git.sur5r.net Git - u-boot/blob - board/xilinx/zynqmp/zynqmp.c

   1 /*
   2  * (C) Copyright 2014 - 2015 Xilinx, Inc.
   3  * Michal Simek <michal.simek@xilinx.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #include <common.h>
   9 #include <sata.h>
  10 #include <ahci.h>
  11 #include <scsi.h>
  12 #include <malloc.h>
  13 #include <asm/arch/clk.h>
  14 #include <asm/arch/hardware.h>
  15 #include <asm/arch/sys_proto.h>
  16 #include <asm/io.h>
  17 #include <usb.h>
  18 #include <dwc3-uboot.h>
  19 #include <zynqmppl.h>
  20 #include <i2c.h>
  21 #include <g_dnl.h>
  22
  23 DECLARE_GLOBAL_DATA_PTR;
  24
  25 #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
  26     !defined(CONFIG_SPL_BUILD)
  27 static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC;
  28
  29 static const struct {
  30         uint32_t id;
  31         char *name;
  32 } zynqmp_devices[] = {
  33         {
  34                 .id = 0x10,
  35                 .name = "3eg",
  36         },
  37         {
  38                 .id = 0x11,
  39                 .name = "2eg",
  40         },
  41         {
  42                 .id = 0x20,
  43                 .name = "5ev",
  44         },
  45         {
  46                 .id = 0x21,
  47                 .name = "4ev",
  48         },
  49         {
  50                 .id = 0x30,
  51                 .name = "7ev",
  52         },
  53         {
  54                 .id = 0x38,
  55                 .name = "9eg",
  56         },
  57         {
  58                 .id = 0x39,
  59                 .name = "6eg",
  60         },
  61         {
  62                 .id = 0x40,
  63                 .name = "11eg",
  64         },
  65         {
  66                 .id = 0x50,
  67                 .name = "15eg",
  68         },
  69         {
  70                 .id = 0x58,
  71                 .name = "19eg",
  72         },
  73         {
  74                 .id = 0x59,
  75                 .name = "17eg",
  76         },
  77 };
  78 #endif
  79
  80 int chip_id(unsigned char id)
  81 {
  82         struct pt_regs regs;
  83         int val = -EINVAL;
  84
  85         if (current_el() != 3) {
  86                 regs.regs[0] = ZYNQMP_SIP_SVC_CSU_DMA_CHIPID;
  87                 regs.regs[1] = 0;
  88                 regs.regs[2] = 0;
  89                 regs.regs[3] = 0;
  90
  91                 smc_call(&regs);
  92
  93                 /*
  94                  * SMC returns:
  95                  * regs[0][31:0]  = status of the operation
  96                  * regs[0][63:32] = CSU.IDCODE register
  97                  * regs[1][31:0]  = CSU.version register
  98                  */
  99                 switch (id) {
 100                 case IDCODE:
 101                         regs.regs[0] = upper_32_bits(regs.regs[0]);
 102                         regs.regs[0] &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
 103                                         ZYNQMP_CSU_IDCODE_SVD_MASK;
 104                         regs.regs[0] >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
 105                         val = regs.regs[0];
 106                         break;
 107                 case VERSION:
 108                         regs.regs[1] = lower_32_bits(regs.regs[1]);
 109                         regs.regs[1] &= ZYNQMP_CSU_SILICON_VER_MASK;
 110                         val = regs.regs[1];
 111                         break;
 112                 default:
 113                         printf("%s, Invalid Req:0x%x\n", __func__, id);
 114                 }
 115         } else {
 116                 switch (id) {
 117                 case IDCODE:
 118                         val = readl(ZYNQMP_CSU_IDCODE_ADDR);
 119                         val &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
 120                                ZYNQMP_CSU_IDCODE_SVD_MASK;
 121                         val >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
 122                         break;
 123                 case VERSION:
 124                         val = readl(ZYNQMP_CSU_VER_ADDR);
 125                         val &= ZYNQMP_CSU_SILICON_VER_MASK;
 126                         break;
 127                 default:
 128                         printf("%s, Invalid Req:0x%x\n", __func__, id);
 129                 }
 130         }
 131
 132         return val;
 133 }
 134
 135 #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
 136         !defined(CONFIG_SPL_BUILD)
 137 static char *zynqmp_get_silicon_idcode_name(void)
 138 {
 139         uint32_t i, id;
 140
 141         id = chip_id(IDCODE);
 142         for (i = 0; i < ARRAY_SIZE(zynqmp_devices); i++) {
 143                 if (zynqmp_devices[i].id == id)
 144                         return zynqmp_devices[i].name;
 145         }
 146         return "unknown";
 147 }
 148 #endif
 149
 150 int board_early_init_f(void)
 151 {
 152 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_CLK_ZYNQMP)
 153         zynqmp_pmufw_version();
 154 #endif
 155
 156 #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED)
 157         psu_init();
 158 #endif
 159
 160         return 0;
 161 }
 162
 163 #define ZYNQMP_VERSION_SIZE     9
 164
 165 int board_init(void)
 166 {
 167         printf("EL Level:\tEL%d\n", current_el());
 168
 169 #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
 170     !defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \
 171     defined(CONFIG_SPL_BUILD))
 172         if (current_el() != 3) {
 173                 static char version[ZYNQMP_VERSION_SIZE];
 174
 175                 strncat(version, "xczu", ZYNQMP_VERSION_SIZE);
 176                 zynqmppl.name = strncat(version,
 177                                         zynqmp_get_silicon_idcode_name(),
 178                                         ZYNQMP_VERSION_SIZE);
 179                 printf("Chip ID:\t%s\n", zynqmppl.name);
 180                 fpga_init();
 181                 fpga_add(fpga_xilinx, &zynqmppl);
 182         }
 183 #endif
 184
 185         return 0;
 186 }
 187
 188 int board_early_init_r(void)
 189 {
 190         u32 val;
 191
 192         val = readl(&crlapb_base->timestamp_ref_ctrl);
 193         val &= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
 194
 195         if (current_el() == 3 && !val) {
 196                 val = readl(&crlapb_base->timestamp_ref_ctrl);
 197                 val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
 198                 writel(val, &crlapb_base->timestamp_ref_ctrl);
 199
 200                 /* Program freq register in System counter */
 201                 writel(zynqmp_get_system_timer_freq(),
 202                        &iou_scntr_secure->base_frequency_id_register);
 203                 /* And enable system counter */
 204                 writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN,
 205                        &iou_scntr_secure->counter_control_register);
 206         }
 207         return 0;
 208 }
 209
 210 int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
 211 {
 212 #if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \
 213     defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET) && \
 214     defined(CONFIG_ZYNQ_EEPROM_BUS)
 215         i2c_set_bus_num(CONFIG_ZYNQ_EEPROM_BUS);
 216
 217         if (eeprom_read(CONFIG_ZYNQ_GEM_EEPROM_ADDR,
 218                         CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET,
 219                         ethaddr, 6))
 220                 printf("I2C EEPROM MAC address read failed\n");
 221 #endif
 222
 223         return 0;
 224 }
 225
 226 #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
 227 int dram_init_banksize(void)
 228 {
 229         fdtdec_setup_memory_banksize();
 230
 231         return 0;
 232 }
 233
 234 int dram_init(void)
 235 {
 236         if (fdtdec_setup_memory_size() != 0)
 237                 return -EINVAL;
 238
 239         return 0;
 240 }
 241 #else
 242 int dram_init(void)
 243 {
 244         gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
 245
 246         return 0;
 247 }
 248 #endif
 249
 250 void reset_cpu(ulong addr)
 251 {
 252 }
 253
 254 int board_late_init(void)
 255 {
 256         u32 reg = 0;
 257         u8 bootmode;
 258         const char *mode;
 259         char *new_targets;
 260
 261         if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
 262                 debug("Saved variables - Skipping\n");
 263                 return 0;
 264         }
 265
 266         reg = readl(&crlapb_base->boot_mode);
 267         if (reg >> BOOT_MODE_ALT_SHIFT)
 268                 reg >>= BOOT_MODE_ALT_SHIFT;
 269
 270         bootmode = reg & BOOT_MODES_MASK;
 271
 272         puts("Bootmode: ");
 273         switch (bootmode) {
 274         case USB_MODE:
 275                 puts("USB_MODE\n");
 276                 mode = "usb";
 277                 break;
 278         case JTAG_MODE:
 279                 puts("JTAG_MODE\n");
 280                 mode = "pxe dhcp";
 281                 break;
 282         case QSPI_MODE_24BIT:
 283         case QSPI_MODE_32BIT:
 284                 mode = "qspi0";
 285                 puts("QSPI_MODE\n");
 286                 break;
 287         case EMMC_MODE:
 288                 puts("EMMC_MODE\n");
 289                 mode = "mmc0";
 290                 break;
 291         case SD_MODE:
 292                 puts("SD_MODE\n");
 293                 mode = "mmc0";
 294                 break;
 295         case SD1_LSHFT_MODE:
 296                 puts("LVL_SHFT_");
 297                 /* fall through */
 298         case SD_MODE1:
 299                 puts("SD_MODE1\n");
 300 #if defined(CONFIG_ZYNQ_SDHCI0) && defined(CONFIG_ZYNQ_SDHCI1)
 301                 mode = "mmc1";
 302 #else
 303                 mode = "mmc0";
 304 #endif
 305                 break;
 306         case NAND_MODE:
 307                 puts("NAND_MODE\n");
 308                 mode = "nand0";
 309                 break;
 310         default:
 311                 mode = "";
 312                 printf("Invalid Boot Mode:0x%x\n", bootmode);
 313                 break;
 314         }
 315
 316         /*
 317          * One terminating char + one byte for space between mode
 318          * and default boot_targets
 319          */
 320         new_targets = calloc(1, strlen(mode) +
 321                                 strlen(getenv("boot_targets")) + 2);
 322
 323         sprintf(new_targets, "%s %s", mode, getenv("boot_targets"));
 324         setenv("boot_targets", new_targets);
 325
 326         return 0;
 327 }
 328
 329 int checkboard(void)
 330 {
 331         puts("Board: Xilinx ZynqMP\n");
 332         return 0;
 333 }
 334
 335 #ifdef CONFIG_USB_DWC3
 336 static struct dwc3_device dwc3_device_data0 = {
 337         .maximum_speed = USB_SPEED_HIGH,
 338         .base = ZYNQMP_USB0_XHCI_BASEADDR,
 339         .dr_mode = USB_DR_MODE_PERIPHERAL,
 340         .index = 0,
 341 };
 342
 343 static struct dwc3_device dwc3_device_data1 = {
 344         .maximum_speed = USB_SPEED_HIGH,
 345         .base = ZYNQMP_USB1_XHCI_BASEADDR,
 346         .dr_mode = USB_DR_MODE_PERIPHERAL,
 347         .index = 1,
 348 };
 349
 350 int usb_gadget_handle_interrupts(int index)
 351 {
 352         dwc3_uboot_handle_interrupt(index);
 353         return 0;
 354 }
 355
 356 int board_usb_init(int index, enum usb_init_type init)
 357 {
 358         debug("%s: index %x\n", __func__, index);
 359
 360 #if defined(CONFIG_USB_GADGET_DOWNLOAD)
 361         g_dnl_set_serialnumber(CONFIG_SYS_CONFIG_NAME);
 362 #endif
 363
 364         switch (index) {
 365         case 0:
 366                 return dwc3_uboot_init(&dwc3_device_data0);
 367         case 1:
 368                 return dwc3_uboot_init(&dwc3_device_data1);
 369         };
 370
 371         return -1;
 372 }
 373
 374 int board_usb_cleanup(int index, enum usb_init_type init)
 375 {
 376         dwc3_uboot_exit(index);
 377         return 0;
 378 }
 379 #endif