2 * Copyright 2009-2011 Freescale Semiconductor, Inc.
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26 #include <linux/compiler.h>
28 #include <asm/processor.h>
29 #include <asm/cache.h>
30 #include <asm/immap_85xx.h>
31 #include <asm/fsl_law.h>
32 #include <asm/fsl_serdes.h>
33 #include <asm/fsl_portals.h>
34 #include <asm/fsl_liodn.h>
37 extern void pci_of_setup(void *blob, bd_t *bd);
39 #include "../common/ngpixis.h"
40 #include "corenet_ds.h"
42 DECLARE_GLOBAL_DATA_PTR;
47 struct cpu_type *cpu = gd->cpu;
48 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
51 printf("Board: %sDS, ", cpu->name);
52 printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
53 in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
55 sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
56 sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT;
59 printf("vBank: %d\n", sw);
65 printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
67 #ifdef CONFIG_PHYS_64BIT
68 puts("36-bit Addressing\n");
71 /* Display the RCW, so that no one gets confused as to what RCW
72 * we're actually using for this boot.
74 puts("Reset Configuration Word (RCW):");
75 for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
76 u32 rcw = in_be32(&gur->rcwsr[i]);
79 printf("\n %08x:", i * 4);
84 /* Display the actual SERDES reference clocks as configured by the
85 * dip switches on the board. Note that the SWx registers could
86 * technically be set to force the reference clocks to match the
87 * values that the SERDES expects (or vice versa). For now, however,
88 * we just display both values and hope the user notices when they
91 puts("SERDES Reference Clocks: ");
92 #if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
93 sw = in_8(&PIXIS_SW(5));
94 for (i = 0; i < 3; i++) {
95 static const char *freq[] = {"100", "125", "156.25", "212.5" };
96 unsigned int clock = (sw >> (6 - (2 * i))) & 3;
98 printf("Bank%u=%sMhz ", i+1, freq[clock]);
102 sw = in_8(&PIXIS_SW(3));
103 printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100);
104 printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125");
105 printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125");
111 int board_early_init_f(void)
113 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
116 * P4080 DS board only uses the DDR1_MCK0/3 and DDR2_MCK0/3
117 * disable the DDR1_MCK1/2/4/5 and DDR2_MCK1/2/4/5 to reduce
118 * the noise introduced by these unterminated and unused clock pairs.
120 setbits_be32(&gur->ddrclkdr, 0x001B001B);
125 int board_early_init_r(void)
127 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
128 const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
131 * Remap Boot flash + PROMJET region to caching-inhibited
132 * so that flash can be erased properly.
135 /* Flush d-cache and invalidate i-cache of any FLASH data */
139 /* invalidate existing TLB entry for flash + promjet */
140 disable_tlb(flash_esel);
142 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
143 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
144 0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
147 #ifdef CONFIG_SYS_DPAA_QBMAN
154 static const char *serdes_clock_to_string(u32 clock)
157 case SRDS_PLLCR0_RFCK_SEL_100:
159 case SRDS_PLLCR0_RFCK_SEL_125:
161 case SRDS_PLLCR0_RFCK_SEL_156_25:
168 #define NUM_SRDS_BANKS 3
170 int misc_init_r(void)
172 serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
173 u32 actual[NUM_SRDS_BANKS];
177 #if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
178 sw = in_8(&PIXIS_SW(5));
179 for (i = 0; i < 3; i++) {
180 unsigned int clock = (sw >> (6 - (2 * i))) & 3;
183 actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
186 actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
189 actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
192 printf("Warning: SDREFCLK%u switch setting of '11' is "
193 "unsupported\n", i + 1);
198 /* Warn if the expected SERDES reference clocks don't match the
199 * actual reference clocks. This needs to be done after calling
200 * p4080_erratum_serdes8(), since that function may modify the clocks.
202 sw = in_8(&PIXIS_SW(3));
203 actual[0] = (sw & 0x40) ?
204 SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100;
205 actual[1] = (sw & 0x20) ?
206 SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
207 actual[2] = (sw & 0x10) ?
208 SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
211 for (i = 0; i < NUM_SRDS_BANKS; i++) {
212 u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
213 if (expected != actual[i]) {
214 printf("Warning: SERDES bank %u expects reference clock"
215 " %sMHz, but actual is %sMHz\n", i + 1,
216 serdes_clock_to_string(expected),
217 serdes_clock_to_string(actual[i]));
224 void ft_board_setup(void *blob, bd_t *bd)
229 ft_cpu_setup(blob, bd);
231 base = getenv_bootm_low();
232 size = getenv_bootm_size();
234 fdt_fixup_memory(blob, (u64)base, (u64)size);
237 pci_of_setup(blob, bd);
240 fdt_fixup_liodn(blob);
241 fdt_fixup_dr_usb(blob, bd);
243 #ifdef CONFIG_SYS_DPAA_FMAN
244 fdt_fixup_fman_ethernet(blob);
245 fdt_fixup_board_enet(blob);