3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
29 * Memory Controller Using
31 * CS0 - Flash memory (0x40000000)
32 * CS3 - SDRAM (0x00000000}
35 /* ------------------------------------------------------------------------- */
37 #define _not_used_ 0xffffffff
39 const uint sdram_table[] = {
40 /* single read. (offset 0 in upm RAM) */
41 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
44 /* MRS initialization (offset 5) */
46 0x1ff77c34, 0xefeabc34, 0x1fb57c35,
48 /* burst read. (offset 8 in upm RAM) */
49 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
50 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
51 _not_used_, _not_used_, _not_used_, _not_used_,
52 _not_used_, _not_used_, _not_used_, _not_used_,
54 /* single write. (offset 18 in upm RAM) */
55 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
56 _not_used_, _not_used_, _not_used_, _not_used_,
58 /* burst write. (offset 20 in upm RAM) */
59 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
60 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
61 _not_used_, _not_used_, _not_used_, _not_used_,
62 _not_used_, _not_used_, _not_used_, _not_used_,
64 /* refresh. (offset 30 in upm RAM) */
65 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
66 0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
67 _not_used_, _not_used_, _not_used_, _not_used_,
69 /* exception. (offset 3c in upm RAM) */
70 0x7ffffc07, _not_used_, _not_used_, _not_used_
73 const uint nand_flash_table[] = {
74 /* single read. (offset 0 in upm RAM) */
75 0x0ff3fc04, 0x0ff3fc04, 0x0ff3fc04, 0x0ffffc04,
76 0xfffffc00, 0xfffffc05, 0xfffffc05, 0xfffffc05,
78 /* burst read. (offset 8 in upm RAM) */
79 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
80 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
81 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
82 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
84 /* single write. (offset 18 in upm RAM) */
85 0x00fffc04, 0x00fffc04, 0x00fffc04, 0x0ffffc04,
86 0x0ffffc84, 0x0ffffc84, 0xfffffc00, 0xfffffc05,
88 /* burst write. (offset 20 in upm RAM) */
89 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
90 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
91 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
92 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
94 /* refresh. (offset 30 in upm RAM) */
95 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
96 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
97 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
99 /* exception. (offset 3c in upm RAM) */
100 0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05
103 /* ------------------------------------------------------------------------- */
106 * Check Board Identity:
109 int checkboard (void)
111 puts ("Board: NC650\n");
115 /* ------------------------------------------------------------------------- */
117 static long int dram_size (long int, long int *, long int);
119 /* ------------------------------------------------------------------------- */
121 long int initdram (int board_type)
123 volatile immap_t *immap = (immap_t *) CFG_IMMR;
124 volatile memctl8xx_t *memctl = &immap->im_memctl;
125 long int size8, size9;
126 long int size_b0 = 0;
129 upmconfig (UPMA, (uint *) sdram_table,
130 sizeof (sdram_table) / sizeof (uint));
133 * Preliminary prescaler for refresh (depends on number of
134 * banks): This value is selected for four cycles every 62.4 us
135 * with two SDRAM banks or four cycles every 31.2 us with one
136 * bank. It will be adjusted after memory sizing.
138 memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
140 memctl->memc_mar = 0x00000088;
143 * Map controller bank 1 to the SDRAM bank at
144 * preliminary address - these have to be modified after the
145 * SDRAM size has been determined.
147 memctl->memc_or3 = CFG_OR3_PRELIM;
148 memctl->memc_br3 = CFG_BR3_PRELIM;
150 memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
154 /* perform SDRAM initializsation sequence */
156 memctl->memc_mcr = 0x80006105; /* SDRAM bank 0 */
158 memctl->memc_mcr = 0x80006230; /* SDRAM bank 0 - execute twice */
161 memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
166 * Check Bank 0 Memory Size for re-configuration
170 size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE3_PRELIM,
178 size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE3_PRELIM,
187 memctl->memc_mamr = CFG_MAMR_8COL;
192 * Adjust refresh rate depending on SDRAM type, both banks.
193 * For types > 128 MBit leave it at the current (fast) rate
195 if ((size_b0 < 0x02000000)) {
196 /* reduce to 15.6 us (62.4 us / quad) */
197 memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
205 memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
206 memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
208 /* adjust refresh rate depending on SDRAM type, one bank */
209 reg = memctl->memc_mptpr;
210 reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
211 memctl->memc_mptpr = reg;
215 /* Configure UPMB for NAND flash access */
216 upmconfig (UPMB, (uint *) nand_flash_table,
217 sizeof (nand_flash_table) / sizeof (uint));
219 memctl->memc_mbmr = CFG_MBMR_NAND;
224 /* ------------------------------------------------------------------------- */
227 * Check memory range for valid RAM. A simple memory test determines
228 * the actually available RAM size between addresses `base' and
229 * `base + maxsize'. Some (not all) hardware errors are detected:
230 * - short between address lines
231 * - short between data lines
234 static long int dram_size (long int mamr_value, long int *base, long int maxsize)
236 volatile immap_t *immap = (immap_t *) CFG_IMMR;
237 volatile memctl8xx_t *memctl = &immap->im_memctl;
239 memctl->memc_mamr = mamr_value;
241 return (get_ram_size(base, maxsize));
244 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
247 extern unsigned long nand_probe(unsigned long physadr);
249 unsigned long totlen = nand_probe(CFG_NAND_BASE);
251 printf ("%4lu MB\n", totlen >> 20);