git.sur5r.net Git - u-boot/blob - common/cmd_mii.c

   1 /*
   2  * (C) Copyright 2001
   3  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * MII Utilities
  26  */
  27
  28 #include <common.h>
  29 #include <command.h>
  30 #include <miiphy.h>
  31
  32 typedef struct _MII_reg_desc_t {
  33         ushort regno;
  34         char * name;
  35 } MII_reg_desc_t;
  36
  37 static const MII_reg_desc_t reg_0_5_desc_tbl[] = {
  38         { MII_BMCR,      "PHY control register" },
  39         { MII_BMSR,      "PHY status register" },
  40         { MII_PHYSID1,   "PHY ID 1 register" },
  41         { MII_PHYSID2,   "PHY ID 2 register" },
  42         { MII_ADVERTISE, "Autonegotiation advertisement register" },
  43         { MII_LPA,       "Autonegotiation partner abilities register" },
  44 };
  45
  46 typedef struct _MII_field_desc_t {
  47         ushort hi;
  48         ushort lo;
  49         ushort mask;
  50         char * name;
  51 } MII_field_desc_t;
  52
  53 static const MII_field_desc_t reg_0_desc_tbl[] = {
  54         { 15, 15, 0x01, "reset"                        },
  55         { 14, 14, 0x01, "loopback"                     },
  56         { 13,  6, 0x81, "speed selection"              }, /* special */
  57         { 12, 12, 0x01, "A/N enable"                   },
  58         { 11, 11, 0x01, "power-down"                   },
  59         { 10, 10, 0x01, "isolate"                      },
  60         {  9,  9, 0x01, "restart A/N"                  },
  61         {  8,  8, 0x01, "duplex"                       }, /* special */
  62         {  7,  7, 0x01, "collision test enable"        },
  63         {  5,  0, 0x3f, "(reserved)"                   }
  64 };
  65
  66 static const MII_field_desc_t reg_1_desc_tbl[] = {
  67         { 15, 15, 0x01, "100BASE-T4 able"              },
  68         { 14, 14, 0x01, "100BASE-X  full duplex able"  },
  69         { 13, 13, 0x01, "100BASE-X  half duplex able"  },
  70         { 12, 12, 0x01, "10 Mbps    full duplex able"  },
  71         { 11, 11, 0x01, "10 Mbps    half duplex able"  },
  72         { 10, 10, 0x01, "100BASE-T2 full duplex able"  },
  73         {  9,  9, 0x01, "100BASE-T2 half duplex able"  },
  74         {  8,  8, 0x01, "extended status"              },
  75         {  7,  7, 0x01, "(reserved)"                   },
  76         {  6,  6, 0x01, "MF preamble suppression"      },
  77         {  5,  5, 0x01, "A/N complete"                 },
  78         {  4,  4, 0x01, "remote fault"                 },
  79         {  3,  3, 0x01, "A/N able"                     },
  80         {  2,  2, 0x01, "link status"                  },
  81         {  1,  1, 0x01, "jabber detect"                },
  82         {  0,  0, 0x01, "extended capabilities"        },
  83 };
  84
  85 static const MII_field_desc_t reg_2_desc_tbl[] = {
  86         { 15,  0, 0xffff, "OUI portion"                },
  87 };
  88
  89 static const MII_field_desc_t reg_3_desc_tbl[] = {
  90         { 15, 10, 0x3f, "OUI portion"                },
  91         {  9,  4, 0x3f, "manufacturer part number"   },
  92         {  3,  0, 0x0f, "manufacturer rev. number"   },
  93 };
  94
  95 static const MII_field_desc_t reg_4_desc_tbl[] = {
  96         { 15, 15, 0x01, "next page able"               },
  97         { 14, 14, 0x01, "reserved"                     },
  98         { 13, 13, 0x01, "remote fault"                 },
  99         { 12, 12, 0x01, "reserved"                     },
 100         { 11, 11, 0x01, "asymmetric pause"             },
 101         { 10, 10, 0x01, "pause enable"                 },
 102         {  9,  9, 0x01, "100BASE-T4 able"              },
 103         {  8,  8, 0x01, "100BASE-TX full duplex able"  },
 104         {  7,  7, 0x01, "100BASE-TX able"              },
 105         {  6,  6, 0x01, "10BASE-T   full duplex able"  },
 106         {  5,  5, 0x01, "10BASE-T   able"              },
 107         {  4,  0, 0x1f, "xxx to do"                    },
 108 };
 109
 110 static const MII_field_desc_t reg_5_desc_tbl[] = {
 111         { 15, 15, 0x01, "next page able"               },
 112         { 14, 14, 0x01, "acknowledge"                  },
 113         { 13, 13, 0x01, "remote fault"                 },
 114         { 12, 12, 0x01, "(reserved)"                   },
 115         { 11, 11, 0x01, "asymmetric pause able"        },
 116         { 10, 10, 0x01, "pause able"                   },
 117         {  9,  9, 0x01, "100BASE-T4 able"              },
 118         {  8,  8, 0x01, "100BASE-X full duplex able"   },
 119         {  7,  7, 0x01, "100BASE-TX able"              },
 120         {  6,  6, 0x01, "10BASE-T full duplex able"    },
 121         {  5,  5, 0x01, "10BASE-T able"                },
 122         {  4,  0, 0x1f, "xxx to do"                    },
 123 };
 124 typedef struct _MII_field_desc_and_len_t {
 125         const MII_field_desc_t *pdesc;
 126         ushort len;
 127 } MII_field_desc_and_len_t;
 128
 129 static const MII_field_desc_and_len_t desc_and_len_tbl[] = {
 130         { reg_0_desc_tbl, ARRAY_SIZE(reg_0_desc_tbl)   },
 131         { reg_1_desc_tbl, ARRAY_SIZE(reg_1_desc_tbl)   },
 132         { reg_2_desc_tbl, ARRAY_SIZE(reg_2_desc_tbl)   },
 133         { reg_3_desc_tbl, ARRAY_SIZE(reg_3_desc_tbl)   },
 134         { reg_4_desc_tbl, ARRAY_SIZE(reg_4_desc_tbl)   },
 135         { reg_5_desc_tbl, ARRAY_SIZE(reg_5_desc_tbl)   },
 136 };
 137
 138 static void dump_reg(
 139         ushort             regval,
 140         const MII_reg_desc_t *prd,
 141         const MII_field_desc_and_len_t *pdl);
 142
 143 static int special_field(
 144         ushort regno,
 145         const MII_field_desc_t *pdesc,
 146         ushort regval);
 147
 148 static void MII_dump_0_to_5(
 149         ushort regvals[6],
 150         uchar reglo,
 151         uchar reghi)
 152 {
 153         ulong i;
 154
 155         for (i = 0; i < 6; i++) {
 156                 if ((reglo <= i) && (i <= reghi))
 157                         dump_reg(regvals[i], &reg_0_5_desc_tbl[i],
 158                                 &desc_and_len_tbl[i]);
 159         }
 160 }
 161
 162 static void dump_reg(
 163         ushort             regval,
 164         const MII_reg_desc_t *prd,
 165         const MII_field_desc_and_len_t *pdl)
 166 {
 167         ulong i;
 168         ushort mask_in_place;
 169         const MII_field_desc_t *pdesc;
 170
 171         printf("%u.     (%04hx)                 -- %s --\n",
 172                 prd->regno, regval, prd->name);
 173
 174         for (i = 0; i < pdl->len; i++) {
 175                 pdesc = &pdl->pdesc[i];
 176
 177                 mask_in_place = pdesc->mask << pdesc->lo;
 178
 179                 printf("  (%04hx:%04hx) %u.",
 180                         mask_in_place,
 181                         regval & mask_in_place,
 182                         prd->regno);
 183
 184                 if (special_field(prd->regno, pdesc, regval)) {
 185                 }
 186                 else {
 187                         if (pdesc->hi == pdesc->lo)
 188                                 printf("%2u   ", pdesc->lo);
 189                         else
 190                                 printf("%2u-%2u", pdesc->hi, pdesc->lo);
 191                         printf(" = %5u    %s",
 192                                 (regval & mask_in_place) >> pdesc->lo,
 193                                 pdesc->name);
 194                 }
 195                 printf("\n");
 196
 197         }
 198         printf("\n");
 199 }
 200
 201 /* Special fields:
 202 ** 0.6,13
 203 ** 0.8
 204 ** 2.15-0
 205 ** 3.15-0
 206 ** 4.4-0
 207 ** 5.4-0
 208 */
 209
 210 static int special_field(
 211         ushort regno,
 212         const MII_field_desc_t *pdesc,
 213         ushort regval)
 214 {
 215         if ((regno == MII_BMCR) && (pdesc->lo == 6)) {
 216                 ushort speed_bits = regval & (BMCR_SPEED1000 | BMCR_SPEED100);
 217                 printf("%2u,%2u =   b%u%u    speed selection = %s Mbps",
 218                         6, 13,
 219                         (regval >>  6) & 1,
 220                         (regval >> 13) & 1,
 221                         speed_bits == BMCR_SPEED1000 ? "1000" :
 222                         speed_bits == BMCR_SPEED100  ? "100" :
 223                         "10");
 224                 return 1;
 225         }
 226
 227         else if ((regno == MII_BMCR) && (pdesc->lo == 8)) {
 228                 printf("%2u    = %5u    duplex = %s",
 229                         pdesc->lo,
 230                         (regval >>  pdesc->lo) & 1,
 231                         ((regval >> pdesc->lo) & 1) ? "full" : "half");
 232                 return 1;
 233         }
 234
 235         else if ((regno == MII_ADVERTISE) && (pdesc->lo == 0)) {
 236                 ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
 237                 printf("%2u-%2u = %5u    selector = %s",
 238                         pdesc->hi, pdesc->lo, sel_bits,
 239                         sel_bits == PHY_ANLPAR_PSB_802_3 ?
 240                                 "IEEE 802.3" :
 241                         sel_bits == PHY_ANLPAR_PSB_802_9 ?
 242                                 "IEEE 802.9 ISLAN-16T" :
 243                         "???");
 244                 return 1;
 245         }
 246
 247         else if ((regno == MII_LPA) && (pdesc->lo == 0)) {
 248                 ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
 249                 printf("%2u-%2u =     %u    selector = %s",
 250                         pdesc->hi, pdesc->lo, sel_bits,
 251                         sel_bits == PHY_ANLPAR_PSB_802_3 ?
 252                                 "IEEE 802.3" :
 253                         sel_bits == PHY_ANLPAR_PSB_802_9 ?
 254                                 "IEEE 802.9 ISLAN-16T" :
 255                         "???");
 256                 return 1;
 257         }
 258
 259         return 0;
 260 }
 261
 262 static char last_op[2];
 263 static uint last_data;
 264 static uint last_addr_lo;
 265 static uint last_addr_hi;
 266 static uint last_reg_lo;
 267 static uint last_reg_hi;
 268
 269 static void extract_range(
 270         char * input,
 271         unsigned char * plo,
 272         unsigned char * phi)
 273 {
 274         char * end;
 275         *plo = simple_strtoul(input, &end, 16);
 276         if (*end == '-') {
 277                 end++;
 278                 *phi = simple_strtoul(end, NULL, 16);
 279         }
 280         else {
 281                 *phi = *plo;
 282         }
 283 }
 284
 285 /* ---------------------------------------------------------------- */
 286 static int do_mii(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 287 {
 288         char            op[2];
 289         unsigned char   addrlo, addrhi, reglo, reghi;
 290         unsigned char   addr, reg;
 291         unsigned short  data;
 292         int             rcode = 0;
 293         const char      *devname;
 294
 295         if (argc < 2)
 296                 return cmd_usage(cmdtp);
 297
 298 #if defined(CONFIG_MII_INIT)
 299         mii_init ();
 300 #endif
 301
 302         /*
 303          * We use the last specified parameters, unless new ones are
 304          * entered.
 305          */
 306         op[0] = last_op[0];
 307         op[1] = last_op[1];
 308         addrlo = last_addr_lo;
 309         addrhi = last_addr_hi;
 310         reglo  = last_reg_lo;
 311         reghi  = last_reg_hi;
 312         data   = last_data;
 313
 314         if ((flag & CMD_FLAG_REPEAT) == 0) {
 315                 op[0] = argv[1][0];
 316                 if (strlen(argv[1]) > 1)
 317                         op[1] = argv[1][1];
 318                 else
 319                         op[1] = '\0';
 320
 321                 if (argc >= 3)
 322                         extract_range(argv[2], &addrlo, &addrhi);
 323                 if (argc >= 4)
 324                         extract_range(argv[3], &reglo, &reghi);
 325                 if (argc >= 5)
 326                         data = simple_strtoul (argv[4], NULL, 16);
 327         }
 328
 329         /* use current device */
 330         devname = miiphy_get_current_dev();
 331
 332         /*
 333          * check info/read/write.
 334          */
 335         if (op[0] == 'i') {
 336                 unsigned char j, start, end;
 337                 unsigned int oui;
 338                 unsigned char model;
 339                 unsigned char rev;
 340
 341                 /*
 342                  * Look for any and all PHYs.  Valid addresses are 0..31.
 343                  */
 344                 if (argc >= 3) {
 345                         start = addrlo; end = addrhi;
 346                 } else {
 347                         start = 0; end = 31;
 348                 }
 349
 350                 for (j = start; j <= end; j++) {
 351                         if (miiphy_info (devname, j, &oui, &model, &rev) == 0) {
 352                                 printf("PHY 0x%02X: "
 353                                         "OUI = 0x%04X, "
 354                                         "Model = 0x%02X, "
 355                                         "Rev = 0x%02X, "
 356                                         "%3dbase%s, %s\n",
 357                                         j, oui, model, rev,
 358                                         miiphy_speed (devname, j),
 359                                         miiphy_is_1000base_x (devname, j)
 360                                                 ? "X" : "T",
 361                                         (miiphy_duplex (devname, j) == FULL)
 362                                                 ? "FDX" : "HDX");
 363                         }
 364                 }
 365         } else if (op[0] == 'r') {
 366                 for (addr = addrlo; addr <= addrhi; addr++) {
 367                         for (reg = reglo; reg <= reghi; reg++) {
 368                                 data = 0xffff;
 369                                 if (miiphy_read (devname, addr, reg, &data) != 0) {
 370                                         printf(
 371                                         "Error reading from the PHY addr=%02x reg=%02x\n",
 372                                                 addr, reg);
 373                                         rcode = 1;
 374                                 } else {
 375                                         if ((addrlo != addrhi) || (reglo != reghi))
 376                                                 printf("addr=%02x reg=%02x data=",
 377                                                         (uint)addr, (uint)reg);
 378                                         printf("%04X\n", data & 0x0000FFFF);
 379                                 }
 380                         }
 381                         if ((addrlo != addrhi) && (reglo != reghi))
 382                                 printf("\n");
 383                 }
 384         } else if (op[0] == 'w') {
 385                 for (addr = addrlo; addr <= addrhi; addr++) {
 386                         for (reg = reglo; reg <= reghi; reg++) {
 387                                 if (miiphy_write (devname, addr, reg, data) != 0) {
 388                                         printf("Error writing to the PHY addr=%02x reg=%02x\n",
 389                                                 addr, reg);
 390                                         rcode = 1;
 391                                 }
 392                         }
 393                 }
 394         } else if (strncmp(op, "du", 2) == 0) {
 395                 ushort regs[6];
 396                 int ok = 1;
 397                 if ((reglo > 5) || (reghi > 5)) {
 398                         printf(
 399                                 "The MII dump command only formats the "
 400                                 "standard MII registers, 0-5.\n");
 401                         return 1;
 402                 }
 403                 for (addr = addrlo; addr <= addrhi; addr++) {
 404                         for (reg = reglo; reg < reghi + 1; reg++) {
 405                                 if (miiphy_read(devname, addr, reg, &regs[reg]) != 0) {
 406                                         ok = 0;
 407                                         printf(
 408                                         "Error reading from the PHY addr=%02x reg=%02x\n",
 409                                                 addr, reg);
 410                                         rcode = 1;
 411                                 }
 412                         }
 413                         if (ok)
 414                                 MII_dump_0_to_5(regs, reglo, reghi);
 415                         printf("\n");
 416                 }
 417         } else if (strncmp(op, "de", 2) == 0) {
 418                 if (argc == 2)
 419                         miiphy_listdev ();
 420                 else
 421                         miiphy_set_current_dev (argv[2]);
 422         } else {
 423                 return cmd_usage(cmdtp);
 424         }
 425
 426         /*
 427          * Save the parameters for repeats.
 428          */
 429         last_op[0] = op[0];
 430         last_op[1] = op[1];
 431         last_addr_lo = addrlo;
 432         last_addr_hi = addrhi;
 433         last_reg_lo  = reglo;
 434         last_reg_hi  = reghi;
 435         last_data    = data;
 436
 437         return rcode;
 438 }
 439
 440 /***************************************************/
 441
 442 U_BOOT_CMD(
 443         mii,    5,      1,      do_mii,
 444         "MII utility commands",
 445         "device                     - list available devices\n"
 446         "mii device <devname>           - set current device\n"
 447         "mii info   <addr>              - display MII PHY info\n"
 448         "mii read   <addr> <reg>        - read  MII PHY <addr> register <reg>\n"
 449         "mii write  <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
 450         "mii dump   <addr> <reg>        - pretty-print <addr> <reg> (0-5 only)\n"
 451         "Addr and/or reg may be ranges, e.g. 2-7."
 452 );