW |               \
 180         PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 181
 182 static iomux_v3_cfg_t const usdhc1_pads[] = {
 183         MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 184         MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 185         MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 186         MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 187         MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 188         MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 189
 190         /* VSELECT */
 191         MX6_PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 192         /* CD */
 193         MX6_PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
 194         /* RST_B */
 195         MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
 196 };
 197
 198 #define USDHC1_CD_GPIO  IMX_GPIO_NR(1, 1)
 199
 200 struct fsl_esdhc_cfg usdhc_cfg[1] = {
 201         {USDHC1_BASE_ADDR, 0, 4},
 202 };
 203
 204 int board_mmc_getcd(struct mmc *mmc)
 205 {
 206         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 207         int ret = 0;
 208
 209         switch (cfg->esdhc_base) {
 210         case USDHC1_BASE_ADDR:
 211                 ret = !gpio_get_value(USDHC1_CD_GPIO);
 212                 break;
 213         }
 214
 215         return ret;
 216 }
 217
 218 int board_mmc_init(bd_t *bis)
 219 {
 220         int i, ret;
 221
 222         /*
 223         * According to the board_mmc_init() the following map is done:
 224         * (U-boot device node)    (Physical Port)
 225         * mmc0                          USDHC1
 226         */
 227         for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
 228                 switch (i) {
 229                 case 0:
 230                         imx_iomux_v3_setup_multiple_pads(
 231                                 usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
 232                         gpio_direction_input(USDHC1_CD_GPIO);
 233                         usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 234                         break;
 235                 default:
 236                         printf("Warning - USDHC%d controller not supporting\n",
 237                                i + 1);
 238                         return 0;
 239                 }
 240
 241                 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
 242                 if (ret) {
 243                         printf("Warning: failed to initialize mmc dev %d\n", i);
 244                         return ret;
 245                 }
 246         }
 247
 248         return 0;
 249 }
 250 #endif /* CONFIG_FSL_ESDHC */
 251
 252 static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
 253         .grp_addds = 0x00000030,
 254         .grp_ddrmode_ctl = 0x00020000,
 255         .grp_b0ds = 0x00000030,
 256         .grp_ctlds = 0x00000030,
 257         .grp_b1ds = 0x00000030,
 258         .grp_ddrpke = 0x00000000,
 259         .grp_ddrmode = 0x00020000,
 260         .grp_ddr_type = 0x000c0000,
 261 };
 262
 263 static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
 264         .dram_dqm0 = 0x00000030,
 265         .dram_dqm1 = 0x00000030,
 266         .dram_ras = 0x00000030,
 267         .dram_cas = 0x00000030,
 268         .dram_odt0 = 0x00000030,
 269         .dram_odt1 = 0x00000030,
 270         .dram_sdba2 = 0x00000000,
 271         .dram_sdclk_0 = 0x00000008,
 272         .dram_sdqs0 = 0x00000038,
 273         .dram_sdqs1 = 0x00000030,
 274         .dram_reset = 0x00000030,
 275 };
 276
 277 static struct mx6_mmdc_calibration mx6_mmcd_calib = {
 278         .p0_mpwldectrl0 = 0x00070007,
 279         .p0_mpdgctrl0 = 0x41490145,
 280         .p0_mprddlctl = 0x40404546,
 281         .p0_mpwrdlctl = 0x4040524D,
 282 };
 283
 284 struct mx6_ddr_sysinfo ddr_sysinfo = {
 285         .dsize = 0,
 286         .cs_density = 20,
 287         .ncs = 1,
 288         .cs1_mirror = 0,
 289         .rtt_wr = 2,
 290         .rtt_nom = 1,           /* RTT_Nom = RZQ/2 */
 291         .walat = 1,             /* Write additional latency */
 292         .ralat = 5,             /* Read additional latency */
 293         .mif3_mode = 3,         /* Command prediction working mode */
 294         .bi_on = 1,             /* Bank interleaving enabled */
 295         .sde_to_rst = 0x10,     /* 14 cycles, 200us (JEDEC default) */
 296         .rst_to_cke = 0x23,     /* 33 cycles, 500us (JEDEC default) */
 297         .ddr_type = DDR_TYPE_DDR3,
 298 };
 299
 300 static struct mx6_ddr3_cfg mem_ddr = {
 301         .mem_speed = 800,
 302         .density = 4,
 303         .width = 16,
 304         .banks = 8,
 305         .rowaddr = 13,
 306         .coladdr = 10,
 307         .pagesz = 2,
 308         .trcd = 1375,
 309         .trcmin = 4875,
 310         .trasmin = 3500,
 311 };
 312
 313 static void ccgr_init(void)
 314 {
 315         struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 316
 317         writel(0xFFFFFFFF, &ccm->CCGR0);
 318         writel(0xFFFFFFFF, &ccm->CCGR1);
 319         writel(0xFFFFFFFF, &ccm->CCGR2);
 320         writel(0xFFFFFFFF, &ccm->CCGR3);
 321         writel(0xFFFFFFFF, &ccm->CCGR4);
 322         writel(0xFFFFFFFF, &ccm->CCGR5);
 323         writel(0xFFFFFFFF, &ccm->CCGR6);
 324         writel(0xFFFFFFFF, &ccm->CCGR7);
 325 }
 326
 327 static void spl_dram_init(void)
 328 {
 329         mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
 330         mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
 331 }
 332
 333 void board_init_f(ulong dummy)
 334 {
 335         /* setup AIPS and disable watchdog */
 336         arch_cpu_init();
 337
 338         ccgr_init();
 339
 340         /* iomux and setup of i2c */
 341         board_early_init_f();
 342
 343         /* setup GP timer */
 344         timer_init();
 345
 346         /* UART clocks enabled and gd valid - init serial console */
 347         preloader_console_init();
 348
 349         /* DDR initialization */
 350         spl_dram_init();
 351
 352         /* Clear the BSS. */
 353         memset(__bss_start, 0, __bss_end - __bss_start);
 354
 355         /* load/boot image from boot device */
 356         board_init_r(NULL, 0);
 357 }
 358 #endif /* CONFIG_SPL_BUILD */