2 * (C) 2002 Kyle Harris <kharris@nexus-tech.net>, Nexus Technologies, Inc.
3 * (C) 2002 Marius Groeger <mgroeger@sysgo.de>, Sysgo GmbH
4 * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
6 * See file CREDITS for list of people who contributed to this
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 #include <asm/arch/pxa-regs.h>
29 DECLARE_GLOBAL_DATA_PTR;
32 * board_init: - setup some data structures
34 * @return: 0 in case of success
39 /* memory and cpu-speed are setup before relocation */
40 /* so we do _nothing_ here */
42 gd->bd->bi_arch_number = MACH_TYPE_LOGODL;
43 gd->bd->bi_boot_params = 0x08000100;
44 gd->bd->bi_baudrate = CONFIG_BAUDRATE;
46 (*((volatile short*)0x14800000)) = 0xff; /* power on eth0 */
47 (*((volatile short*)0x14000000)) = 0xff; /* power on uart */
54 * dram_init: - setup dynamic RAM
56 * @return: 0 in case of success
61 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
62 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
69 * logodl_set_led: - switch LEDs on or off
71 * @param led: LED to switch (0,1)
72 * @param state: switch on (1) or off (0)
75 void logodl_set_led(int led, int state)
81 CONFIG_SYS_LED_A_CR = CONFIG_SYS_LED_A_BIT;
82 } else if (state==0) {
83 CONFIG_SYS_LED_A_SR = CONFIG_SYS_LED_A_BIT;
89 CONFIG_SYS_LED_B_CR = CONFIG_SYS_LED_B_BIT;
90 } else if (state==0) {
91 CONFIG_SYS_LED_B_SR = CONFIG_SYS_LED_B_BIT;
101 * show_boot_progress: - indicate state of the boot process
103 * @param status: Status number - see README for details.
105 * The LOGOTRONIC does only have 2 LEDs, so we switch them on at the most
106 * important states (1, 5, 15).
109 void show_boot_progress (int status)
111 if (status < -32) status = -1; /* let things compatible */
114 case 1: logodl_set_led(0,1); break;
115 case 5: logodl_set_led(1,1); break;
116 case 15: logodl_set_led(2,1); break;
119 logodl_set_led(0, (status & 1)==1);
120 logodl_set_led(1, (status & 2)==2);
125 #ifdef CONFIG_CMD_NET
126 int board_eth_init(bd_t *bis)
129 #ifdef CONFIG_SMC91111
130 rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);