3 * Gumstix Inc. <www.gumstix.com>
4 * Maintainer: Ash Charles <ash@gumstix.com>
6 * SPDX-License-Identifier: GPL-2.0+
10 #include <asm/arch/sys_proto.h>
11 #include <asm/arch/mmc_host_def.h>
14 #include <asm/arch/clock.h>
15 #include <asm/arch/gpio.h>
18 #include "duovero_mux_data.h"
22 #if defined(CONFIG_CMD_NET)
23 #define SMSC_NRESET 45
24 static void setup_net_chip(void);
27 #ifdef CONFIG_USB_EHCI
29 #include <asm/arch/ehci.h>
30 #include <asm/ehci-omap.h>
33 DECLARE_GLOBAL_DATA_PTR;
35 const struct omap_sysinfo sysinfo = {
39 struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000;
50 gd->bd->bi_arch_number = MACH_TYPE_OMAP4_DUOVERO;
51 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
57 * @brief misc_init_r - Configure board specific configurations
58 * such as power configurations, ethernet initialization as phase2 of
68 /* wifi setup: first enable 32Khz clock from 6030 pmic */
70 ret = i2c_write(TWL6030_CHIP_PM, 0xbe, 1, &val, 1);
72 printf("Failed to enable 32Khz clock to wifi module\n");
74 /* then setup WIFI_EN as an output pin and send reset pulse */
75 if (!gpio_request(WIFI_EN, "")) {
76 gpio_direction_output(WIFI_EN, 0);
77 gpio_set_value(WIFI_EN, 1);
79 gpio_set_value(WIFI_EN, 0);
81 gpio_set_value(WIFI_EN, 1);
84 #if defined(CONFIG_CMD_NET)
90 void set_muxconf_regs_essential(void)
92 do_set_mux((*ctrl)->control_padconf_core_base,
93 core_padconf_array_essential,
94 sizeof(core_padconf_array_essential) /
95 sizeof(struct pad_conf_entry));
97 do_set_mux((*ctrl)->control_padconf_wkup_base,
98 wkup_padconf_array_essential,
99 sizeof(wkup_padconf_array_essential) /
100 sizeof(struct pad_conf_entry));
102 do_set_mux((*ctrl)->control_padconf_core_base,
103 core_padconf_array_non_essential,
104 sizeof(core_padconf_array_non_essential) /
105 sizeof(struct pad_conf_entry));
107 do_set_mux((*ctrl)->control_padconf_wkup_base,
108 wkup_padconf_array_non_essential,
109 sizeof(wkup_padconf_array_non_essential) /
110 sizeof(struct pad_conf_entry));
113 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
114 int board_mmc_init(bd_t *bis)
116 return omap_mmc_init(0, 0, 0, -1, -1);
121 #if defined(CONFIG_CMD_NET)
123 #define GPMC_SIZE_16M 0xF
124 #define GPMC_BASEADDR_MASK 0x3F
125 #define GPMC_CS_ENABLE 0x1
127 static void enable_gpmc_net_config(const u32 *gpmc_config, struct gpmc_cs *cs,
130 writel(0, &cs->config7);
132 /* Delay for settling */
133 writel(gpmc_config[0], &cs->config1);
134 writel(gpmc_config[1], &cs->config2);
135 writel(gpmc_config[2], &cs->config3);
136 writel(gpmc_config[3], &cs->config4);
137 writel(gpmc_config[4], &cs->config5);
138 writel(gpmc_config[5], &cs->config6);
141 * Enable the config. size is the CS size and goes in
142 * bits 11:8. We set bit 6 to enable this CS and the base
143 * address goes into bits 5:0.
145 writel((size << 8) | (GPMC_CS_ENABLE << 6) |
146 ((base >> 24) & GPMC_BASEADDR_MASK),
152 /* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
153 #define NET_LAN9221_GPMC_CONFIG1 0x2a001203
154 #define NET_LAN9221_GPMC_CONFIG2 0x000a0a02
155 #define NET_LAN9221_GPMC_CONFIG3 0x00020200
156 #define NET_LAN9221_GPMC_CONFIG4 0x0a030a03
157 #define NET_LAN9221_GPMC_CONFIG5 0x000a0a0a
158 #define NET_LAN9221_GPMC_CONFIG6 0x8a070707
159 #define NET_LAN9221_GPMC_CONFIG7 0x00000f6c
161 /* GPMC definitions for LAN9221 chips on expansion boards */
162 static const u32 gpmc_lan_config[] = {
163 NET_LAN9221_GPMC_CONFIG1,
164 NET_LAN9221_GPMC_CONFIG2,
165 NET_LAN9221_GPMC_CONFIG3,
166 NET_LAN9221_GPMC_CONFIG4,
167 NET_LAN9221_GPMC_CONFIG5,
168 NET_LAN9221_GPMC_CONFIG6,
169 /*CONFIG7- computed as params */
173 * Routine: setup_net_chip
174 * Description: Setting up the configuration GPMC registers specific to the
177 static void setup_net_chip(void)
179 enable_gpmc_net_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
182 /* Make GPIO SMSC_NRESET as output pin and send reset pulse */
183 if (!gpio_request(SMSC_NRESET, "")) {
184 gpio_direction_output(SMSC_NRESET, 0);
185 gpio_set_value(SMSC_NRESET, 1);
187 gpio_set_value(SMSC_NRESET, 0);
189 gpio_set_value(SMSC_NRESET, 1);
194 int board_eth_init(bd_t *bis)
197 #ifdef CONFIG_SMC911X
198 rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
203 #ifdef CONFIG_USB_EHCI
205 static struct omap_usbhs_board_data usbhs_bdata = {
206 .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
207 .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
208 .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
211 int ehci_hcd_init(int index, enum usb_init_type init,
212 struct ehci_hccr **hccr, struct ehci_hcor **hcor)
215 unsigned int utmi_clk;
216 u32 auxclk, altclksrc;
218 /* Now we can enable our port clocks */
219 utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
220 utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
221 setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk);
223 auxclk = readl(&scrm->auxclk3);
225 auxclk &= ~AUXCLK_SRCSELECT_MASK;
226 auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT;
227 /* Set the divisor to 2 */
228 auxclk &= ~AUXCLK_CLKDIV_MASK;
229 auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT;
230 /* Request auxilary clock #3 */
231 auxclk |= AUXCLK_ENABLE_MASK;
232 writel(auxclk, &scrm->auxclk3);
234 altclksrc = readl(&scrm->altclksrc);
236 /* Activate alternate system clock supplier */
237 altclksrc &= ~ALTCLKSRC_MODE_MASK;
238 altclksrc |= ALTCLKSRC_MODE_ACTIVE;
241 altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK;
243 writel(altclksrc, &scrm->altclksrc);
245 ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
252 int ehci_hcd_stop(int index)
254 return omap_ehci_hcd_stop();
259 * get_board_rev() - get board revision
261 u32 get_board_rev(void)