3 * STMicrolelctronics, <www.st.com>
7 * Philippe Robin, <philippe.robin@arm.com>
9 * See file CREDITS for list of people who contributed to this
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
31 #include <asm/arch/gpio.h>
33 DECLARE_GLOBAL_DATA_PTR;
35 #ifdef CONFIG_SHOW_BOOT_PROGRESS
36 void show_boot_progress(int progress)
38 printf("%i\n", progress);
43 * Miscellaneous platform dependent initialisations
47 gd->bd->bi_arch_number = MACH_TYPE_NOMADIK;
48 gd->bd->bi_boot_params = 0x00000100;
49 writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
50 writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
51 writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
52 writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
54 /* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
55 writel(0x0000305b, REG_FSMC_BCR1);
56 writel(0x00033f33, REG_FSMC_BTR1);
58 /* Set up SMCS0 for OneNand: sram-like once again */
59 writel(0x000030db, NOMADIK_FSMC_BASE + 0x00); /* FSMC_BCR0 */
60 writel(0x02100551, NOMADIK_FSMC_BASE + 0x04); /* FSMC_BTR0 */
66 int board_late_init(void)
68 /* Set the two I2C gpio lines to be gpio high */
69 nmk_gpio_set(__SCL, 1); nmk_gpio_set(__SDA, 1);
70 nmk_gpio_dir(__SCL, 1); nmk_gpio_dir(__SDA, 1);
71 nmk_gpio_af(__SCL, GPIO_GPIO); nmk_gpio_af(__SDA, GPIO_GPIO);
73 /* Reset the I2C port expander, on GPIO77 */
74 nmk_gpio_af(77, GPIO_GPIO);
85 /* set dram bank start addr and size */
86 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
87 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
89 gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
90 gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
95 int board_eth_init(bd_t *bis)
98 #ifdef CONFIG_SMC91111
99 rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);