2 * Copyright (C) 2012 Samsung Electronics
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 #include <asm/arch/cpu.h>
28 #include <asm/arch/gpio.h>
29 #include <asm/arch/mmc.h>
30 #include <asm/arch/pinmux.h>
31 #include <asm/arch/sromc.h>
34 DECLARE_GLOBAL_DATA_PTR;
37 static int smc9115_pre_init(void)
39 u32 smc_bw_conf, smc_bc_conf;
42 /* Ethernet needs data bus width of 16 bits */
43 smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK)
44 | SROMC_BYTE_ENABLE(CONFIG_ENV_SROM_BANK);
46 smc_bc_conf = SROMC_BC_TACS(0x01) | SROMC_BC_TCOS(0x01)
47 | SROMC_BC_TACC(0x06) | SROMC_BC_TCOH(0x01)
48 | SROMC_BC_TAH(0x0C) | SROMC_BC_TACP(0x09)
51 /* Select and configure the SROMC bank */
52 err = exynos_pinmux_config(PERIPH_ID_SROMC,
53 CONFIG_ENV_SROM_BANK | PINMUX_FLAG_16BIT);
55 debug("SROMC not configured\n");
59 s5p_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf);
66 gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
67 #if defined(CONFIG_PMIC)
75 gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
76 + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
77 + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
78 + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)
79 + get_ram_size((long *)PHYS_SDRAM_5, PHYS_SDRAM_7_SIZE)
80 + get_ram_size((long *)PHYS_SDRAM_6, PHYS_SDRAM_7_SIZE)
81 + get_ram_size((long *)PHYS_SDRAM_7, PHYS_SDRAM_7_SIZE)
82 + get_ram_size((long *)PHYS_SDRAM_8, PHYS_SDRAM_8_SIZE);
86 void dram_init_banksize(void)
88 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
89 gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
91 gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
92 gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
94 gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
95 gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3,
97 gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
98 gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4,
100 gd->bd->bi_dram[4].start = PHYS_SDRAM_5;
101 gd->bd->bi_dram[4].size = get_ram_size((long *)PHYS_SDRAM_5,
103 gd->bd->bi_dram[5].start = PHYS_SDRAM_6;
104 gd->bd->bi_dram[5].size = get_ram_size((long *)PHYS_SDRAM_6,
106 gd->bd->bi_dram[6].start = PHYS_SDRAM_7;
107 gd->bd->bi_dram[6].size = get_ram_size((long *)PHYS_SDRAM_7,
109 gd->bd->bi_dram[7].start = PHYS_SDRAM_8;
110 gd->bd->bi_dram[7].size = get_ram_size((long *)PHYS_SDRAM_8,
114 int board_eth_init(bd_t *bis)
116 #ifdef CONFIG_SMC911X
117 if (smc9115_pre_init())
119 return smc911x_initialize(0, CONFIG_SMC911X_BASE);
124 #ifdef CONFIG_DISPLAY_BOARDINFO
127 printf("\nBoard: SMDK5250\n");
133 #ifdef CONFIG_GENERIC_MMC
134 int board_mmc_init(bd_t *bis)
138 err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
140 debug("SDMMC0 not configured\n");
144 err = s5p_mmc_init(0, 8);
149 static int board_uart_init(void)
153 err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
155 debug("UART0 not configured\n");
159 err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
161 debug("UART1 not configured\n");
165 err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
167 debug("UART2 not configured\n");
171 err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
173 debug("UART3 not configured\n");
180 #ifdef CONFIG_SYS_I2C_INIT_BOARD
181 static int board_i2c_init(void)
185 for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
186 err = exynos_pinmux_config((PERIPH_ID_I2C0 + i),
189 debug("I2C%d not configured\n", (PERIPH_ID_I2C0 + i));
193 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
198 #ifdef CONFIG_BOARD_EARLY_INIT_F
199 int board_early_init_f(void)
202 err = board_uart_init();
204 debug("UART init failed\n");
207 #ifdef CONFIG_SYS_I2C_INIT_BOARD
208 err = board_i2c_init();