3 The T1040RDB is a Freescale reference board that hosts the T1040 SoC
4 (and variants). Variants inclued T1042 presonality of T1040, in which
5 case T1040RDB can also be called T1042RDB.
7 The T1042RDB is a Freescale reference board that hosts the T1042 SoC
8 (and variants). The board is similar to T1040RDB, T1040 is a reduced
9 personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch).
11 The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC.
12 (a personality of T1040 SoC). The board is similar to T1040RDB but is
13 designed specially with low power features targeted for Printing Image Market.
15 Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB
16 -------------------------------------------------------------------------
17 Board Si Protocol Targeted Market
18 -------------------------------------------------------------------------
19 T1040RDB T1040 0x66 Networking
20 T1040RDB T1042 0x86 Networking
21 T1042RDB_PI T1042 0x06 Printing & Imaging
26 The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
27 processor cores with high-performance data path acceleration architecture
28 and network peripheral interfaces required for networking & telecommunications.
30 The T1040/T1042 SoC includes the following function and features:
32 - Four e5500 cores, each with a private 256 KB L2 cache
33 - 256 KB shared L3 CoreNet platform cache (CPC)
34 - Interconnect CoreNet platform
35 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
37 - Data Path Acceleration Architecture (DPAA) incorporating acceleration
38 for the following functions:
39 - Packet parsing, classification, and distribution
40 - Queue management for scheduling, packet sequencing, and congestion
42 - Cryptography Acceleration (SEC 5.0)
43 - RegEx Pattern Matching Acceleration (PME 2.2)
44 - IEEE Std 1588 support
45 - Hardware buffer management for buffer allocation and deallocation
47 - Integrated 8-port Gigabit Ethernet switch (T1040 only)
48 - Four 1 Gbps Ethernet controllers
49 - Two RGMII interfaces or one RGMII and one MII interfaces
50 - High speed peripheral interfaces
51 - Four PCI Express 2.0 controllers running at up to 5 GHz
52 - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation
53 - Upto two QSGMII interface
54 - Upto six SGMII interface supporting 1000 Mbps
55 - One SGMII interface supporting upto 2500 Mbps
56 - Additional peripheral interfaces
57 - Two USB 2.0 controllers with integrated PHY
60 - Four I2C controllers
62 - Four GPIO controllers
63 - Integrated flash controller (IFC)
64 - LCD and HDMI interface (DIU) with 12 bit dual data rate
66 - Multicore programmable interrupt controller (PIC)
67 - Two 8-channel DMA engines
68 - Single source clocking implementation
69 - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
71 T1040 SoC Personalities
72 -------------------------
75 T1022 is a reduced personality of T1040 with less core/clusters.
78 T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit
79 Ethernet switch. Rest of the blocks are same as T1040
82 T1040RDB board Overview
83 -------------------------
84 - SERDES Connections, 8 lanes information:
90 6: mini PCIe connector
91 7: mini PCIe connector
94 - Supports rates of up to 1600 MHz data-rate
95 - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
97 - NAND flash: 1GB 8-bit NAND flash
98 - NOR: 128MB 16-bit NOR Flash
100 - Two on-board RGMII 10/100/1G ethernet ports.
103 - System and DDR clock (SYSCLK, “DDRCLK”)
107 - Supports two USB 2.0 ports with integrated PHYs
108 - Two type A ports with 5V@1.5A per port.
110 - SDHC/SDXC connector
112 - On-board 64MB SPI flash
117 T1042RDB_PI board Overview
118 -------------------------
119 - SERDES Connections, 8 lanes information:
120 1, 2, 3, 4 : PCIe x4 slot
121 5: mini PCIe connector
122 6: mini PCIe connector
126 - Supports rates of up to 1600 MHz data-rate
127 - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
129 - NAND flash: 1GB 8-bit NAND flash
130 - NOR: 128MB 16-bit NOR Flash
132 - Two on-board RGMII 10/100/1G ethernet ports.
135 - System and DDR clock (SYSCLK, “DDRCLK”)
138 - DIU supports video at up to 1280x1024x32bpp
141 - Supports two USB 2.0 ports with integrated PHYs
142 - Two type A ports with 5V@1.5A per port.
144 - SDHC/SDXC connector
146 - On-board 64MB SPI flash
153 The addresses in brackets are physical addresses.
155 Start Address End Address Description Size
156 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
157 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
158 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
159 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
160 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
161 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
162 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
163 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
164 0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
165 0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
166 0xF_0000_0000 0xF_003F_FFFF DCSR 4MB
167 0xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB
168 0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB
169 0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB
170 0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB
171 0x0_0000_0000 0x0_ffff_ffff DDR 2GB
175 ---------------------
176 Start End Definition Size
177 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
178 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
179 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
180 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
181 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
182 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
183 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
184 0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
185 0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
186 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
187 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
188 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB
189 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
190 0xE8000000 0xE801FFFF RCW (current bank) 128KB
193 Various Software configurations/environment variables/commands
194 --------------------------------------------------------------
195 The below commands apply to the board
197 1. U-boot environment variable hwconfig
198 The default hwconfig is:
199 hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
200 dr_mode=host,phy_type=utmi
201 Note: For USB gadget set "dr_mode=peripheral"
203 2. FMAN Ucode versions
204 fsl_fman_ucode_t1040.bin
206 3. Switching to alternate bank
207 Commands for switching to alternate bank.
209 1. To change from vbank0 to vbank4
210 => cpld reset altbank (it will boot using vbank4)
212 2.To change from vbank4 to vbank0
213 => cpld reset (it will boot using vbank0)
215 NAND boot with 2 Stage boot loader
216 ----------------------------------
217 PBL initialise the internal SRAM and copy SPL(160KB) in SRAM.
218 SPL further initialise DDR using SPD and environment variables and copy
219 u-boot(768 KB) from flash to DDR.
220 Finally SPL transer control to u-boot for futher booting.
222 SPL has following features:
223 - Executes within 256K
224 - No relocation required
226 Run time view of SPL framework during boot :-
227 -----------------------------------------------
229 -----------------------------------------------
230 Secure boot | 0xFFFC0000 (32KB) |
232 -----------------------------------------------
233 GD, BD | 0xFFFC8000 (4KB) |
234 -----------------------------------------------
235 ENV | 0xFFFC9000 (8KB) |
236 -----------------------------------------------
237 HEAP | 0xFFFCB000 (30KB) |
238 -----------------------------------------------
239 STACK | 0xFFFD8000 (22KB) |
240 -----------------------------------------------
241 U-boot SPL | 0xFFFD8000 (160KB) |
242 -----------------------------------------------
244 NAND Flash memory Map on T104xRDB
245 ------------------------------------------
246 Start End Definition Size
247 0x000000 0x0FFFFF u-boot 1MB
248 0x180000 0x19FFFF u-boot env 128KB
249 0x280000 0x29FFFF FMAN Ucode 128KB
250 0x380000 0x39FFFF QE Firmware 128KB
252 SD Card memory Map on T104xRDB
253 ------------------------------------------
254 Block #blocks Definition Size
255 0x008 2048 u-boot 1MB
256 0x800 0024 u-boot env 8KB
257 0x820 0256 FMAN Ucode 128KB
258 0x920 0256 QE Firmware 128KB
260 SPI Flash memory Map on T104xRDB
261 ------------------------------------------
262 Start End Definition Size
263 0x000000 0x0FFFFF u-boot 1MB
264 0x100000 0x101FFF u-boot env 8KB
265 0x110000 0x12FFFF FMAN Ucode 128KB
266 0x130000 0x14FFFF QE Firmware 128KB
268 Please note QE Firmware is only valid for T1040RDB
271 Switch Settings: (ON is 0, OFF is 1)
273 NAND boot SW setting: