git.sur5r.net Git - u-boot/blob - board/freescale/ls1088a/eth_ls1088aqds.c

   1 /*
   2  * Copyright 2017 NXP
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <netdev.h>
   9 #include <asm/io.h>
  10 #include <asm/arch/fsl_serdes.h>
  11 #include <hwconfig.h>
  12 #include <fsl_mdio.h>
  13 #include <malloc.h>
  14 #include <fm_eth.h>
  15 #include <i2c.h>
  16 #include <miiphy.h>
  17 #include <fsl-mc/fsl_mc.h>
  18 #include <fsl-mc/ldpaa_wriop.h>
  19
  20 #include "../common/qixis.h"
  21
  22 #include "ls1088a_qixis.h"
  23
  24 #ifdef CONFIG_FSL_MC_ENET
  25
  26 #define SFP_TX          0
  27
  28  /* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks.
  29  *   Bank 1 -> Lanes A, B, C, D,
  30  *   Bank 2 -> Lanes A,B, C, D,
  31  */
  32
  33  /* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here
  34   * means that the mapping must be determined dynamically, or that the lane
  35   * maps to something other than a board slot.
  36   */
  37
  38 static u8 lane_to_slot_fsm1[] = {
  39         0, 0, 0, 0, 0, 0, 0, 0
  40 };
  41
  42 /* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
  43  * housed.
  44  */
  45
  46 static int xqsgii_riser_phy_addr[] = {
  47         XQSGMII_CARD_PHY1_PORT0_ADDR,
  48         XQSGMII_CARD_PHY2_PORT0_ADDR,
  49         XQSGMII_CARD_PHY3_PORT0_ADDR,
  50         XQSGMII_CARD_PHY4_PORT0_ADDR,
  51         XQSGMII_CARD_PHY3_PORT2_ADDR,
  52         XQSGMII_CARD_PHY1_PORT2_ADDR,
  53         XQSGMII_CARD_PHY4_PORT2_ADDR,
  54         XQSGMII_CARD_PHY2_PORT2_ADDR,
  55 };
  56
  57 static int sgmii_riser_phy_addr[] = {
  58         SGMII_CARD_PORT1_PHY_ADDR,
  59         SGMII_CARD_PORT2_PHY_ADDR,
  60         SGMII_CARD_PORT3_PHY_ADDR,
  61         SGMII_CARD_PORT4_PHY_ADDR,
  62 };
  63
  64 /* Slot2 does not have EMI connections */
  65 #define EMI_NONE        0xFF
  66 #define EMI1_RGMII1     0
  67 #define EMI1_RGMII2     1
  68 #define EMI1_SLOT1      2
  69
  70 static const char * const mdio_names[] = {
  71         "LS1088A_QDS_MDIO0",
  72         "LS1088A_QDS_MDIO1",
  73         "LS1088A_QDS_MDIO2",
  74         DEFAULT_WRIOP_MDIO2_NAME,
  75 };
  76
  77 struct ls1088a_qds_mdio {
  78         u8 muxval;
  79         struct mii_dev *realbus;
  80 };
  81
  82 static void sgmii_configure_repeater(int dpmac)
  83 {
  84         struct mii_dev *bus;
  85         uint8_t a = 0xf;
  86         int i, j, ret;
  87         unsigned short value;
  88         const char *dev = "LS1088A_QDS_MDIO2";
  89         int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
  90         int i2c_phy_addr = 0;
  91         int phy_addr = 0;
  92
  93         uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
  94         uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
  95         uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
  96         uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
  97
  98         /* Set I2c to Slot 1 */
  99         i2c_write(0x77, 0, 0, &a, 1);
 100
 101         switch (dpmac) {
 102         case 1:
 103                 i2c_phy_addr = i2c_addr[1];
 104                 phy_addr = 4;
 105                 break;
 106         case 2:
 107                 i2c_phy_addr = i2c_addr[0];
 108                 phy_addr = 0;
 109                 break;
 110         case 3:
 111                 i2c_phy_addr = i2c_addr[3];
 112                 phy_addr = 0xc;
 113                 break;
 114         case 7:
 115                 i2c_phy_addr = i2c_addr[2];
 116                 phy_addr = 8;
 117                 break;
 118         }
 119
 120         /* Check the PHY status */
 121         ret = miiphy_set_current_dev(dev);
 122         if (ret > 0)
 123                 goto error;
 124
 125         bus = mdio_get_current_dev();
 126         debug("Reading from bus %s\n", bus->name);
 127
 128         ret = miiphy_write(dev, phy_addr, 0x1f, 3);
 129         if (ret > 0)
 130                 goto error;
 131
 132         mdelay(10);
 133         ret = miiphy_read(dev, phy_addr, 0x11, &value);
 134         if (ret > 0)
 135                         goto error;
 136
 137         mdelay(10);
 138
 139         if ((value & 0xfff) == 0x401) {
 140                 miiphy_write(dev, phy_addr, 0x1f, 0);
 141                 printf("DPMAC %d:PHY is ..... Configured\n", dpmac);
 142                 return;
 143         }
 144
 145         for (i = 0; i < 4; i++) {
 146                 for (j = 0; j < 4; j++) {
 147                         a = 0x18;
 148                         i2c_write(i2c_phy_addr, 6, 1, &a, 1);
 149                         a = 0x38;
 150                         i2c_write(i2c_phy_addr, 4, 1, &a, 1);
 151                         a = 0x4;
 152                         i2c_write(i2c_phy_addr, 8, 1, &a, 1);
 153
 154                         i2c_write(i2c_phy_addr, 0xf, 1,
 155                                   &ch_a_eq[i], 1);
 156                         i2c_write(i2c_phy_addr, 0x11, 1,
 157                                   &ch_a_ctl2[j], 1);
 158
 159                         i2c_write(i2c_phy_addr, 0x16, 1,
 160                                   &ch_b_eq[i], 1);
 161                         i2c_write(i2c_phy_addr, 0x18, 1,
 162                                   &ch_b_ctl2[j], 1);
 163
 164                         a = 0x14;
 165                         i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
 166                         a = 0xb5;
 167                         i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
 168                         a = 0x20;
 169                         i2c_write(i2c_phy_addr, 4, 1, &a, 1);
 170                         mdelay(100);
 171                         ret = miiphy_read(dev, phy_addr, 0x11, &value);
 172                         if (ret > 0)
 173                                 goto error;
 174
 175                         mdelay(100);
 176                         ret = miiphy_read(dev, phy_addr, 0x11, &value);
 177                         if (ret > 0)
 178                                 goto error;
 179
 180                         if ((value & 0xfff) == 0x401) {
 181                                 printf("DPMAC %d :PHY is configured ",
 182                                        dpmac);
 183                                 printf("after setting repeater 0x%x\n",
 184                                        value);
 185                                 i = 5;
 186                                 j = 5;
 187                         } else {
 188                                 printf("DPMAC %d :PHY is failed to ",
 189                                        dpmac);
 190                                 printf("configure the repeater 0x%x\n", value);
 191                         }
 192                 }
 193         }
 194         miiphy_write(dev, phy_addr, 0x1f, 0);
 195 error:
 196         if (ret)
 197                 printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac);
 198         return;
 199 }
 200
 201 static void qsgmii_configure_repeater(int dpmac)
 202 {
 203         uint8_t a = 0xf;
 204         int i, j;
 205         int i2c_phy_addr = 0;
 206         int phy_addr = 0;
 207         int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
 208
 209         uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
 210         uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
 211         uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
 212         uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
 213
 214         const char *dev = mdio_names[EMI1_SLOT1];
 215         int ret = 0;
 216         unsigned short value;
 217
 218         /* Set I2c to Slot 1 */
 219         i2c_write(0x77, 0, 0, &a, 1);
 220
 221         switch (dpmac) {
 222         case 7:
 223         case 8:
 224         case 9:
 225         case 10:
 226                 i2c_phy_addr = i2c_addr[2];
 227                 phy_addr = 8;
 228                 break;
 229
 230         case 3:
 231         case 4:
 232         case 5:
 233         case 6:
 234                 i2c_phy_addr = i2c_addr[3];
 235                 phy_addr = 0xc;
 236                 break;
 237         }
 238
 239         /* Check the PHY status */
 240         ret = miiphy_set_current_dev(dev);
 241         ret = miiphy_write(dev, phy_addr, 0x1f, 3);
 242         mdelay(10);
 243         ret = miiphy_read(dev, phy_addr, 0x11, &value);
 244         mdelay(10);
 245         ret = miiphy_read(dev, phy_addr, 0x11, &value);
 246         mdelay(10);
 247         if ((value & 0xf) == 0xf) {
 248                 miiphy_write(dev, phy_addr, 0x1f, 0);
 249                 printf("DPMAC %d :PHY is ..... Configured\n", dpmac);
 250                 return;
 251         }
 252
 253         for (i = 0; i < 4; i++) {
 254                 for (j = 0; j < 4; j++) {
 255                         a = 0x18;
 256                         i2c_write(i2c_phy_addr, 6, 1, &a, 1);
 257                         a = 0x38;
 258                         i2c_write(i2c_phy_addr, 4, 1, &a, 1);
 259                         a = 0x4;
 260                         i2c_write(i2c_phy_addr, 8, 1, &a, 1);
 261
 262                         i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1);
 263                         i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1);
 264
 265                         i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1);
 266                         i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1);
 267
 268                         a = 0x14;
 269                         i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
 270                         a = 0xb5;
 271                         i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
 272                         a = 0x20;
 273                         i2c_write(i2c_phy_addr, 4, 1, &a, 1);
 274                         mdelay(100);
 275                         ret = miiphy_read(dev, phy_addr, 0x11, &value);
 276                         if (ret > 0)
 277                                 goto error;
 278                         mdelay(1);
 279                         ret = miiphy_read(dev, phy_addr, 0x11, &value);
 280                         if (ret > 0)
 281                                 goto error;
 282                         mdelay(10);
 283                         if ((value & 0xf) == 0xf) {
 284                                 miiphy_write(dev, phy_addr, 0x1f, 0);
 285                                 printf("DPMAC %d :PHY is ..... Configured\n",
 286                                        dpmac);
 287                                 return;
 288                         }
 289                 }
 290         }
 291 error:
 292         printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac);
 293         return;
 294 }
 295
 296 static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval)
 297 {
 298         return mdio_names[muxval];
 299 }
 300
 301 struct mii_dev *mii_dev_for_muxval(u8 muxval)
 302 {
 303         struct mii_dev *bus;
 304         const char *name = ls1088a_qds_mdio_name_for_muxval(muxval);
 305
 306         if (!name) {
 307                 printf("No bus for muxval %x\n", muxval);
 308                 return NULL;
 309         }
 310
 311         bus = miiphy_get_dev_by_name(name);
 312
 313         if (!bus) {
 314                 printf("No bus by name %s\n", name);
 315                 return NULL;
 316         }
 317
 318         return bus;
 319 }
 320
 321 static void ls1088a_qds_enable_SFP_TX(u8 muxval)
 322 {
 323         u8 brdcfg9;
 324
 325         brdcfg9 = QIXIS_READ(brdcfg[9]);
 326         brdcfg9 &= ~BRDCFG9_SFPTX_MASK;
 327         brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT);
 328         QIXIS_WRITE(brdcfg[9], brdcfg9);
 329 }
 330
 331 static void ls1088a_qds_mux_mdio(u8 muxval)
 332 {
 333         u8 brdcfg4;
 334
 335         if (muxval <= 5) {
 336                 brdcfg4 = QIXIS_READ(brdcfg[4]);
 337                 brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
 338                 brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
 339                 QIXIS_WRITE(brdcfg[4], brdcfg4);
 340         }
 341 }
 342
 343 static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr,
 344                                  int devad, int regnum)
 345 {
 346         struct ls1088a_qds_mdio *priv = bus->priv;
 347
 348         ls1088a_qds_mux_mdio(priv->muxval);
 349
 350         return priv->realbus->read(priv->realbus, addr, devad, regnum);
 351 }
 352
 353 static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
 354                                   int regnum, u16 value)
 355 {
 356         struct ls1088a_qds_mdio *priv = bus->priv;
 357
 358         ls1088a_qds_mux_mdio(priv->muxval);
 359
 360         return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
 361 }
 362
 363 static int ls1088a_qds_mdio_reset(struct mii_dev *bus)
 364 {
 365         struct ls1088a_qds_mdio *priv = bus->priv;
 366
 367         return priv->realbus->reset(priv->realbus);
 368 }
 369
 370 static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval)
 371 {
 372         struct ls1088a_qds_mdio *pmdio;
 373         struct mii_dev *bus = mdio_alloc();
 374
 375         if (!bus) {
 376                 printf("Failed to allocate ls1088a_qds MDIO bus\n");
 377                 return -1;
 378         }
 379
 380         pmdio = malloc(sizeof(*pmdio));
 381         if (!pmdio) {
 382                 printf("Failed to allocate ls1088a_qds private data\n");
 383                 free(bus);
 384                 return -1;
 385         }
 386
 387         bus->read = ls1088a_qds_mdio_read;
 388         bus->write = ls1088a_qds_mdio_write;
 389         bus->reset = ls1088a_qds_mdio_reset;
 390         sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval));
 391
 392         pmdio->realbus = miiphy_get_dev_by_name(realbusname);
 393
 394         if (!pmdio->realbus) {
 395                 printf("No bus with name %s\n", realbusname);
 396                 free(bus);
 397                 free(pmdio);
 398                 return -1;
 399         }
 400
 401         pmdio->muxval = muxval;
 402         bus->priv = pmdio;
 403
 404         return mdio_register(bus);
 405 }
 406
 407 /*
 408  * Initialize the dpmac_info array.
 409  *
 410  */
 411 static void initialize_dpmac_to_slot(void)
 412 {
 413         struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
 414         u32 serdes1_prtcl, cfg;
 415
 416         cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
 417                                 FSL_CHASSIS3_SRDS1_PRTCL_MASK;
 418         cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
 419         serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
 420
 421         switch (serdes1_prtcl) {
 422         case 0x12:
 423                 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
 424                        serdes1_prtcl);
 425                 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
 426                 lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
 427                 lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
 428                 lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
 429                 break;
 430         case 0x15:
 431         case 0x1D:
 432                 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
 433                        serdes1_prtcl);
 434                 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
 435                 lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
 436                 lane_to_slot_fsm1[2] = EMI_NONE;
 437                 lane_to_slot_fsm1[3] = EMI_NONE;
 438                 break;
 439         case 0x1E:
 440                 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
 441                        serdes1_prtcl);
 442                 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
 443                 lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
 444                 lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
 445                 lane_to_slot_fsm1[3] = EMI_NONE;
 446                 break;
 447         case 0x3A:
 448                 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
 449                        serdes1_prtcl);
 450                 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
 451                 lane_to_slot_fsm1[1] = EMI_NONE;
 452                 lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
 453                 lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
 454                 break;
 455
 456         default:
 457                 printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
 458                        __func__, serdes1_prtcl);
 459                 break;
 460         }
 461 }
 462
 463 void ls1088a_handle_phy_interface_sgmii(int dpmac_id)
 464 {
 465         struct mii_dev *bus;
 466         struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
 467         u32 serdes1_prtcl, cfg;
 468
 469         cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
 470                                 FSL_CHASSIS3_SRDS1_PRTCL_MASK;
 471         cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
 472         serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
 473
 474         int *riser_phy_addr;
 475         char *env_hwconfig = env_get("hwconfig");
 476
 477         if (hwconfig_f("xqsgmii", env_hwconfig))
 478                 riser_phy_addr = &xqsgii_riser_phy_addr[0];
 479         else
 480                 riser_phy_addr = &sgmii_riser_phy_addr[0];
 481
 482         switch (serdes1_prtcl) {
 483         case 0x12:
 484         case 0x15:
 485         case 0x1E:
 486         case 0x3A:
 487                 switch (dpmac_id) {
 488                 case 1:
 489                         wriop_set_phy_address(dpmac_id, riser_phy_addr[1]);
 490                         break;
 491                 case 2:
 492                         wriop_set_phy_address(dpmac_id, riser_phy_addr[0]);
 493                         break;
 494                 case 3:
 495                         wriop_set_phy_address(dpmac_id, riser_phy_addr[3]);
 496                         break;
 497                 case 7:
 498                         wriop_set_phy_address(dpmac_id, riser_phy_addr[2]);
 499                         break;
 500                 default:
 501                         printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id);
 502                         break;
 503                 }
 504                 break;
 505         default:
 506                 printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
 507                        __func__, serdes1_prtcl);
 508                 return;
 509         }
 510         dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
 511         bus = mii_dev_for_muxval(EMI1_SLOT1);
 512         wriop_set_mdio(dpmac_id, bus);
 513 }
 514
 515 void ls1088a_handle_phy_interface_qsgmii(int dpmac_id)
 516 {
 517         struct mii_dev *bus;
 518         struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
 519         u32 serdes1_prtcl, cfg;
 520
 521         cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
 522                                 FSL_CHASSIS3_SRDS1_PRTCL_MASK;
 523         cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
 524         serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
 525
 526         switch (serdes1_prtcl) {
 527         case 0x1D:
 528         case 0x1E:
 529                 switch (dpmac_id) {
 530                 case 3:
 531                 case 4:
 532                 case 5:
 533                 case 6:
 534                         wriop_set_phy_address(dpmac_id, dpmac_id + 9);
 535                         break;
 536                 case 7:
 537                 case 8:
 538                 case 9:
 539                 case 10:
 540                         wriop_set_phy_address(dpmac_id, dpmac_id + 1);
 541                         break;
 542                 }
 543
 544                 dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
 545                 bus = mii_dev_for_muxval(EMI1_SLOT1);
 546                 wriop_set_mdio(dpmac_id, bus);
 547                 break;
 548         default:
 549                 printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
 550                        serdes1_prtcl);
 551                 break;
 552         }
 553 }
 554
 555 void ls1088a_handle_phy_interface_xsgmii(int i)
 556 {
 557         struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
 558         u32 serdes1_prtcl, cfg;
 559
 560         cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
 561                                 FSL_CHASSIS3_SRDS1_PRTCL_MASK;
 562         cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
 563         serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
 564
 565         switch (serdes1_prtcl) {
 566         case 0x15:
 567         case 0x1D:
 568         case 0x1E:
 569                 wriop_set_phy_address(i, i + 26);
 570                 ls1088a_qds_enable_SFP_TX(SFP_TX);
 571                 break;
 572         default:
 573                 printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
 574                        serdes1_prtcl);
 575                 break;
 576         }
 577 }
 578
 579 static void ls1088a_handle_phy_interface_rgmii(int dpmac_id)
 580 {
 581         struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
 582         u32 serdes1_prtcl, cfg;
 583         struct mii_dev *bus;
 584
 585         cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
 586                                 FSL_CHASSIS3_SRDS1_PRTCL_MASK;
 587         cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
 588         serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
 589
 590         switch (dpmac_id) {
 591         case 4:
 592                 wriop_set_phy_address(dpmac_id, RGMII_PHY1_ADDR);
 593                 dpmac_info[dpmac_id].board_mux = EMI1_RGMII1;
 594                 bus = mii_dev_for_muxval(EMI1_RGMII1);
 595                 wriop_set_mdio(dpmac_id, bus);
 596                 break;
 597         case 5:
 598                 wriop_set_phy_address(dpmac_id, RGMII_PHY2_ADDR);
 599                 dpmac_info[dpmac_id].board_mux = EMI1_RGMII2;
 600                 bus = mii_dev_for_muxval(EMI1_RGMII2);
 601                 wriop_set_mdio(dpmac_id, bus);
 602                 break;
 603         default:
 604                 printf("qds: WRIOP: Unsupported RGMII SerDes Protocol 0x%02x\n",
 605                        serdes1_prtcl);
 606                 break;
 607         }
 608 }
 609 #endif
 610
 611 int board_eth_init(bd_t *bis)
 612 {
 613         int error = 0, i;
 614 #ifdef CONFIG_FSL_MC_ENET
 615         struct memac_mdio_info *memac_mdio0_info;
 616         char *env_hwconfig = env_get("hwconfig");
 617
 618         initialize_dpmac_to_slot();
 619
 620         memac_mdio0_info = (struct memac_mdio_info *)malloc(
 621                                         sizeof(struct memac_mdio_info));
 622         memac_mdio0_info->regs =
 623                 (struct memac_mdio_controller *)
 624                                         CONFIG_SYS_FSL_WRIOP1_MDIO1;
 625         memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME;
 626
 627         /* Register the real MDIO1 bus */
 628         fm_memac_mdio_init(bis, memac_mdio0_info);
 629         /* Register the muxing front-ends to the MDIO buses */
 630         ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1);
 631         ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2);
 632         ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
 633
 634         for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
 635                 switch (wriop_get_enet_if(i)) {
 636                 case PHY_INTERFACE_MODE_RGMII:
 637                         ls1088a_handle_phy_interface_rgmii(i);
 638                         break;
 639                 case PHY_INTERFACE_MODE_QSGMII:
 640                         ls1088a_handle_phy_interface_qsgmii(i);
 641                         break;
 642                 case PHY_INTERFACE_MODE_SGMII:
 643                         ls1088a_handle_phy_interface_sgmii(i);
 644                         break;
 645                 case PHY_INTERFACE_MODE_XGMII:
 646                         ls1088a_handle_phy_interface_xsgmii(i);
 647                         break;
 648                 default:
 649                         break;
 650
 651                 if (i == 16)
 652                         i = NUM_WRIOP_PORTS;
 653                 }
 654         }
 655
 656         error = cpu_eth_init(bis);
 657
 658         if (hwconfig_f("xqsgmii", env_hwconfig)) {
 659                 for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
 660                         switch (wriop_get_enet_if(i)) {
 661                         case PHY_INTERFACE_MODE_QSGMII:
 662                                 qsgmii_configure_repeater(i);
 663                                 break;
 664                         case PHY_INTERFACE_MODE_SGMII:
 665                                 sgmii_configure_repeater(i);
 666                                 break;
 667                         default:
 668                                 break;
 669                         }
 670
 671                         if (i == 16)
 672                                 i = NUM_WRIOP_PORTS;
 673                 }
 674         }
 675 #endif
 676         error = pci_eth_init(bis);
 677         return error;
 678 }
 679
 680 #if defined(CONFIG_RESET_PHY_R)
 681 void reset_phy(void)
 682 {
 683         mc_env_boot();
 684 }
 685 #endif /* CONFIG_RESET_PHY_R */