2 * Copyright 2009-2011 Freescale Semiconductor, Inc.
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 #include <asm/processor.h>
27 #include <asm/cache.h>
28 #include <asm/immap_85xx.h>
29 #include <asm/fsl_serdes.h>
33 #include <fdt_support.h>
41 DECLARE_GLOBAL_DATA_PTR;
43 #define VSC7385_RST_SET 0x00080000
44 #define SLIC_RST_SET 0x00040000
45 #define SGMII_PHY_RST_SET 0x00020000
46 #define PCIE_RST_SET 0x00010000
47 #define RGMII_PHY_RST_SET 0x02000000
49 #define USB_RST_CLR 0x04000000
50 #define USB2_PORT_OUT_EN 0x01000000
52 #define GPIO_DIR 0x060f0000
54 #define BOARD_PERI_RST_SET VSC7385_RST_SET | SLIC_RST_SET | \
55 SGMII_PHY_RST_SET | PCIE_RST_SET | \
58 #define SYSCLK_MASK 0x00200000
59 #define BOARDREV_MASK 0x10100000
60 #define BOARDREV_C 0x00100000
61 #define BOARDREV_D 0x00000000
63 #define SYSCLK_66 66666666
64 #define SYSCLK_100 100000000
66 unsigned long get_board_sys_clk(ulong dummy)
68 volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
69 u32 val_gpdat, sysclk_gpio;
71 val_gpdat = in_be32(&pgpio->gpdat);
72 sysclk_gpio = val_gpdat & SYSCLK_MASK;
83 int board_early_init_f (void)
85 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
87 setbits_be32(&gur->pmuxcr,
88 (MPC85xx_PMUXCR_SDHC_CD |
89 MPC85xx_PMUXCR_SDHC_WP));
96 u32 val_gpdat, board_rev_gpio;
97 volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
101 val_gpdat = in_be32(&pgpio->gpdat);
102 board_rev_gpio = val_gpdat & BOARDREV_MASK;
103 if (board_rev_gpio == BOARDREV_C)
105 else if (board_rev_gpio == BOARDREV_D)
108 panic ("Unexpected Board REV %x detected!!\n", board_rev_gpio);
111 printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
112 #ifdef CONFIG_PHYS_64BIT
113 puts ("(36-bit addrmap) \n");
115 setbits_be32(&pgpio->gpdir, GPIO_DIR);
118 * Bringing the following peripherals out of reset via GPIOs
119 * 0 = reset and 1 = out of reset
120 * GPIO12 - Reset to Ethernet Switch
121 * GPIO13 - Reset to SLIC/SLAC devices
122 * GPIO14 - Reset to SGMII_PHY_N
123 * GPIO15 - Reset to PCIe slots
124 * GPIO6 - Reset to RGMII PHY
125 * GPIO5 - Reset to USB3300 devices 1 = reset and 0 = out of reset
127 clrsetbits_be32(&pgpio->gpdat, USB_RST_CLR, BOARD_PERI_RST_SET);
132 int misc_init_r(void)
134 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
135 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
136 ccsr_gpio_t *gpio = (void *)CONFIG_SYS_MPC85xx_GPIO_ADDR;
138 setbits_be32(&gpio->gpdir, USB2_PORT_OUT_EN);
139 setbits_be32(&gpio->gpdat, USB2_PORT_OUT_EN);
140 setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_ELBC_OFF_USB2_ON);
145 int board_early_init_r(void)
147 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
148 const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
149 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
150 unsigned int orig_bus = i2c_get_bus_num();
154 if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0,
155 1, &i2c_data, sizeof(i2c_data)) == 0) {
157 puts("NOR Flash Bank : Secondary\n");
159 puts("NOR Flash Bank : Primary\n");
161 if (i2c_data & 0x1) {
162 setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
163 puts("SD/MMC : 8-bit Mode\n");
164 puts("eSPI : Disabled\n");
166 puts("SD/MMC : 4-bit Mode\n");
167 puts("eSPI : Enabled\n");
170 puts("Failed reading I2C Chip 0x18 on bus 1\n");
172 i2c_set_bus_num(orig_bus);
175 * Remap Boot flash region to caching-inhibited
176 * so that flash can be erased properly.
179 /* Flush d-cache and invalidate i-cache of any FLASH data */
183 /* invalidate existing TLB entry for flash */
184 disable_tlb(flash_esel);
186 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
187 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
188 0, flash_esel, BOOKE_PAGESZ_16M, 1);
194 #ifdef CONFIG_TSEC_ENET
195 int board_eth_init(bd_t *bis)
197 struct fsl_pq_mdio_info mdio_info;
198 struct tsec_info_struct tsec_info[4];
201 unsigned int vscfw_addr;
204 SET_STD_TSEC_INFO(tsec_info[num], 1);
208 SET_STD_TSEC_INFO(tsec_info[num], 2);
212 SET_STD_TSEC_INFO(tsec_info[num], 3);
213 if (is_serdes_configured(SGMII_TSEC3)) {
214 puts("eTSEC3 is in sgmii mode.\n");
215 tsec_info[num].flags |= TSEC_SGMII;
220 printf("No TSECs initialized\n");
223 #ifdef CONFIG_VSC7385_ENET
224 /* If a VSC7385 microcode image is present, then upload it. */
225 if ((tmp = getenv ("vscfw_addr")) != NULL) {
226 vscfw_addr = simple_strtoul (tmp, NULL, 16);
227 printf("uploading VSC7385 microcode from %x\n", vscfw_addr);
228 if (vsc7385_upload_firmware((void *) vscfw_addr,
229 CONFIG_VSC7385_IMAGE_SIZE))
230 puts("Failure uploading VSC7385 microcode.\n");
232 puts("No address specified for VSC7385 microcode.\n");
235 mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
236 mdio_info.name = DEFAULT_MII_NAME;
237 fsl_pq_mdio_init(bis, &mdio_info);
239 tsec_eth_init(bis, tsec_info, num);
241 return pci_eth_init(bis);
245 #if defined(CONFIG_OF_BOARD_SETUP)
246 extern void ft_pci_board_setup(void *blob);
248 void ft_board_setup(void *blob, bd_t *bd)
253 ft_cpu_setup(blob, bd);
255 base = getenv_bootm_low();
256 size = getenv_bootm_size();
258 #if defined(CONFIG_PCI)
259 ft_pci_board_setup(blob);
260 #endif /* #if defined(CONFIG_PCI) */
262 fdt_fixup_memory(blob, (u64)base, (u64)size);