git.sur5r.net Git - u-boot/blob - cmd/mmc.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2003
   4  * Kyle Harris, kharris@nexus-tech.net
   5  */
   6
   7 #include <common.h>
   8 #include <command.h>
   9 #include <console.h>
  10 #include <mmc.h>
  11
  12 static int curr_device = -1;
  13
  14 static void print_mmcinfo(struct mmc *mmc)
  15 {
  16         int i;
  17
  18         printf("Device: %s\n", mmc->cfg->name);
  19         printf("Manufacturer ID: %x\n", mmc->cid[0] >> 24);
  20         printf("OEM: %x\n", (mmc->cid[0] >> 8) & 0xffff);
  21         printf("Name: %c%c%c%c%c \n", mmc->cid[0] & 0xff,
  22                         (mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff,
  23                         (mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff);
  24
  25         printf("Bus Speed: %d\n", mmc->clock);
  26 #if CONFIG_IS_ENABLED(MMC_VERBOSE)
  27         printf("Mode : %s\n", mmc_mode_name(mmc->selected_mode));
  28         mmc_dump_capabilities("card capabilities", mmc->card_caps);
  29         mmc_dump_capabilities("host capabilities", mmc->host_caps);
  30 #endif
  31         printf("Rd Block Len: %d\n", mmc->read_bl_len);
  32
  33         printf("%s version %d.%d", IS_SD(mmc) ? "SD" : "MMC",
  34                         EXTRACT_SDMMC_MAJOR_VERSION(mmc->version),
  35                         EXTRACT_SDMMC_MINOR_VERSION(mmc->version));
  36         if (EXTRACT_SDMMC_CHANGE_VERSION(mmc->version) != 0)
  37                 printf(".%d", EXTRACT_SDMMC_CHANGE_VERSION(mmc->version));
  38         printf("\n");
  39
  40         printf("High Capacity: %s\n", mmc->high_capacity ? "Yes" : "No");
  41         puts("Capacity: ");
  42         print_size(mmc->capacity, "\n");
  43
  44         printf("Bus Width: %d-bit%s\n", mmc->bus_width,
  45                         mmc->ddr_mode ? " DDR" : "");
  46
  47 #if CONFIG_IS_ENABLED(MMC_WRITE)
  48         puts("Erase Group Size: ");
  49         print_size(((u64)mmc->erase_grp_size) << 9, "\n");
  50 #endif
  51
  52         if (!IS_SD(mmc) && mmc->version >= MMC_VERSION_4_41) {
  53                 bool has_enh = (mmc->part_support & ENHNCD_SUPPORT) != 0;
  54                 bool usr_enh = has_enh && (mmc->part_attr & EXT_CSD_ENH_USR);
  55
  56 #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
  57                 puts("HC WP Group Size: ");
  58                 print_size(((u64)mmc->hc_wp_grp_size) << 9, "\n");
  59 #endif
  60
  61                 puts("User Capacity: ");
  62                 print_size(mmc->capacity_user, usr_enh ? " ENH" : "");
  63                 if (mmc->wr_rel_set & EXT_CSD_WR_DATA_REL_USR)
  64                         puts(" WRREL\n");
  65                 else
  66                         putc('\n');
  67                 if (usr_enh) {
  68                         puts("User Enhanced Start: ");
  69                         print_size(mmc->enh_user_start, "\n");
  70                         puts("User Enhanced Size: ");
  71                         print_size(mmc->enh_user_size, "\n");
  72                 }
  73                 puts("Boot Capacity: ");
  74                 print_size(mmc->capacity_boot, has_enh ? " ENH\n" : "\n");
  75                 puts("RPMB Capacity: ");
  76                 print_size(mmc->capacity_rpmb, has_enh ? " ENH\n" : "\n");
  77
  78                 for (i = 0; i < ARRAY_SIZE(mmc->capacity_gp); i++) {
  79                         bool is_enh = has_enh &&
  80                                 (mmc->part_attr & EXT_CSD_ENH_GP(i));
  81                         if (mmc->capacity_gp[i]) {
  82                                 printf("GP%i Capacity: ", i+1);
  83                                 print_size(mmc->capacity_gp[i],
  84                                            is_enh ? " ENH" : "");
  85                                 if (mmc->wr_rel_set & EXT_CSD_WR_DATA_REL_GP(i))
  86                                         puts(" WRREL\n");
  87                                 else
  88                                         putc('\n');
  89                         }
  90                 }
  91         }
  92 }
  93 static struct mmc *init_mmc_device(int dev, bool force_init)
  94 {
  95         struct mmc *mmc;
  96         mmc = find_mmc_device(dev);
  97         if (!mmc) {
  98                 printf("no mmc device at slot %x\n", dev);
  99                 return NULL;
 100         }
 101
 102         if (force_init)
 103                 mmc->has_init = 0;
 104         if (mmc_init(mmc))
 105                 return NULL;
 106         return mmc;
 107 }
 108 static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 109 {
 110         struct mmc *mmc;
 111
 112         if (curr_device < 0) {
 113                 if (get_mmc_num() > 0)
 114                         curr_device = 0;
 115                 else {
 116                         puts("No MMC device available\n");
 117                         return 1;
 118                 }
 119         }
 120
 121         mmc = init_mmc_device(curr_device, false);
 122         if (!mmc)
 123                 return CMD_RET_FAILURE;
 124
 125         print_mmcinfo(mmc);
 126         return CMD_RET_SUCCESS;
 127 }
 128
 129 #ifdef CONFIG_SUPPORT_EMMC_RPMB
 130 static int confirm_key_prog(void)
 131 {
 132         puts("Warning: Programming authentication key can be done only once !\n"
 133              "         Use this command only if you are sure of what you are doing,\n"
 134              "Really perform the key programming? <y/N> ");
 135         if (confirm_yesno())
 136                 return 1;
 137
 138         puts("Authentication key programming aborted\n");
 139         return 0;
 140 }
 141 static int do_mmcrpmb_key(cmd_tbl_t *cmdtp, int flag,
 142                           int argc, char * const argv[])
 143 {
 144         void *key_addr;
 145         struct mmc *mmc = find_mmc_device(curr_device);
 146
 147         if (argc != 2)
 148                 return CMD_RET_USAGE;
 149
 150         key_addr = (void *)simple_strtoul(argv[1], NULL, 16);
 151         if (!confirm_key_prog())
 152                 return CMD_RET_FAILURE;
 153         if (mmc_rpmb_set_key(mmc, key_addr)) {
 154                 printf("ERROR - Key already programmed ?\n");
 155                 return CMD_RET_FAILURE;
 156         }
 157         return CMD_RET_SUCCESS;
 158 }
 159 static int do_mmcrpmb_read(cmd_tbl_t *cmdtp, int flag,
 160                            int argc, char * const argv[])
 161 {
 162         u16 blk, cnt;
 163         void *addr;
 164         int n;
 165         void *key_addr = NULL;
 166         struct mmc *mmc = find_mmc_device(curr_device);
 167
 168         if (argc < 4)
 169                 return CMD_RET_USAGE;
 170
 171         addr = (void *)simple_strtoul(argv[1], NULL, 16);
 172         blk = simple_strtoul(argv[2], NULL, 16);
 173         cnt = simple_strtoul(argv[3], NULL, 16);
 174
 175         if (argc == 5)
 176                 key_addr = (void *)simple_strtoul(argv[4], NULL, 16);
 177
 178         printf("\nMMC RPMB read: dev # %d, block # %d, count %d ... ",
 179                curr_device, blk, cnt);
 180         n =  mmc_rpmb_read(mmc, addr, blk, cnt, key_addr);
 181
 182         printf("%d RPMB blocks read: %s\n", n, (n == cnt) ? "OK" : "ERROR");
 183         if (n != cnt)
 184                 return CMD_RET_FAILURE;
 185         return CMD_RET_SUCCESS;
 186 }
 187 static int do_mmcrpmb_write(cmd_tbl_t *cmdtp, int flag,
 188                             int argc, char * const argv[])
 189 {
 190         u16 blk, cnt;
 191         void *addr;
 192         int n;
 193         void *key_addr;
 194         struct mmc *mmc = find_mmc_device(curr_device);
 195
 196         if (argc != 5)
 197                 return CMD_RET_USAGE;
 198
 199         addr = (void *)simple_strtoul(argv[1], NULL, 16);
 200         blk = simple_strtoul(argv[2], NULL, 16);
 201         cnt = simple_strtoul(argv[3], NULL, 16);
 202         key_addr = (void *)simple_strtoul(argv[4], NULL, 16);
 203
 204         printf("\nMMC RPMB write: dev # %d, block # %d, count %d ... ",
 205                curr_device, blk, cnt);
 206         n =  mmc_rpmb_write(mmc, addr, blk, cnt, key_addr);
 207
 208         printf("%d RPMB blocks written: %s\n", n, (n == cnt) ? "OK" : "ERROR");
 209         if (n != cnt)
 210                 return CMD_RET_FAILURE;
 211         return CMD_RET_SUCCESS;
 212 }
 213 static int do_mmcrpmb_counter(cmd_tbl_t *cmdtp, int flag,
 214                               int argc, char * const argv[])
 215 {
 216         unsigned long counter;
 217         struct mmc *mmc = find_mmc_device(curr_device);
 218
 219         if (mmc_rpmb_get_counter(mmc, &counter))
 220                 return CMD_RET_FAILURE;
 221         printf("RPMB Write counter= %lx\n", counter);
 222         return CMD_RET_SUCCESS;
 223 }
 224
 225 static cmd_tbl_t cmd_rpmb[] = {
 226         U_BOOT_CMD_MKENT(key, 2, 0, do_mmcrpmb_key, "", ""),
 227         U_BOOT_CMD_MKENT(read, 5, 1, do_mmcrpmb_read, "", ""),
 228         U_BOOT_CMD_MKENT(write, 5, 0, do_mmcrpmb_write, "", ""),
 229         U_BOOT_CMD_MKENT(counter, 1, 1, do_mmcrpmb_counter, "", ""),
 230 };
 231
 232 static int do_mmcrpmb(cmd_tbl_t *cmdtp, int flag,
 233                       int argc, char * const argv[])
 234 {
 235         cmd_tbl_t *cp;
 236         struct mmc *mmc;
 237         char original_part;
 238         int ret;
 239
 240         cp = find_cmd_tbl(argv[1], cmd_rpmb, ARRAY_SIZE(cmd_rpmb));
 241
 242         /* Drop the rpmb subcommand */
 243         argc--;
 244         argv++;
 245
 246         if (cp == NULL || argc > cp->maxargs)
 247                 return CMD_RET_USAGE;
 248         if (flag == CMD_FLAG_REPEAT && !cp->repeatable)
 249                 return CMD_RET_SUCCESS;
 250
 251         mmc = init_mmc_device(curr_device, false);
 252         if (!mmc)
 253                 return CMD_RET_FAILURE;
 254
 255         if (!(mmc->version & MMC_VERSION_MMC)) {
 256                 printf("It is not a EMMC device\n");
 257                 return CMD_RET_FAILURE;
 258         }
 259         if (mmc->version < MMC_VERSION_4_41) {
 260                 printf("RPMB not supported before version 4.41\n");
 261                 return CMD_RET_FAILURE;
 262         }
 263         /* Switch to the RPMB partition */
 264 #ifndef CONFIG_BLK
 265         original_part = mmc->block_dev.hwpart;
 266 #else
 267         original_part = mmc_get_blk_desc(mmc)->hwpart;
 268 #endif
 269         if (blk_select_hwpart_devnum(IF_TYPE_MMC, curr_device, MMC_PART_RPMB) !=
 270             0)
 271                 return CMD_RET_FAILURE;
 272         ret = cp->cmd(cmdtp, flag, argc, argv);
 273
 274         /* Return to original partition */
 275         if (blk_select_hwpart_devnum(IF_TYPE_MMC, curr_device, original_part) !=
 276             0)
 277                 return CMD_RET_FAILURE;
 278         return ret;
 279 }
 280 #endif
 281
 282 static int do_mmc_read(cmd_tbl_t *cmdtp, int flag,
 283                        int argc, char * const argv[])
 284 {
 285         struct mmc *mmc;
 286         u32 blk, cnt, n;
 287         void *addr;
 288
 289         if (argc != 4)
 290                 return CMD_RET_USAGE;
 291
 292         addr = (void *)simple_strtoul(argv[1], NULL, 16);
 293         blk = simple_strtoul(argv[2], NULL, 16);
 294         cnt = simple_strtoul(argv[3], NULL, 16);
 295
 296         mmc = init_mmc_device(curr_device, false);
 297         if (!mmc)
 298                 return CMD_RET_FAILURE;
 299
 300         printf("\nMMC read: dev # %d, block # %d, count %d ... ",
 301                curr_device, blk, cnt);
 302
 303         n = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, addr);
 304         printf("%d blocks read: %s\n", n, (n == cnt) ? "OK" : "ERROR");
 305
 306         return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
 307 }
 308
 309 #if CONFIG_IS_ENABLED(MMC_WRITE)
 310 static int do_mmc_write(cmd_tbl_t *cmdtp, int flag,
 311                         int argc, char * const argv[])
 312 {
 313         struct mmc *mmc;
 314         u32 blk, cnt, n;
 315         void *addr;
 316
 317         if (argc != 4)
 318                 return CMD_RET_USAGE;
 319
 320         addr = (void *)simple_strtoul(argv[1], NULL, 16);
 321         blk = simple_strtoul(argv[2], NULL, 16);
 322         cnt = simple_strtoul(argv[3], NULL, 16);
 323
 324         mmc = init_mmc_device(curr_device, false);
 325         if (!mmc)
 326                 return CMD_RET_FAILURE;
 327
 328         printf("\nMMC write: dev # %d, block # %d, count %d ... ",
 329                curr_device, blk, cnt);
 330
 331         if (mmc_getwp(mmc) == 1) {
 332                 printf("Error: card is write protected!\n");
 333                 return CMD_RET_FAILURE;
 334         }
 335         n = blk_dwrite(mmc_get_blk_desc(mmc), blk, cnt, addr);
 336         printf("%d blocks written: %s\n", n, (n == cnt) ? "OK" : "ERROR");
 337
 338         return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
 339 }
 340 static int do_mmc_erase(cmd_tbl_t *cmdtp, int flag,
 341                         int argc, char * const argv[])
 342 {
 343         struct mmc *mmc;
 344         u32 blk, cnt, n;
 345
 346         if (argc != 3)
 347                 return CMD_RET_USAGE;
 348
 349         blk = simple_strtoul(argv[1], NULL, 16);
 350         cnt = simple_strtoul(argv[2], NULL, 16);
 351
 352         mmc = init_mmc_device(curr_device, false);
 353         if (!mmc)
 354                 return CMD_RET_FAILURE;
 355
 356         printf("\nMMC erase: dev # %d, block # %d, count %d ... ",
 357                curr_device, blk, cnt);
 358
 359         if (mmc_getwp(mmc) == 1) {
 360                 printf("Error: card is write protected!\n");
 361                 return CMD_RET_FAILURE;
 362         }
 363         n = blk_derase(mmc_get_blk_desc(mmc), blk, cnt);
 364         printf("%d blocks erased: %s\n", n, (n == cnt) ? "OK" : "ERROR");
 365
 366         return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
 367 }
 368 #endif
 369
 370 static int do_mmc_rescan(cmd_tbl_t *cmdtp, int flag,
 371                          int argc, char * const argv[])
 372 {
 373         struct mmc *mmc;
 374
 375         mmc = init_mmc_device(curr_device, true);
 376         if (!mmc)
 377                 return CMD_RET_FAILURE;
 378
 379         return CMD_RET_SUCCESS;
 380 }
 381 static int do_mmc_part(cmd_tbl_t *cmdtp, int flag,
 382                        int argc, char * const argv[])
 383 {
 384         struct blk_desc *mmc_dev;
 385         struct mmc *mmc;
 386
 387         mmc = init_mmc_device(curr_device, false);
 388         if (!mmc)
 389                 return CMD_RET_FAILURE;
 390
 391         mmc_dev = blk_get_devnum_by_type(IF_TYPE_MMC, curr_device);
 392         if (mmc_dev != NULL && mmc_dev->type != DEV_TYPE_UNKNOWN) {
 393                 part_print(mmc_dev);
 394                 return CMD_RET_SUCCESS;
 395         }
 396
 397         puts("get mmc type error!\n");
 398         return CMD_RET_FAILURE;
 399 }
 400 static int do_mmc_dev(cmd_tbl_t *cmdtp, int flag,
 401                       int argc, char * const argv[])
 402 {
 403         int dev, part = 0, ret;
 404         struct mmc *mmc;
 405
 406         if (argc == 1) {
 407                 dev = curr_device;
 408         } else if (argc == 2) {
 409                 dev = simple_strtoul(argv[1], NULL, 10);
 410         } else if (argc == 3) {
 411                 dev = (int)simple_strtoul(argv[1], NULL, 10);
 412                 part = (int)simple_strtoul(argv[2], NULL, 10);
 413                 if (part > PART_ACCESS_MASK) {
 414                         printf("#part_num shouldn't be larger than %d\n",
 415                                PART_ACCESS_MASK);
 416                         return CMD_RET_FAILURE;
 417                 }
 418         } else {
 419                 return CMD_RET_USAGE;
 420         }
 421
 422         mmc = init_mmc_device(dev, true);
 423         if (!mmc)
 424                 return CMD_RET_FAILURE;
 425
 426         ret = blk_select_hwpart_devnum(IF_TYPE_MMC, dev, part);
 427         printf("switch to partitions #%d, %s\n",
 428                part, (!ret) ? "OK" : "ERROR");
 429         if (ret)
 430                 return 1;
 431
 432         curr_device = dev;
 433         if (mmc->part_config == MMCPART_NOAVAILABLE)
 434                 printf("mmc%d is current device\n", curr_device);
 435         else
 436                 printf("mmc%d(part %d) is current device\n",
 437                        curr_device, mmc_get_blk_desc(mmc)->hwpart);
 438
 439         return CMD_RET_SUCCESS;
 440 }
 441 static int do_mmc_list(cmd_tbl_t *cmdtp, int flag,
 442                        int argc, char * const argv[])
 443 {
 444         print_mmc_devices('\n');
 445         return CMD_RET_SUCCESS;
 446 }
 447
 448 #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
 449 static int parse_hwpart_user(struct mmc_hwpart_conf *pconf,
 450                              int argc, char * const argv[])
 451 {
 452         int i = 0;
 453
 454         memset(&pconf->user, 0, sizeof(pconf->user));
 455
 456         while (i < argc) {
 457                 if (!strcmp(argv[i], "enh")) {
 458                         if (i + 2 >= argc)
 459                                 return -1;
 460                         pconf->user.enh_start =
 461                                 simple_strtoul(argv[i+1], NULL, 10);
 462                         pconf->user.enh_size =
 463                                 simple_strtoul(argv[i+2], NULL, 10);
 464                         i += 3;
 465                 } else if (!strcmp(argv[i], "wrrel")) {
 466                         if (i + 1 >= argc)
 467                                 return -1;
 468                         pconf->user.wr_rel_change = 1;
 469                         if (!strcmp(argv[i+1], "on"))
 470                                 pconf->user.wr_rel_set = 1;
 471                         else if (!strcmp(argv[i+1], "off"))
 472                                 pconf->user.wr_rel_set = 0;
 473                         else
 474                                 return -1;
 475                         i += 2;
 476                 } else {
 477                         break;
 478                 }
 479         }
 480         return i;
 481 }
 482
 483 static int parse_hwpart_gp(struct mmc_hwpart_conf *pconf, int pidx,
 484                            int argc, char * const argv[])
 485 {
 486         int i;
 487
 488         memset(&pconf->gp_part[pidx], 0, sizeof(pconf->gp_part[pidx]));
 489
 490         if (1 >= argc)
 491                 return -1;
 492         pconf->gp_part[pidx].size = simple_strtoul(argv[0], NULL, 10);
 493
 494         i = 1;
 495         while (i < argc) {
 496                 if (!strcmp(argv[i], "enh")) {
 497                         pconf->gp_part[pidx].enhanced = 1;
 498                         i += 1;
 499                 } else if (!strcmp(argv[i], "wrrel")) {
 500                         if (i + 1 >= argc)
 501                                 return -1;
 502                         pconf->gp_part[pidx].wr_rel_change = 1;
 503                         if (!strcmp(argv[i+1], "on"))
 504                                 pconf->gp_part[pidx].wr_rel_set = 1;
 505                         else if (!strcmp(argv[i+1], "off"))
 506                                 pconf->gp_part[pidx].wr_rel_set = 0;
 507                         else
 508                                 return -1;
 509                         i += 2;
 510                 } else {
 511                         break;
 512                 }
 513         }
 514         return i;
 515 }
 516
 517 static int do_mmc_hwpartition(cmd_tbl_t *cmdtp, int flag,
 518                               int argc, char * const argv[])
 519 {
 520         struct mmc *mmc;
 521         struct mmc_hwpart_conf pconf = { };
 522         enum mmc_hwpart_conf_mode mode = MMC_HWPART_CONF_CHECK;
 523         int i, r, pidx;
 524
 525         mmc = init_mmc_device(curr_device, false);
 526         if (!mmc)
 527                 return CMD_RET_FAILURE;
 528
 529         if (argc < 1)
 530                 return CMD_RET_USAGE;
 531         i = 1;
 532         while (i < argc) {
 533                 if (!strcmp(argv[i], "user")) {
 534                         i++;
 535                         r = parse_hwpart_user(&pconf, argc-i, &argv[i]);
 536                         if (r < 0)
 537                                 return CMD_RET_USAGE;
 538                         i += r;
 539                 } else if (!strncmp(argv[i], "gp", 2) &&
 540                            strlen(argv[i]) == 3 &&
 541                            argv[i][2] >= '1' && argv[i][2] <= '4') {
 542                         pidx = argv[i][2] - '1';
 543                         i++;
 544                         r = parse_hwpart_gp(&pconf, pidx, argc-i, &argv[i]);
 545                         if (r < 0)
 546                                 return CMD_RET_USAGE;
 547                         i += r;
 548                 } else if (!strcmp(argv[i], "check")) {
 549                         mode = MMC_HWPART_CONF_CHECK;
 550                         i++;
 551                 } else if (!strcmp(argv[i], "set")) {
 552                         mode = MMC_HWPART_CONF_SET;
 553                         i++;
 554                 } else if (!strcmp(argv[i], "complete")) {
 555                         mode = MMC_HWPART_CONF_COMPLETE;
 556                         i++;
 557                 } else {
 558                         return CMD_RET_USAGE;
 559                 }
 560         }
 561
 562         puts("Partition configuration:\n");
 563         if (pconf.user.enh_size) {
 564                 puts("\tUser Enhanced Start: ");
 565                 print_size(((u64)pconf.user.enh_start) << 9, "\n");
 566                 puts("\tUser Enhanced Size: ");
 567                 print_size(((u64)pconf.user.enh_size) << 9, "\n");
 568         } else {
 569                 puts("\tNo enhanced user data area\n");
 570         }
 571         if (pconf.user.wr_rel_change)
 572                 printf("\tUser partition write reliability: %s\n",
 573                        pconf.user.wr_rel_set ? "on" : "off");
 574         for (pidx = 0; pidx < 4; pidx++) {
 575                 if (pconf.gp_part[pidx].size) {
 576                         printf("\tGP%i Capacity: ", pidx+1);
 577                         print_size(((u64)pconf.gp_part[pidx].size) << 9,
 578                                    pconf.gp_part[pidx].enhanced ?
 579                                    " ENH\n" : "\n");
 580                 } else {
 581                         printf("\tNo GP%i partition\n", pidx+1);
 582                 }
 583                 if (pconf.gp_part[pidx].wr_rel_change)
 584                         printf("\tGP%i write reliability: %s\n", pidx+1,
 585                                pconf.gp_part[pidx].wr_rel_set ? "on" : "off");
 586         }
 587
 588         if (!mmc_hwpart_config(mmc, &pconf, mode)) {
 589                 if (mode == MMC_HWPART_CONF_COMPLETE)
 590                         puts("Partitioning successful, "
 591                              "power-cycle to make effective\n");
 592                 return CMD_RET_SUCCESS;
 593         } else {
 594                 puts("Failed!\n");
 595                 return CMD_RET_FAILURE;
 596         }
 597 }
 598 #endif
 599
 600 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 601 static int do_mmc_bootbus(cmd_tbl_t *cmdtp, int flag,
 602                           int argc, char * const argv[])
 603 {
 604         int dev;
 605         struct mmc *mmc;
 606         u8 width, reset, mode;
 607
 608         if (argc != 5)
 609                 return CMD_RET_USAGE;
 610         dev = simple_strtoul(argv[1], NULL, 10);
 611         width = simple_strtoul(argv[2], NULL, 10);
 612         reset = simple_strtoul(argv[3], NULL, 10);
 613         mode = simple_strtoul(argv[4], NULL, 10);
 614
 615         mmc = init_mmc_device(dev, false);
 616         if (!mmc)
 617                 return CMD_RET_FAILURE;
 618
 619         if (IS_SD(mmc)) {
 620                 puts("BOOT_BUS_WIDTH only exists on eMMC\n");
 621                 return CMD_RET_FAILURE;
 622         }
 623
 624         /* acknowledge to be sent during boot operation */
 625         return mmc_set_boot_bus_width(mmc, width, reset, mode);
 626 }
 627 static int do_mmc_boot_resize(cmd_tbl_t *cmdtp, int flag,
 628                               int argc, char * const argv[])
 629 {
 630         int dev;
 631         struct mmc *mmc;
 632         u32 bootsize, rpmbsize;
 633
 634         if (argc != 4)
 635                 return CMD_RET_USAGE;
 636         dev = simple_strtoul(argv[1], NULL, 10);
 637         bootsize = simple_strtoul(argv[2], NULL, 10);
 638         rpmbsize = simple_strtoul(argv[3], NULL, 10);
 639
 640         mmc = init_mmc_device(dev, false);
 641         if (!mmc)
 642                 return CMD_RET_FAILURE;
 643
 644         if (IS_SD(mmc)) {
 645                 printf("It is not a EMMC device\n");
 646                 return CMD_RET_FAILURE;
 647         }
 648
 649         if (mmc_boot_partition_size_change(mmc, bootsize, rpmbsize)) {
 650                 printf("EMMC boot partition Size change Failed.\n");
 651                 return CMD_RET_FAILURE;
 652         }
 653
 654         printf("EMMC boot partition Size %d MB\n", bootsize);
 655         printf("EMMC RPMB partition Size %d MB\n", rpmbsize);
 656         return CMD_RET_SUCCESS;
 657 }
 658
 659 static int mmc_partconf_print(struct mmc *mmc)
 660 {
 661         u8 ack, access, part;
 662
 663         if (mmc->part_config == MMCPART_NOAVAILABLE) {
 664                 printf("No part_config info for ver. 0x%x\n", mmc->version);
 665                 return CMD_RET_FAILURE;
 666         }
 667
 668         access = EXT_CSD_EXTRACT_PARTITION_ACCESS(mmc->part_config);
 669         ack = EXT_CSD_EXTRACT_BOOT_ACK(mmc->part_config);
 670         part = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config);
 671
 672         printf("EXT_CSD[179], PARTITION_CONFIG:\n"
 673                 "BOOT_ACK: 0x%x\n"
 674                 "BOOT_PARTITION_ENABLE: 0x%x\n"
 675                 "PARTITION_ACCESS: 0x%x\n", ack, part, access);
 676
 677         return CMD_RET_SUCCESS;
 678 }
 679
 680 static int do_mmc_partconf(cmd_tbl_t *cmdtp, int flag,
 681                            int argc, char * const argv[])
 682 {
 683         int dev;
 684         struct mmc *mmc;
 685         u8 ack, part_num, access;
 686
 687         if (argc != 2 && argc != 5)
 688                 return CMD_RET_USAGE;
 689
 690         dev = simple_strtoul(argv[1], NULL, 10);
 691
 692         mmc = init_mmc_device(dev, false);
 693         if (!mmc)
 694                 return CMD_RET_FAILURE;
 695
 696         if (IS_SD(mmc)) {
 697                 puts("PARTITION_CONFIG only exists on eMMC\n");
 698                 return CMD_RET_FAILURE;
 699         }
 700
 701         if (argc == 2)
 702                 return mmc_partconf_print(mmc);
 703
 704         ack = simple_strtoul(argv[2], NULL, 10);
 705         part_num = simple_strtoul(argv[3], NULL, 10);
 706         access = simple_strtoul(argv[4], NULL, 10);
 707
 708         /* acknowledge to be sent during boot operation */
 709         return mmc_set_part_conf(mmc, ack, part_num, access);
 710 }
 711 static int do_mmc_rst_func(cmd_tbl_t *cmdtp, int flag,
 712                            int argc, char * const argv[])
 713 {
 714         int dev;
 715         struct mmc *mmc;
 716         u8 enable;
 717
 718         /*
 719          * Set the RST_n_ENABLE bit of RST_n_FUNCTION
 720          * The only valid values are 0x0, 0x1 and 0x2 and writing
 721          * a value of 0x1 or 0x2 sets the value permanently.
 722          */
 723         if (argc != 3)
 724                 return CMD_RET_USAGE;
 725
 726         dev = simple_strtoul(argv[1], NULL, 10);
 727         enable = simple_strtoul(argv[2], NULL, 10);
 728
 729         if (enable > 2) {
 730                 puts("Invalid RST_n_ENABLE value\n");
 731                 return CMD_RET_USAGE;
 732         }
 733
 734         mmc = init_mmc_device(dev, false);
 735         if (!mmc)
 736                 return CMD_RET_FAILURE;
 737
 738         if (IS_SD(mmc)) {
 739                 puts("RST_n_FUNCTION only exists on eMMC\n");
 740                 return CMD_RET_FAILURE;
 741         }
 742
 743         return mmc_set_rst_n_function(mmc, enable);
 744 }
 745 #endif
 746 static int do_mmc_setdsr(cmd_tbl_t *cmdtp, int flag,
 747                          int argc, char * const argv[])
 748 {
 749         struct mmc *mmc;
 750         u32 val;
 751         int ret;
 752
 753         if (argc != 2)
 754                 return CMD_RET_USAGE;
 755         val = simple_strtoul(argv[1], NULL, 16);
 756
 757         mmc = find_mmc_device(curr_device);
 758         if (!mmc) {
 759                 printf("no mmc device at slot %x\n", curr_device);
 760                 return CMD_RET_FAILURE;
 761         }
 762         ret = mmc_set_dsr(mmc, val);
 763         printf("set dsr %s\n", (!ret) ? "OK, force rescan" : "ERROR");
 764         if (!ret) {
 765                 mmc->has_init = 0;
 766                 if (mmc_init(mmc))
 767                         return CMD_RET_FAILURE;
 768                 else
 769                         return CMD_RET_SUCCESS;
 770         }
 771         return ret;
 772 }
 773
 774 #ifdef CONFIG_CMD_BKOPS_ENABLE
 775 static int do_mmc_bkops_enable(cmd_tbl_t *cmdtp, int flag,
 776                                    int argc, char * const argv[])
 777 {
 778         int dev;
 779         struct mmc *mmc;
 780
 781         if (argc != 2)
 782                 return CMD_RET_USAGE;
 783
 784         dev = simple_strtoul(argv[1], NULL, 10);
 785
 786         mmc = init_mmc_device(dev, false);
 787         if (!mmc)
 788                 return CMD_RET_FAILURE;
 789
 790         if (IS_SD(mmc)) {
 791                 puts("BKOPS_EN only exists on eMMC\n");
 792                 return CMD_RET_FAILURE;
 793         }
 794
 795         return mmc_set_bkops_enable(mmc);
 796 }
 797 #endif
 798
 799 static cmd_tbl_t cmd_mmc[] = {
 800         U_BOOT_CMD_MKENT(info, 1, 0, do_mmcinfo, "", ""),
 801         U_BOOT_CMD_MKENT(read, 4, 1, do_mmc_read, "", ""),
 802 #if CONFIG_IS_ENABLED(MMC_WRITE)
 803         U_BOOT_CMD_MKENT(write, 4, 0, do_mmc_write, "", ""),
 804         U_BOOT_CMD_MKENT(erase, 3, 0, do_mmc_erase, "", ""),
 805 #endif
 806         U_BOOT_CMD_MKENT(rescan, 1, 1, do_mmc_rescan, "", ""),
 807         U_BOOT_CMD_MKENT(part, 1, 1, do_mmc_part, "", ""),
 808         U_BOOT_CMD_MKENT(dev, 3, 0, do_mmc_dev, "", ""),
 809         U_BOOT_CMD_MKENT(list, 1, 1, do_mmc_list, "", ""),
 810 #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
 811         U_BOOT_CMD_MKENT(hwpartition, 28, 0, do_mmc_hwpartition, "", ""),
 812 #endif
 813 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 814         U_BOOT_CMD_MKENT(bootbus, 5, 0, do_mmc_bootbus, "", ""),
 815         U_BOOT_CMD_MKENT(bootpart-resize, 4, 0, do_mmc_boot_resize, "", ""),
 816         U_BOOT_CMD_MKENT(partconf, 5, 0, do_mmc_partconf, "", ""),
 817         U_BOOT_CMD_MKENT(rst-function, 3, 0, do_mmc_rst_func, "", ""),
 818 #endif
 819 #ifdef CONFIG_SUPPORT_EMMC_RPMB
 820         U_BOOT_CMD_MKENT(rpmb, CONFIG_SYS_MAXARGS, 1, do_mmcrpmb, "", ""),
 821 #endif
 822         U_BOOT_CMD_MKENT(setdsr, 2, 0, do_mmc_setdsr, "", ""),
 823 #ifdef CONFIG_CMD_BKOPS_ENABLE
 824         U_BOOT_CMD_MKENT(bkops-enable, 2, 0, do_mmc_bkops_enable, "", ""),
 825 #endif
 826 };
 827
 828 static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 829 {
 830         cmd_tbl_t *cp;
 831
 832         cp = find_cmd_tbl(argv[1], cmd_mmc, ARRAY_SIZE(cmd_mmc));
 833
 834         /* Drop the mmc command */
 835         argc--;
 836         argv++;
 837
 838         if (cp == NULL || argc > cp->maxargs)
 839                 return CMD_RET_USAGE;
 840         if (flag == CMD_FLAG_REPEAT && !cp->repeatable)
 841                 return CMD_RET_SUCCESS;
 842
 843         if (curr_device < 0) {
 844                 if (get_mmc_num() > 0) {
 845                         curr_device = 0;
 846                 } else {
 847                         puts("No MMC device available\n");
 848                         return CMD_RET_FAILURE;
 849                 }
 850         }
 851         return cp->cmd(cmdtp, flag, argc, argv);
 852 }
 853
 854 U_BOOT_CMD(
 855         mmc, 29, 1, do_mmcops,
 856         "MMC sub system",
 857         "info - display info of the current MMC device\n"
 858         "mmc read addr blk# cnt\n"
 859         "mmc write addr blk# cnt\n"
 860         "mmc erase blk# cnt\n"
 861         "mmc rescan\n"
 862         "mmc part - lists available partition on current mmc device\n"
 863         "mmc dev [dev] [part] - show or set current mmc device [partition]\n"
 864         "mmc list - lists available devices\n"
 865         "mmc hwpartition [args...] - does hardware partitioning\n"
 866         "  arguments (sizes in 512-byte blocks):\n"
 867         "    [user [enh start cnt] [wrrel {on|off}]] - sets user data area attributes\n"
 868         "    [gp1|gp2|gp3|gp4 cnt [enh] [wrrel {on|off}]] - general purpose partition\n"
 869         "    [check|set|complete] - mode, complete set partitioning completed\n"
 870         "  WARNING: Partitioning is a write-once setting once it is set to complete.\n"
 871         "  Power cycling is required to initialize partitions after set to complete.\n"
 872 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 873         "mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n"
 874         " - Set the BOOT_BUS_WIDTH field of the specified device\n"
 875         "mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n"
 876         " - Change sizes of boot and RPMB partitions of specified device\n"
 877         "mmc partconf dev [boot_ack boot_partition partition_access]\n"
 878         " - Show or change the bits of the PARTITION_CONFIG field of the specified device\n"
 879         "mmc rst-function dev value\n"
 880         " - Change the RST_n_FUNCTION field of the specified device\n"
 881         "   WARNING: This is a write-once field and 0 / 1 / 2 are the only valid values.\n"
 882 #endif
 883 #ifdef CONFIG_SUPPORT_EMMC_RPMB
 884         "mmc rpmb read addr blk# cnt [address of auth-key] - block size is 256 bytes\n"
 885         "mmc rpmb write addr blk# cnt <address of auth-key> - block size is 256 bytes\n"
 886         "mmc rpmb key <address of auth-key> - program the RPMB authentication key.\n"
 887         "mmc rpmb counter - read the value of the write counter\n"
 888 #endif
 889         "mmc setdsr <value> - set DSR register value\n"
 890 #ifdef CONFIG_CMD_BKOPS_ENABLE
 891         "mmc bkops-enable <dev> - enable background operations handshake on device\n"
 892         "   WARNING: This is a write-once setting.\n"
 893 #endif
 894         );
 895
 896 /* Old command kept for compatibility. Same as 'mmc info' */
 897 U_BOOT_CMD(
 898         mmcinfo, 1, 0, do_mmcinfo,
 899         "display MMC info",
 900         "- display info of the current MMC device"
 901 );