4 The SBC produced by Phytec has a SOM based on a i.MX6Q.
5 The SOM is sold in two versions, with eMMC or with NAND. Support
6 here is for the SOM with NAND.
7 The evaluation board "phyBoard-Mira" is thought to be used
10 More information on the board can be found on manufacturer's
13 http://www.phytec.de/produkt/single-board-computer/phyboard-mira/
14 http://www.phytec.de/fileadmin/user_upload/images/content/1.Products/SOMs/phyCORE-i.MX6/L-808e_1.pdf
17 -------------------------------
19 $ make pcm058_defconfig
22 This generates the artifacts SPL and u-boot.img.
23 The SOM can boot from NAND or from SD-Card, having the SPI-NOR
25 The dip switch "DIP-1" on the board let choose between
28 DIP-1 set to off: Boot first from NAND, then try SPI
29 DIP-1 set to on: Boot first from SD, then try SPI
31 The bootloader was tested with DIP-1 set to on. If a SD-card
32 is present, then the RBL tries to load SPL from the SD Card, if not,
33 RBL loads from SPI-NOR. The SPL tries then to load from the same
34 device where SPL was loaded (SD or SPI). Booting from NAND is