2 * Copyright 2011,2012 Freescale Semiconductor, Inc.
4 * SPDX-License-Identifier: GPL-2.0+
10 #include <linux/compiler.h>
12 #include <asm/processor.h>
13 #include <asm/cache.h>
14 #include <asm/immap_85xx.h>
15 #include <asm/fsl_law.h>
16 #include <asm/fsl_serdes.h>
17 #include <asm/fsl_portals.h>
18 #include <asm/fsl_liodn.h>
21 extern void pci_of_setup(void *blob, bd_t *bd);
25 DECLARE_GLOBAL_DATA_PTR;
30 struct cpu_type *cpu = gd->arch.cpu;
33 printf("Board: %sRDB, ", cpu->name);
34 printf("CPLD version: %d.%d ", CPLD_READ(cpld_ver),
35 CPLD_READ(cpld_ver_sub));
37 sw = CPLD_READ(fbank_sel);
38 printf("vBank: %d\n", sw & 0x1);
41 * Display the actual SERDES reference clocks as configured by the
42 * dip switches on the board. Note that the SWx registers could
43 * technically be set to force the reference clocks to match the
44 * values that the SERDES expects (or vice versa). For now, however,
45 * we just display both values and hope the user notices when they
48 puts("SERDES Reference Clocks: ");
49 sw = in_8(&CPLD_SW(2)) >> 2;
50 for (i = 0; i < 2; i++) {
51 static const char * const freq[][3] = {{"0", "100", "125"},
52 {"100", "156.25", "125"}
54 unsigned int clock = (sw >> (2 * i)) & 3;
56 printf("Bank%u=%sMhz ", i+1, freq[i][clock]);
63 int board_early_init_f(void)
65 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
67 /* board only uses the DDR_MCK0/1, so disable the DDR_MCK2/3 */
68 setbits_be32(&gur->ddrclkdr, 0x000f000f);
73 #define CPLD_LANE_A_SEL 0x1
74 #define CPLD_LANE_G_SEL 0x2
75 #define CPLD_LANE_C_SEL 0x4
76 #define CPLD_LANE_D_SEL 0x8
78 void board_config_lanes_mux(void)
80 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
81 int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
82 FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
93 mux |= CPLD_LANE_C_SEL | CPLD_LANE_D_SEL;
96 mux |= CPLD_LANE_A_SEL;
99 mux |= CPLD_LANE_G_SEL;
104 mux |= CPLD_LANE_G_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL;
107 mux |= CPLD_LANE_G_SEL | CPLD_LANE_A_SEL;
110 printf("Fman:Unsupported SerDes Protocol 0x%02x\n", srds_prtcl);
113 CPLD_WRITE(serdes_mux, mux);
116 int board_early_init_r(void)
118 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
119 const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
122 * Remap Boot flash + PROMJET region to caching-inhibited
123 * so that flash can be erased properly.
126 /* Flush d-cache and invalidate i-cache of any FLASH data */
130 /* invalidate existing TLB entry for flash + promjet */
131 disable_tlb(flash_esel);
133 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
134 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
135 0, flash_esel, BOOKE_PAGESZ_256M, 1);
139 board_config_lanes_mux();
144 unsigned long get_board_sys_clk(unsigned long dummy)
146 u8 sysclk_conf = CPLD_READ(sysclk_sw1);
148 switch (sysclk_conf & 0x7) {
151 case CPLD_SYSCLK_100:
158 #define NUM_SRDS_BANKS 2
160 int misc_init_r(void)
162 serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
163 u32 actual[NUM_SRDS_BANKS];
166 static const int freq[][3] = {
167 {0, SRDS_PLLCR0_RFCK_SEL_100, SRDS_PLLCR0_RFCK_SEL_125},
168 {SRDS_PLLCR0_RFCK_SEL_100, SRDS_PLLCR0_RFCK_SEL_156_25,
169 SRDS_PLLCR0_RFCK_SEL_125}
172 sw = in_8(&CPLD_SW(2)) >> 2;
173 for (i = 0; i < NUM_SRDS_BANKS; i++) {
174 unsigned int clock = (sw >> (2 * i)) & 3;
176 printf("Warning: SDREFCLK%u switch setting of '11' is "
177 "unsupported\n", i + 1);
180 if (i == 0 && clock == 0)
181 puts("Warning: SDREFCLK1 switch setting of"
182 "'00' is unsupported\n");
184 actual[i] = freq[i][clock];
187 * PC board uses a different CPLD with PB board, this CPLD
188 * has cpld_ver_sub = 1, and pcba_ver = 5. But CPLD on PB
189 * board has cpld_ver_sub = 0, and pcba_ver = 4.
191 if ((i == 1) && (CPLD_READ(cpld_ver_sub) == 1) &&
192 (CPLD_READ(pcba_ver) == 5)) {
193 /* PC board bank2 frequency */
194 actual[i] = freq[i-1][clock];
198 for (i = 0; i < NUM_SRDS_BANKS; i++) {
199 u32 expected = in_be32(®s->bank[i].pllcr0);
200 expected &= SRDS_PLLCR0_RFCK_SEL_MASK;
201 if (expected != actual[i]) {
202 printf("Warning: SERDES bank %u expects reference clock"
203 " %sMHz, but actual is %sMHz\n", i + 1,
204 serdes_clock_to_string(expected),
205 serdes_clock_to_string(actual[i]));
212 void ft_board_setup(void *blob, bd_t *bd)
217 ft_cpu_setup(blob, bd);
219 base = getenv_bootm_low();
220 size = getenv_bootm_size();
222 fdt_fixup_memory(blob, (u64)base, (u64)size);
224 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
225 fdt_fixup_dr_usb(blob, bd);
229 pci_of_setup(blob, bd);
232 fdt_fixup_liodn(blob);
233 #ifdef CONFIG_SYS_DPAA_FMAN
234 fdt_fixup_fman_ethernet(blob);