git.sur5r.net Git - u-boot/blob - board/xilinx/zynqmp/zynqmp.c

   1 /*
   2  * (C) Copyright 2014 - 2015 Xilinx, Inc.
   3  * Michal Simek <michal.simek@xilinx.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #include <common.h>
   9 #include <sata.h>
  10 #include <ahci.h>
  11 #include <scsi.h>
  12 #include <malloc.h>
  13 #include <asm/arch/clk.h>
  14 #include <asm/arch/hardware.h>
  15 #include <asm/arch/sys_proto.h>
  16 #include <asm/io.h>
  17 #include <usb.h>
  18 #include <dwc3-uboot.h>
  19 #include <i2c.h>
  20
  21 DECLARE_GLOBAL_DATA_PTR;
  22
  23 int board_init(void)
  24 {
  25         printf("EL Level:\tEL%d\n", current_el());
  26
  27         return 0;
  28 }
  29
  30 int board_early_init_r(void)
  31 {
  32         u32 val;
  33
  34         if (current_el() == 3) {
  35                 val = readl(&crlapb_base->timestamp_ref_ctrl);
  36                 val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
  37                 writel(val, &crlapb_base->timestamp_ref_ctrl);
  38
  39                 /* Program freq register in System counter */
  40                 writel(zynqmp_get_system_timer_freq(),
  41                        &iou_scntr_secure->base_frequency_id_register);
  42                 /* And enable system counter */
  43                 writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN,
  44                        &iou_scntr_secure->counter_control_register);
  45         }
  46         /* Program freq register in System counter and enable system counter */
  47         writel(gd->cpu_clk, &iou_scntr->base_frequency_id_register);
  48         writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_HDBG |
  49                ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN,
  50                &iou_scntr->counter_control_register);
  51
  52         return 0;
  53 }
  54
  55 int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
  56 {
  57 #if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \
  58     defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET) && \
  59     defined(CONFIG_ZYNQ_EEPROM_BUS)
  60         i2c_set_bus_num(CONFIG_ZYNQ_EEPROM_BUS);
  61
  62         if (eeprom_read(CONFIG_ZYNQ_GEM_EEPROM_ADDR,
  63                         CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET,
  64                         ethaddr, 6))
  65                 printf("I2C EEPROM MAC address read failed\n");
  66 #endif
  67
  68         return 0;
  69 }
  70
  71 #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
  72 /*
  73  * fdt_get_reg - Fill buffer by information from DT
  74  */
  75 static phys_size_t fdt_get_reg(const void *fdt, int nodeoffset, void *buf,
  76                                const u32 *cell, int n)
  77 {
  78         int i = 0, b, banks;
  79         int parent_offset = fdt_parent_offset(fdt, nodeoffset);
  80         int address_cells = fdt_address_cells(fdt, parent_offset);
  81         int size_cells = fdt_size_cells(fdt, parent_offset);
  82         char *p = buf;
  83         u64 val;
  84         u64 vals;
  85
  86         debug("%s: addr_cells=%x, size_cell=%x, buf=%p, cell=%p\n",
  87               __func__, address_cells, size_cells, buf, cell);
  88
  89         /* Check memory bank setup */
  90         banks = n % (address_cells + size_cells);
  91         if (banks)
  92                 panic("Incorrect memory setup cells=%d, ac=%d, sc=%d\n",
  93                       n, address_cells, size_cells);
  94
  95         banks = n / (address_cells + size_cells);
  96
  97         for (b = 0; b < banks; b++) {
  98                 debug("%s: Bank #%d:\n", __func__, b);
  99                 if (address_cells == 2) {
 100                         val = cell[i + 1];
 101                         val <<= 32;
 102                         val |= cell[i];
 103                         val = fdt64_to_cpu(val);
 104                         debug("%s: addr64=%llx, ptr=%p, cell=%p\n",
 105                               __func__, val, p, &cell[i]);
 106                         *(phys_addr_t *)p = val;
 107                 } else {
 108                         debug("%s: addr32=%x, ptr=%p\n",
 109                               __func__, fdt32_to_cpu(cell[i]), p);
 110                         *(phys_addr_t *)p = fdt32_to_cpu(cell[i]);
 111                 }
 112                 p += sizeof(phys_addr_t);
 113                 i += address_cells;
 114
 115                 debug("%s: pa=%p, i=%x, size=%zu\n", __func__, p, i,
 116                       sizeof(phys_addr_t));
 117
 118                 if (size_cells == 2) {
 119                         vals = cell[i + 1];
 120                         vals <<= 32;
 121                         vals |= cell[i];
 122                         vals = fdt64_to_cpu(vals);
 123
 124                         debug("%s: size64=%llx, ptr=%p, cell=%p\n",
 125                               __func__, vals, p, &cell[i]);
 126                         *(phys_size_t *)p = vals;
 127                 } else {
 128                         debug("%s: size32=%x, ptr=%p\n",
 129                               __func__, fdt32_to_cpu(cell[i]), p);
 130                         *(phys_size_t *)p = fdt32_to_cpu(cell[i]);
 131                 }
 132                 p += sizeof(phys_size_t);
 133                 i += size_cells;
 134
 135                 debug("%s: ps=%p, i=%x, size=%zu\n",
 136                       __func__, p, i, sizeof(phys_size_t));
 137         }
 138
 139         /* Return the first address size */
 140         return *(phys_size_t *)((char *)buf + sizeof(phys_addr_t));
 141 }
 142
 143 #define FDT_REG_SIZE  sizeof(u32)
 144 /* Temp location for sharing data for storing */
 145 /* Up to 64-bit address + 64-bit size */
 146 static u8 tmp[CONFIG_NR_DRAM_BANKS * 16];
 147
 148 void dram_init_banksize(void)
 149 {
 150         int bank;
 151
 152         memcpy(&gd->bd->bi_dram[0], &tmp, sizeof(tmp));
 153
 154         for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
 155                 debug("Bank #%d: start %llx\n", bank,
 156                       (unsigned long long)gd->bd->bi_dram[bank].start);
 157                 debug("Bank #%d: size %llx\n", bank,
 158                       (unsigned long long)gd->bd->bi_dram[bank].size);
 159         }
 160 }
 161
 162 int dram_init(void)
 163 {
 164         int node, len;
 165         const void *blob = gd->fdt_blob;
 166         const u32 *cell;
 167
 168         memset(&tmp, 0, sizeof(tmp));
 169
 170         /* find or create "/memory" node. */
 171         node = fdt_subnode_offset(blob, 0, "memory");
 172         if (node < 0) {
 173                 printf("%s: Can't get memory node\n", __func__);
 174                 return node;
 175         }
 176
 177         /* Get pointer to cells and lenght of it */
 178         cell = fdt_getprop(blob, node, "reg", &len);
 179         if (!cell) {
 180                 printf("%s: Can't get reg property\n", __func__);
 181                 return -1;
 182         }
 183
 184         gd->ram_size = fdt_get_reg(blob, node, &tmp, cell, len / FDT_REG_SIZE);
 185
 186         debug("%s: Initial DRAM size %llx\n", __func__, (u64)gd->ram_size);
 187
 188         return 0;
 189 }
 190 #else
 191 int dram_init(void)
 192 {
 193         gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
 194
 195         return 0;
 196 }
 197 #endif
 198
 199 void reset_cpu(ulong addr)
 200 {
 201 }
 202
 203 #ifdef CONFIG_SCSI_AHCI_PLAT
 204 void scsi_init(void)
 205 {
 206 #if defined(CONFIG_SATA_CEVA)
 207         init_sata(0);
 208 #endif
 209         ahci_init((void __iomem *)ZYNQMP_SATA_BASEADDR);
 210         scsi_scan(1);
 211 }
 212 #endif
 213
 214 int board_late_init(void)
 215 {
 216         u32 reg = 0;
 217         u8 bootmode;
 218         const char *mode;
 219         char *new_targets;
 220
 221         if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
 222                 debug("Saved variables - Skipping\n");
 223                 return 0;
 224         }
 225
 226         reg = readl(&crlapb_base->boot_mode);
 227         bootmode = reg & BOOT_MODES_MASK;
 228
 229         puts("Bootmode: ");
 230         switch (bootmode) {
 231         case JTAG_MODE:
 232                 puts("JTAG_MODE\n");
 233                 mode = "pxe dhcp";
 234                 break;
 235         case QSPI_MODE_24BIT:
 236         case QSPI_MODE_32BIT:
 237                 mode = "qspi0";
 238                 puts("QSPI_MODE\n");
 239                 break;
 240         case EMMC_MODE:
 241                 puts("EMMC_MODE\n");
 242                 mode = "mmc0";
 243                 break;
 244         case SD_MODE:
 245                 puts("SD_MODE\n");
 246                 mode = "mmc0";
 247                 break;
 248         case SD_MODE1:
 249                 puts("SD_MODE1\n");
 250 #if defined(CONFIG_ZYNQ_SDHCI0) && defined(CONFIG_ZYNQ_SDHCI1)
 251                 mode = "mmc1";
 252 #else
 253                 mode = "mmc0";
 254 #endif
 255                 break;
 256         case NAND_MODE:
 257                 puts("NAND_MODE\n");
 258                 mode = "nand0";
 259                 break;
 260         default:
 261                 mode = "";
 262                 printf("Invalid Boot Mode:0x%x\n", bootmode);
 263                 break;
 264         }
 265
 266         /*
 267          * One terminating char + one byte for space between mode
 268          * and default boot_targets
 269          */
 270         new_targets = calloc(1, strlen(mode) +
 271                                 strlen(getenv("boot_targets")) + 2);
 272
 273         sprintf(new_targets, "%s %s", mode, getenv("boot_targets"));
 274         setenv("boot_targets", new_targets);
 275
 276         return 0;
 277 }
 278
 279 int checkboard(void)
 280 {
 281         puts("Board: Xilinx ZynqMP\n");
 282         return 0;
 283 }
 284
 285 #ifdef CONFIG_USB_DWC3
 286 static struct dwc3_device dwc3_device_data = {
 287         .maximum_speed = USB_SPEED_HIGH,
 288         .base = ZYNQMP_USB0_XHCI_BASEADDR,
 289         .dr_mode = USB_DR_MODE_PERIPHERAL,
 290         .index = 0,
 291 };
 292
 293 int usb_gadget_handle_interrupts(void)
 294 {
 295         dwc3_uboot_handle_interrupt(0);
 296         return 0;
 297 }
 298
 299 int board_usb_init(int index, enum usb_init_type init)
 300 {
 301         return dwc3_uboot_init(&dwc3_device_data);
 302 }
 303
 304 int board_usb_cleanup(int index, enum usb_init_type init)
 305 {
 306         dwc3_uboot_exit(index);
 307         return 0;
 308 }
 309 #endif
 310
 311 void reset_misc(void)
 312 {
 313         psci_system_reset(true);
 314 }