2 * U-boot - stamp.c STAMP board specific routines
4 * Copyright (c) 2005 blackfin.uclinux.org
6 * (C) Copyright 2000-2004
7 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
9 * See file CREDITS for list of people who contributed to this
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
29 #include <asm/mem_init.h>
32 #define STATUS_LED_OFF 0
33 #define STATUS_LED_ON 1
35 #ifdef CONFIG_SHOW_BOOT_PROGRESS
36 # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
38 # define SHOW_BOOT_PROGRESS(arg)
43 printf ("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
44 printf ("Board: ADI BF533 Stamp board\n");
45 printf (" Support: http://blackfin.uclinux.org/\n");
46 printf (" Richard Klingler <richard@uclinux.net>\n");
50 long int initdram (int board_type)
52 DECLARE_GLOBAL_DATA_PTR;
54 printf ("SDRAM attributes:\n");
55 printf (" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "
56 "CAS Latency:%d cycles\n",
62 printf ("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
63 printf ("Bank size = %d MB\n", 128);
65 gd->bd->bi_memstart = CFG_SDRAM_BASE;
66 gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
67 return (gd->bd->bi_memsize);
70 void swap_to (int device_id)
73 if (device_id == ETHERNET) {
78 } else if (device_id == FLASH) {
79 *pFIO_DIR = (PF4 | PF3 | PF2 | PF1 | PF0);
80 *pFIO_FLAG_S = (PF4 | PF3 | PF2);
81 *pFIO_MASKA_D = (PF8 | PF6 | PF5);
82 *pFIO_MASKB_D = (PF7);
83 *pFIO_POLAR = (PF8 | PF6 | PF5);
84 *pFIO_EDGE = (PF8 | PF7 | PF6 | PF5);
85 *pFIO_INEN = (PF8 | PF7 | PF6 | PF5);
86 *pFIO_FLAG_D = (PF4 | PF3 | PF2);
89 printf ("Unknown bank to switch\n");
95 #if defined(CONFIG_MISC_INIT_R)
96 /* miscellaneous platform dependent initialisations */
97 int misc_init_r (void)
102 /* Check whether CF card is inserted */
103 *pFIO_EDGE = FIO_EDGE_CF_BITS;
104 *pFIO_POLAR = FIO_POLAR_CF_BITS;
105 for (i = 0; i < 0x300; i++)
108 if ((*pFIO_FLAG_S) & CF_STAT_BITS) {
114 *pFIO_EDGE = FIO_EDGE_BITS;
115 *pFIO_POLAR = FIO_POLAR_BITS;
119 printf ("Booting from COMPACT flash\n");
121 /* Set cycle time for CF */
122 *(volatile unsigned long *) ambctl1 = CF_AMBCTL1VAL;
124 for (i = 0; i < 0x1000; i++)
126 for (i = 0; i < 0x1000; i++)
128 for (i = 0; i < 0x1000; i++)
134 setenv ("bootargs", "");
136 "fatload ide 0:1 0x1000000 uImage-stamp;bootm 0x1000000;bootm 0x20100000");
138 printf ("Booting from FLASH\n");
145 #ifdef CONFIG_STAMP_CF
147 void cf_outb (unsigned char val, volatile unsigned char *addr)
150 * Set PF1 PF0 respectively to 0 1 to divert address
151 * to the expansion memory banks
153 *pFIO_FLAG_S = CF_PF0;
154 *pFIO_FLAG_C = CF_PF1;
160 /* Setback PF1 PF0 to 0 0 to address external
162 *(volatile unsigned short *) pFIO_FLAG_C = CF_PF1_PF0;
166 unsigned char cf_inb (volatile unsigned char *addr)
168 volatile unsigned char c;
170 *pFIO_FLAG_S = CF_PF0;
171 *pFIO_FLAG_C = CF_PF1;
177 *pFIO_FLAG_C = CF_PF1_PF0;
183 void cf_insw (unsigned short *sect_buf, unsigned short *addr, int words)
187 *pFIO_FLAG_S = CF_PF0;
188 *pFIO_FLAG_C = CF_PF1;
191 for (i = 0; i < words; i++) {
192 *(sect_buf + i) = *(addr);
196 *pFIO_FLAG_C = CF_PF1_PF0;
200 void cf_outsw (unsigned short *addr, unsigned short *sect_buf, int words)
204 *pFIO_FLAG_S = CF_PF0;
205 *pFIO_FLAG_C = CF_PF1;
208 for (i = 0; i < words; i++) {
209 *(addr) = *(sect_buf + i);
213 *pFIO_FLAG_C = CF_PF1_PF0;
218 void stamp_led_set (int LED1, int LED2, int LED3)
220 *pFIO_INEN &= ~(PF2 | PF3 | PF4);
221 *pFIO_DIR |= (PF2 | PF3 | PF4);
223 if (LED1 == STATUS_LED_OFF)
227 if (LED2 == STATUS_LED_OFF)
231 if (LED3 == STATUS_LED_OFF)
238 void show_boot_progress (int status)
242 stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON);
245 stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF);
248 stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON);
251 stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF);
255 stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON);
259 stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF);
268 stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF,
272 stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_ON);