git.sur5r.net Git - u-boot/blob - board/freescale/mpc8569mds/ddr.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright 2009 Freescale Semiconductor, Inc.
   4  */
   5
   6 #include <common.h>
   7
   8 #include <fsl_ddr_sdram.h>
   9 #include <fsl_ddr_dimm_params.h>
  10
  11 void fsl_ddr_board_options(memctl_options_t *popts,
  12                                 dimm_params_t *pdimm,
  13                                 unsigned int ctrl_num)
  14 {
  15         /*
  16          * Factors to consider for clock adjust:
  17          *      - number of chips on bus
  18          *      - position of slot
  19          *      - DDR1 vs. DDR2?
  20          *      - ???
  21          *
  22          * This needs to be determined on a board-by-board basis.
  23          *      0110    3/4 cycle late
  24          *      0111    7/8 cycle late
  25          */
  26         popts->clk_adjust = 4;
  27
  28         /*
  29          * Factors to consider for CPO:
  30          *      - frequency
  31          *      - ddr1 vs. ddr2
  32          */
  33         popts->cpo_override = 0xff;
  34
  35         /*
  36          * Factors to consider for write data delay:
  37          *      - number of DIMMs
  38          *
  39          * 1 = 1/4 clock delay
  40          * 2 = 1/2 clock delay
  41          * 3 = 3/4 clock delay
  42          * 4 = 1   clock delay
  43          * 5 = 5/4 clock delay
  44          * 6 = 3/2 clock delay
  45          */
  46         popts->write_data_delay = 2;
  47
  48         /*
  49          * Enable half drive strength
  50          */
  51         popts->half_strength_driver_enable = 1;
  52
  53         /* Write leveling override */
  54         popts->wrlvl_en = 1;
  55         popts->wrlvl_override = 1;
  56         popts->wrlvl_sample = 0xa;
  57         popts->wrlvl_start = 0x4;
  58
  59         /* Rtt and Rtt_W override */
  60         popts->rtt_override = 1;
  61         popts->rtt_override_value = DDR3_RTT_60_OHM;
  62         popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */
  63 }