3 * Logic Product Development <www.logicpd.com>
6 * Peter Barada <peter.barada@logicpd.com>
8 * Derived from Beagle Board and 3430 SDP code by
9 * Richard Woodruff <r-woodruff2@ti.com>
10 * Syed Mohammed Khasim <khasim@ti.com>
12 * See file CREDITS for list of people who contributed to this
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License as
17 * published by the Free Software Foundation; either version 2 of
18 * the License, or (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
37 #include <asm/arch/mmc_host_def.h>
38 #include <asm/arch/mux.h>
39 #include <asm/arch/mem.h>
40 #include <asm/arch/sys_proto.h>
42 #include <asm/mach-types.h>
43 #include "omap3logic.h"
45 DECLARE_GLOBAL_DATA_PTR;
48 * two dimensional array of strucures containining board name and Linux
49 * machine IDs; row it selected based on CPU column is slected based
50 * on hsusb0_data5 pin having a pulldown resistor
52 static struct board_id {
58 .name = "OMAP35xx SOM LV",
59 .machine_id = MACH_TYPE_OMAP3530_LV_SOM,
62 .name = "OMAP35xx Torpedo",
63 .machine_id = MACH_TYPE_OMAP3_TORPEDO,
68 .name = "DM37xx SOM LV",
69 .machine_id = MACH_TYPE_DM3730_SOM_LV,
72 .name = "DM37xx Torpedo",
73 .machine_id = MACH_TYPE_DM3730_TORPEDO,
79 * BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM LV
81 #define BOARD_ID_GPIO 189 /* hsusb0_data5 pin */
85 * Description: Early hardware init.
89 struct board_id *board;
92 gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
95 gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
98 * To identify between a SOM LV and Torpedo module,
99 * a pulldown resistor is on hsusb0_data5 for the SOM LV module.
100 * Drive the pin (and let it soak), then read it back.
101 * If the pin is still high its a Torpedo. If low its a SOM LV
104 /* Mux hsusb0_data5 as a GPIO */
105 MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M4));
107 if (gpio_request(BOARD_ID_GPIO, "husb0_data5.gpio_189") == 0) {
110 * Drive BOARD_ID_GPIO - the pulldown resistor on the SOM LV
111 * will drain the voltage.
113 gpio_direction_output(BOARD_ID_GPIO, 0);
114 gpio_set_value(BOARD_ID_GPIO, 1);
116 /* Let it soak for a bit */
120 * Read state of BOARD_ID_GPIO as an input and if its set.
121 * If so the board is a Torpedo
123 gpio_direction_input(BOARD_ID_GPIO);
124 val = gpio_get_value(BOARD_ID_GPIO);
125 gpio_free(BOARD_ID_GPIO);
127 board = &boards[!!(get_cpu_family() == CPU_OMAP36XX)][!!val];
128 printf("Board: %s\n", board->name);
130 /* Set the machine_id passed to Linux */
131 gd->bd->bi_arch_number = board->machine_id;
134 /* restore hsusb0_data5 pin as hsusb0_data5 */
135 MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0));
140 #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
141 int board_mmc_init(bd_t *bis)
143 return omap_mmc_init(0);
148 * Routine: misc_init_r
149 * Description: display die ID register
151 int misc_init_r(void)
158 #ifdef CONFIG_SMC911X
159 /* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */
160 static const u32 gpmc_lan92xx_config[] = {
161 NET_LAN92XX_GPMC_CONFIG1,
162 NET_LAN92XX_GPMC_CONFIG2,
163 NET_LAN92XX_GPMC_CONFIG3,
164 NET_LAN92XX_GPMC_CONFIG4,
165 NET_LAN92XX_GPMC_CONFIG5,
166 NET_LAN92XX_GPMC_CONFIG6,
169 int board_eth_init(bd_t *bis)
171 enable_gpmc_cs_config(gpmc_lan92xx_config, &gpmc_cfg->cs[1],
172 CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
174 return smc911x_initialize(0, CONFIG_SMC911X_BASE);
180 * IDIS - Input Disable
181 * PTD - Pull type Down
183 * DIS - Pull type selection is inactive
184 * EN - Pull type selection is active
186 * The commented string gives the final mux configuration for that pin
190 * Routine: set_muxconf_regs
191 * Description: Setting up the configuration Mux registers specific to the
192 * hardware. Many pins need to be moved from protect to primary
195 void set_muxconf_regs(void)
198 MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0));
199 MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0));
200 MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0));
201 MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0));
202 MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0));
203 MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0));
204 MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0));
205 MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0));
206 MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0));
207 MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0));
208 MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0));
209 MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0));
210 MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0));
211 MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0));
212 MUX_VAL(CP(GPMC_NCS3), (IDIS | PTD | DIS | M0));
213 MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M4));
214 MUX_VAL(CP(GPMC_NCS7), (IDIS | PTD | DIS | M1)); /*GPMC_IO_DIR*/
215 MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0));
216 MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0));
219 MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0));
220 MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0));
221 MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0));
222 MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0));
223 MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0));
224 MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0));
227 MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0));
228 MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0));
229 MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0));
230 MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0));
233 MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0));
234 MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0));
235 MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0));
236 MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0));
238 MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0));
240 /*Control and debug */
241 MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0));
242 MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0));
243 MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0));
244 MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0));
245 MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0));
246 MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0));