2 * Copyright 2007,2009 Wind River Systems, Inc. <www.windriver.com>
4 * Copyright 2007 Embedded Specialties, Inc.
6 * Copyright 2004, 2007 Freescale Semiconductor.
8 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
10 * See file CREDITS for list of people who contributed to this
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation; either version 2 of
16 * the License, or (at your option) any later version.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
31 #include <asm/processor.h>
32 #include <asm/immap_85xx.h>
33 #include <asm/fsl_pci.h>
34 #include <asm/fsl_ddr_sdram.h>
35 #include <asm/fsl_serdes.h>
36 #include <spd_sdram.h>
41 #include <fdt_support.h>
43 DECLARE_GLOBAL_DATA_PTR;
45 void local_bus_init(void);
47 int board_early_init_f (void)
54 volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
55 volatile u_char *rev= (void *)CONFIG_SYS_BD_REV;
57 printf ("Board: Wind River SBC8548 Rev. 0x%01x\n",
61 * Initialize local bus.
65 out_be32(&ecm->eedr, 0xffffffff); /* clear ecm errors */
66 out_be32(&ecm->eeer, 0xffffffff); /* enable ecm errors */
71 * Initialize Local Bus
76 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
77 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
79 uint clkdiv, lbc_mhz, lcrr = CONFIG_SYS_LBC_LCRR;
82 get_sys_info(&sysinfo);
84 lbc_mhz = sysinfo.freqLocalBus / 1000000;
85 clkdiv = sysinfo.freqSystemBus / sysinfo.freqLocalBus;
87 debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz);
89 out_be32(&gur->lbiuiplldcr1, 0x00078080);
91 out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
92 } else if (clkdiv == 8) {
93 out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
94 } else if (clkdiv == 4) {
95 out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);
99 * Local Bus Clock > 83.3 MHz. According to timing
100 * specifications set LCRR[EADC] to 2 delay cycles.
108 * According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30
109 * disable PLL bypass for Local Bus Clock > 83 MHz.
112 lcrr &= (~LCRR_DBYP); /* DLL Enabled */
115 lcrr |= LCRR_DBYP; /* DLL Bypass */
117 out_be32(&lbc->lcrr, lcrr);
118 asm("sync;isync;msync");
121 * According to MPC8548ERMAD Rev.1.3 read back LCRR
122 * and terminate with isync
124 lcrr = in_be32(&lbc->lcrr);
127 /* let DLL stabilize */
130 out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */
131 out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */
135 * Initialize SDRAM memory on the Local Bus.
137 void lbc_sdram_init(void)
139 #if defined(CONFIG_SYS_LBC_SDRAM_SIZE)
142 const unsigned long size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
143 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
144 uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
145 uint *sdram_addr2 = (uint *)(CONFIG_SYS_LBC_SDRAM_BASE + size/2);
149 print_size(size, "\n");
152 * Setup SDRAM Base and Option Registers
154 set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
155 set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
156 set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
157 set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);
159 out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
162 out_be32(&lbc->lsrt, CONFIG_SYS_LBC_LSRT);
163 out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
167 * Issue PRECHARGE ALL command.
169 out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_PCHALL);
172 ppcDcbf((unsigned long) sdram_addr);
174 ppcDcbf((unsigned long) sdram_addr2);
178 * Issue 8 AUTO REFRESH commands.
180 for (idx = 0; idx < 8; idx++) {
181 out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_ARFRSH);
184 ppcDcbf((unsigned long) sdram_addr);
186 ppcDcbf((unsigned long) sdram_addr2);
191 * Issue 8 MODE-set command.
193 out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_MRW);
196 ppcDcbf((unsigned long) sdram_addr);
198 ppcDcbf((unsigned long) sdram_addr2);
202 * Issue RFEN command.
204 out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_RFEN);
207 ppcDcbf((unsigned long) sdram_addr);
209 ppcDcbf((unsigned long) sdram_addr2);
210 udelay(200); /* Overkill. Must wait > 200 bus cycles */
212 #endif /* enable SDRAM init */
215 #if defined(CONFIG_SYS_DRAM_TEST)
219 uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
220 uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
223 printf("Testing DRAM from 0x%08x to 0x%08x\n",
224 CONFIG_SYS_MEMTEST_START,
225 CONFIG_SYS_MEMTEST_END);
227 printf("DRAM test phase 1:\n");
228 for (p = pstart; p < pend; p++)
231 for (p = pstart; p < pend; p++) {
232 if (*p != 0xaaaaaaaa) {
233 printf ("DRAM test fails at: %08x\n", (uint) p);
238 printf("DRAM test phase 2:\n");
239 for (p = pstart; p < pend; p++)
242 for (p = pstart; p < pend; p++) {
243 if (*p != 0x55555555) {
244 printf ("DRAM test fails at: %08x\n", (uint) p);
249 printf("DRAM test passed.\n");
255 static struct pci_controller pci1_hose;
256 #endif /* CONFIG_PCI1 */
262 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
263 int first_free_busno = 0;
266 struct fsl_pci_info pci_info;
267 u32 devdisr = in_be32(&gur->devdisr);
268 u32 pordevsr = in_be32(&gur->pordevsr);
269 u32 porpllsr = in_be32(&gur->porpllsr);
271 if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
272 uint pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
273 uint pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
274 uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
275 uint pci_speed = CONFIG_SYS_CLK_FREQ; /* get_clock_freq() */
277 printf("PCI: Host, %d bit, %s MHz, %s, %s\n",
279 (pci_speed == 33000000) ? "33" :
280 (pci_speed == 66000000) ? "66" : "unknown",
281 pci_clk_sel ? "sync" : "async",
282 pci_arb ? "arbiter" : "external-arbiter");
284 SET_STD_PCI_INFO(pci_info, 1);
285 set_next_law(pci_info.mem_phys,
286 law_size_bits(pci_info.mem_size), pci_info.law);
287 set_next_law(pci_info.io_phys,
288 law_size_bits(pci_info.io_size), pci_info.law);
290 first_free_busno = fsl_pci_init_port(&pci_info,
291 &pci1_hose, first_free_busno);
293 printf("PCI: disabled\n");
298 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
301 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable PCI2 */
303 fsl_pcie_init_board(first_free_busno);
307 int board_eth_init(bd_t *bis)
309 tsec_standard_init(bis);
311 return 0; /* otherwise cpu_eth_init gets run */
314 int last_stage_init(void)
319 #if defined(CONFIG_OF_BOARD_SETUP)
320 void ft_board_setup(void *blob, bd_t *bd)
322 ft_cpu_setup(blob, bd);
324 #ifdef CONFIG_FSL_PCI_INIT