1 menu "Command line interface"
7 This option enables the "hush" shell (from Busybox) as command line
8 interpreter, thus enabling powerful command line syntax like
9 if...then...else...fi conditionals or `&&' and '||'
10 constructs ("shell scripts").
12 If disabled, you get the old, much simpler behaviour with a somewhat
13 smaller memory footprint.
15 config SYS_HUSH_PARSER
18 Backward compatibility.
20 menu "Autoboot options"
23 bool "Stop autobooting via specific input key / string"
26 This option enables stopping (aborting) of the automatic
27 boot feature only by issuing a specific input key or
28 string. If not enabled, any input key will abort the
29 U-Boot automatic booting process and bring the device
30 to the U-Boot prompt for user input.
32 config AUTOBOOT_PROMPT
33 string "Autoboot stop prompt"
34 depends on AUTOBOOT_KEYED
35 default "Autoboot in %d seconds\\n"
37 This string is displayed before the boot delay selected by
38 CONFIG_BOOTDELAY starts. If it is not defined there is no
39 output indicating that autoboot is in progress.
41 Note that this define is used as the (only) argument to a
42 printf() call, so it may contain '%' format specifications,
43 provided that it also includes, sepearated by commas exactly
44 like in a printf statement, the required arguments. It is
45 the responsibility of the user to select only such arguments
46 that are valid in the given context.
48 config AUTOBOOT_ENCRYPTION
49 bool "Enable encryption in autoboot stopping"
50 depends on AUTOBOOT_KEYED
53 config AUTOBOOT_DELAY_STR
54 string "Delay autobooting via specific input key / string"
55 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
57 This option delays the automatic boot feature by issuing
58 a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
59 or the environment variable "bootdelaykey" is specified
60 and this string is received from console input before
61 autoboot starts booting, U-Boot gives a command prompt. The
62 U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
63 used, otherwise it never times out.
65 config AUTOBOOT_STOP_STR
66 string "Stop autobooting via specific input key / string"
67 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
69 This option enables stopping (aborting) of the automatic
70 boot feature only by issuing a specific input key or
71 string. If CONFIG_AUTOBOOT_STOP_STR or the environment
72 variable "bootstopkey" is specified and this string is
73 received from console input before autoboot starts booting,
74 U-Boot gives a command prompt. The U-Boot prompt never
75 times out, even if CONFIG_BOOT_RETRY_TIME is used.
77 config AUTOBOOT_KEYED_CTRLC
78 bool "Enable Ctrl-C autoboot interruption"
79 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
82 This option allows for the boot sequence to be interrupted
83 by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
84 Setting this variable provides an escape sequence from the
85 limited "password" strings.
87 config AUTOBOOT_STOP_STR_SHA256
88 string "Stop autobooting via SHA256 encrypted password"
89 depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
91 This option adds the feature to only stop the autobooting,
92 and therefore boot into the U-Boot prompt, when the input
93 string / password matches a values that is encypted via
94 a SHA256 hash and saved in the environment.
110 Print console devices and information.
115 Print information about available CPUs. This normally shows the
116 number of CPUs, type (e.g. manufacturer, architecture, product or
117 internal name) and clock frequency. Other information may be
118 available depending on the CPU driver.
123 Print GPL license text
132 Run the command stored in the environment "bootcmd", i.e.
133 "bootd" does the same thing as "run bootcmd".
139 Boot an application image from the memory.
145 Start an application at a given address.
150 Run the command in the given environment variable.
155 Print header information for application image.
160 List all images found in flash
165 Extract a part of a multi-image.
169 menu "Environment commands"
186 Edit environment variable.
191 Save all environment variables into the compiled-in persistent
196 menu "Memory commands"
199 bool "md, mm, nm, mw, cp, cmp, base, loop"
203 mm - memory modify (auto-incrementing address)
204 nm - memory modify (constant address)
205 mw - memory write (fill)
208 base - print or set address offset
209 loop - initinite loop on address range
220 Infinite write loop on address range
225 Simple RAM read/write test.
230 mdc - memory display cyclic
231 mwc - memory write cyclic
236 Display memory information.
240 menu "Device access commands"
243 bool "dm - Access to driver model information"
247 Provides access to driver model data structures and information,
248 such as a list of devices, list of uclasses and the state of each
249 device (e.g. activated). This is not required for operation, but
250 can be useful to see the state of driver model for debugging or
254 bool "demo - Demonstration commands for driver model"
257 Provides a 'demo' command which can be used to play around with
258 driver model. To use this properly you will need to enable one or
259 both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
260 Otherwise you will always get an empty list of devices. The demo
261 devices are defined in the sandbox device tree, so the easiest
262 option is to use sandbox and pass the -d point to sandbox's
268 Load a binary file over serial line.
273 Load an S-Record file over serial line
276 bool "flinfo, erase, protect"
279 flinfo - print FLASH memory information
281 protect - enable or disable FLASH write protection
284 depends on FLASH_CFI_DRIVER
287 ARM Ltd reference designs flash partition access
317 menu "Shell scripting commands"
327 Return true/false on integer compare.
332 Run script from memory
337 Evaluate boolean and math expressions and store the result in an env
339 Also supports loading the value at a memory location into a variable.
340 If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
344 menu "Network commands"
347 bool "bootp, tftpboot"
351 bootp - boot image via network using BOOTP/TFTP protocol
352 tftpboot - boot image via network using TFTP protocol
357 TFTP put command, for uploading files to a server
362 Act as a TFTP server and boot the first received file
367 Boot image via network using RARP/TFTP protocol
372 Boot image via network using DHCP/TFTP protocol
377 Boot image via network using NFS protocol.
382 Send ICMP ECHO_REQUEST to network host
387 Perform CDP network configuration
392 Synchronize RTC via network
397 Lookup the IP of a hostname
399 config CMD_LINK_LOCAL
402 Acquire a network IP address using the link-local protocol
411 Run commands and summarize execution time.
413 # TODO: rename to CMD_SLEEP
417 Delay execution for some time
422 Access the system timer.
425 bool "getdcr, setdcr, getidcr, setidcr"
428 getdcr - Get an AMCC PPC 4xx DCR's value
429 setdcr - Set an AMCC PPC 4xx DCR's value
430 getidcr - Get a register value via indirect DCR addressing
431 setidcr - Set a register value via indirect DCR addressing
437 This provides basic access to the U-Boot's sound support. The main
438 feature is to play a beep.
440 sound init - set up sound system
441 sound play - play a sound
448 bool "Boot timing and reporting"
450 Enable recording of boot time while booting. To use it, insert
451 calls to bootstage_mark() with a suitable BOOTSTAGE_ID from
452 bootstage.h. Only a single entry is recorded for each ID. You can
453 give the entry a name with bootstage_mark_name(). You can also
454 record elapsed time in a particular stage using bootstage_start()
455 before starting and bootstage_accum() when finished. Bootstage will
456 add up all the accumated time and report it.
458 Normally, IDs are defined in bootstage.h but a small number of
459 additional 'user' IDs can be used but passing BOOTSTAGE_ID_ALLOC
462 Calls to show_boot_progress() wil also result in log entries but
463 these will not have names.
465 config BOOTSTAGE_REPORT
466 bool "Display a detailed boot timing report before booting the OS"
469 Enable output of a boot time report just before the OS is booted.
470 This shows how long it took U-Boot to go through each stage of the
471 boot process. The report looks something like this:
473 Timer summary in microseconds:
476 3,575,678 3,575,678 board_init_f start
477 3,575,695 17 arch_cpu_init A9
478 3,575,777 82 arch_cpu_init done
479 3,659,598 83,821 board_init_r start
480 3,910,375 250,777 main_loop
481 29,916,167 26,005,792 bootm_start
482 30,361,327 445,160 start_kernel
484 config BOOTSTAGE_USER_COUNT
485 hex "Number of boot ID numbers available for user use"
488 This is the number of available user bootstage records.
489 Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...)
490 a new ID will be allocated from this stash. If you exceed
491 the limit, recording will stop.
494 bool "Enable the 'bootstage' command"
497 Add a 'bootstage' command which supports printing a report
498 and un/stashing of bootstage data.
501 bool "Store boot timing information in the OS device tree"
504 Stash the bootstage information in the FDT. A root 'bootstage'
505 node is created with each bootstage id as a child. Each child
506 has a 'name' property and either 'mark' containing the
507 mark time in microsecond, or 'accum' containing the
508 accumulated time for that bootstage id in microseconds.
513 name = "board_init_f";
522 Code in the Linux kernel can find this in /proc/devicetree.
524 config BOOTSTAGE_STASH
525 bool "Stash the boot timing information in memory before booting OS"
528 Some OSes do not support device tree. Bootstage can instead write
529 the boot timing information in a binary format at a given address.
530 This happens through a call to bootstage_stash(), typically in
531 the CPU's cleanup_before_linux() function. You can use the
532 'bootstage stash' and 'bootstage unstash' commands to do this on
535 config BOOTSTAGE_STASH_ADDR
536 hex "Address to stash boot timing information"
539 Provide an address which will not be overwritten by the OS when it
540 starts, so that it can read this information when ready.
542 config BOOTSTAGE_STASH_SIZE
543 hex "Size of boot timing stash region"
546 This should be large enough to hold the bootstage stash. A value of
547 4096 (4KiB) is normally plenty.
551 menu "Power commands"
553 bool "Enable Driver Model PMIC command"
556 This is the pmic command, based on a driver model pmic's API.
557 Command features are unchanged:
558 - list - list pmic devices
559 - pmic dev <id> - show or [set] operating pmic device (NEW)
560 - pmic dump - dump registers
561 - pmic read address - read byte of register at address
562 - pmic write address - write byte to register at address
563 The only one change for this command is 'dev' subcommand.
566 bool "Enable Driver Model REGULATOR command"
567 depends on DM_REGULATOR
569 This command is based on driver model regulator's API.
570 User interface features:
571 - list - list regulator devices
572 - regulator dev <id> - show or [set] operating regulator device
573 - regulator info - print constraints info
574 - regulator status - print operating status
575 - regulator value <val] <-f> - print/[set] voltage value [uV]
576 - regulator current <val> - print/[set] current value [uA]
577 - regulator mode <id> - print/[set] operating mode id
578 - regulator enable - enable the regulator output
579 - regulator disable - disable the regulator output
581 The '-f' (force) option can be used for set the value which exceeds
582 the limits, which are found in device-tree and are kept in regulator's
583 uclass platdata structure.