git.sur5r.net Git - u-boot/blob - common/cmd_nand.c

   1 /*
   2  * Driver for NAND support, Rick Bronson
   3  * borrowed heavily from:
   4  * (c) 1999 Machine Vision Holdings, Inc.
   5  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
   6  *
   7  * Added 16-bit nand support
   8  * (C) 2004 Texas Instruments
   9  */
  10
  11 #include <common.h>
  12
  13
  14 #ifndef CFG_NAND_LEGACY
  15 /*
  16  *
  17  * New NAND support
  18  *
  19  */
  20 #include <common.h>
  21
  22 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
  23
  24 #include <command.h>
  25 #include <watchdog.h>
  26 #include <malloc.h>
  27 #include <asm/byteorder.h>
  28
  29 #ifdef CONFIG_SHOW_BOOT_PROGRESS
  30 # include <status_led.h>
  31 # define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
  32 #else
  33 # define SHOW_BOOT_PROGRESS(arg)
  34 #endif
  35
  36 #include <jffs2/jffs2.h>
  37 #include <nand.h>
  38
  39 #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
  40
  41 /* parition handling routines */
  42 int mtdparts_init(void);
  43 int id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num);
  44 int find_dev_and_part(const char *id, struct mtd_device **dev,
  45                 u8 *part_num, struct part_info **part);
  46 #endif
  47
  48 extern nand_info_t nand_info[];       /* info for NAND chips */
  49
  50 static int nand_dump_oob(nand_info_t *nand, ulong off)
  51 {
  52         return 0;
  53 }
  54
  55 static int nand_dump(nand_info_t *nand, ulong off)
  56 {
  57         int i;
  58         u_char *buf, *p;
  59
  60         buf = malloc(nand->oobblock + nand->oobsize);
  61         if (!buf) {
  62                 puts("No memory for page buffer\n");
  63                 return 1;
  64         }
  65         off &= ~(nand->oobblock - 1);
  66         i = nand_read_raw(nand, buf, off, nand->oobblock, nand->oobsize);
  67         if (i < 0) {
  68                 printf("Error (%d) reading page %08x\n", i, off);
  69                 free(buf);
  70                 return 1;
  71         }
  72         printf("Page %08x dump:\n", off);
  73         i = nand->oobblock >> 4; p = buf;
  74         while (i--) {
  75                 printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x"
  76                         "  %02x %02x %02x %02x %02x %02x %02x %02x\n",
  77                         p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
  78                         p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]);
  79                 p += 16;
  80         }
  81         puts("OOB:\n");
  82         i = nand->oobsize >> 3;
  83         while (i--) {
  84                 printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
  85                         p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
  86                 p += 8;
  87         }
  88         free(buf);
  89
  90         return 0;
  91 }
  92
  93 /* ------------------------------------------------------------------------- */
  94
  95 static inline int str2long(char *p, ulong *num)
  96 {
  97         char *endptr;
  98
  99         *num = simple_strtoul(p, &endptr, 16);
 100         return (*p != '\0' && *endptr == '\0') ? 1 : 0;
 101 }
 102
 103 static int
 104 arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, ulong *size)
 105 {
 106         int idx = nand_curr_device;
 107 #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 108         struct mtd_device *dev;
 109         struct part_info *part;
 110         u8 pnum;
 111
 112         if (argc >= 1 && !(str2long(argv[0], off))) {
 113                 if ((mtdparts_init() == 0) &&
 114                     (find_dev_and_part(argv[0], &dev, &pnum, &part) == 0)) {
 115                         if (dev->id->type != MTD_DEV_TYPE_NAND) {
 116                                 puts("not a NAND device\n");
 117                                 return -1;
 118                         }
 119                         *off = part->offset;
 120                         if (argc >= 2) {
 121                                 if (!(str2long(argv[1], size))) {
 122                                         printf("'%s' is not a number\n", argv[1]);
 123                                         return -1;
 124                                 }
 125                                 if (*size > part->size)
 126                                         *size = part->size;
 127                         } else {
 128                                 *size = part->size;
 129                         }
 130                         idx = dev->id->num;
 131                         *nand = nand_info[idx];
 132                         goto out;
 133                 }
 134         }
 135 #endif
 136
 137         if (argc >= 1) {
 138                 if (!(str2long(argv[0], off))) {
 139                         printf("'%s' is not a number\n", argv[0]);
 140                         return -1;
 141                 }
 142         } else {
 143                 *off = 0;
 144         }
 145
 146         if (argc >= 2) {
 147                 if (!(str2long(argv[1], size))) {
 148                         printf("'%s' is not a number\n", argv[1]);
 149                         return -1;
 150                 }
 151         } else {
 152                 *size = nand->size - *off;
 153         }
 154
 155 #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 156 out:
 157 #endif
 158         printf("device %d ", idx);
 159         if (*size == nand->size)
 160                 puts("whole chip\n");
 161         else
 162                 printf("offset 0x%x, size 0x%x\n", *off, *size);
 163         return 0;
 164 }
 165
 166 int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 167 {
 168         int i, dev, ret;
 169         ulong addr, off, size;
 170         char *cmd, *s;
 171         nand_info_t *nand;
 172         int quiet = 0;
 173         const char *quiet_str = getenv("quiet");
 174
 175         /* at least two arguments please */
 176         if (argc < 2)
 177                 goto usage;
 178
 179         if (quiet_str)
 180                 quiet = simple_strtoul(quiet_str, NULL, 0) != 0;
 181
 182         cmd = argv[1];
 183
 184         if (strcmp(cmd, "info") == 0) {
 185
 186                 putc('\n');
 187                 for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
 188                         if (nand_info[i].name)
 189                                 printf("Device %d: %s, sector size %lu KiB\n",
 190                                         i, nand_info[i].name,
 191                                         nand_info[i].erasesize >> 10);
 192                 }
 193                 return 0;
 194         }
 195
 196         if (strcmp(cmd, "device") == 0) {
 197
 198                 if (argc < 3) {
 199                         if ((nand_curr_device < 0) ||
 200                             (nand_curr_device >= CFG_MAX_NAND_DEVICE))
 201                                 puts("\nno devices available\n");
 202                         else
 203                                 printf("\nDevice %d: %s\n", nand_curr_device,
 204                                         nand_info[nand_curr_device].name);
 205                         return 0;
 206                 }
 207                 dev = (int)simple_strtoul(argv[2], NULL, 10);
 208                 if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) {
 209                         puts("No such device\n");
 210                         return 1;
 211                 }
 212                 printf("Device %d: %s", dev, nand_info[dev].name);
 213                 puts("... is now current device\n");
 214                 nand_curr_device = dev;
 215
 216 #ifdef CFG_NAND_SELECT_DEVICE
 217                 /*
 218                  * Select the chip in the board/cpu specific driver
 219                  */
 220                 board_nand_select_device(nand_info[dev].priv, dev);
 221 #endif
 222
 223                 return 0;
 224         }
 225
 226         if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 &&
 227             strncmp(cmd, "dump", 4) != 0 &&
 228             strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 &&
 229             strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 &&
 230             strcmp(cmd, "biterr") != 0 &&
 231             strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 )
 232                 goto usage;
 233
 234         /* the following commands operate on the current device */
 235         if (nand_curr_device < 0 || nand_curr_device >= CFG_MAX_NAND_DEVICE ||
 236             !nand_info[nand_curr_device].name) {
 237                 puts("\nno devices available\n");
 238                 return 1;
 239         }
 240         nand = &nand_info[nand_curr_device];
 241
 242         if (strcmp(cmd, "bad") == 0) {
 243                 printf("\nDevice %d bad blocks:\n", nand_curr_device);
 244                 for (off = 0; off < nand->size; off += nand->erasesize)
 245                         if (nand_block_isbad(nand, off))
 246                                 printf("  %08x\n", off);
 247                 return 0;
 248         }
 249
 250         /*
 251          * Syntax is:
 252          *   0    1     2       3    4
 253          *   nand erase [clean] [off size]
 254          */
 255         if (strcmp(cmd, "erase") == 0 || strcmp(cmd, "scrub") == 0) {
 256                 nand_erase_options_t opts;
 257                 /* "clean" at index 2 means request to write cleanmarker */
 258                 int clean = argc > 2 && !strcmp("clean", argv[2]);
 259                 int o = clean ? 3 : 2;
 260                 int scrub = !strcmp(cmd, "scrub");
 261
 262                 printf("\nNAND %s: ", scrub ? "scrub" : "erase");
 263                 /* skip first two or three arguments, look for offset and size */
 264                 if (arg_off_size(argc - o, argv + o, nand, &off, &size) != 0)
 265                         return 1;
 266
 267                 memset(&opts, 0, sizeof(opts));
 268                 opts.offset = off;
 269                 opts.length = size;
 270                 opts.jffs2  = clean;
 271                 opts.quiet  = quiet;
 272
 273                 if (scrub) {
 274                         puts("Warning: "
 275                              "scrub option will erase all factory set "
 276                              "bad blocks!\n"
 277                              "         "
 278                              "There is no reliable way to recover them.\n"
 279                              "         "
 280                              "Use this command only for testing purposes "
 281                              "if you\n"
 282                              "         "
 283                              "are sure of what you are doing!\n"
 284                              "\nReally scrub this NAND flash? <y/N>\n");
 285
 286                         if (getc() == 'y' && getc() == '\r') {
 287                                 opts.scrub = 1;
 288                         } else {
 289                                 puts("scrub aborted\n");
 290                                 return -1;
 291                         }
 292                 }
 293                 ret = nand_erase_opts(nand, &opts);
 294                 printf("%s\n", ret ? "ERROR" : "OK");
 295
 296                 return ret == 0 ? 0 : 1;
 297         }
 298
 299         if (strncmp(cmd, "dump", 4) == 0) {
 300                 if (argc < 3)
 301                         goto usage;
 302
 303                 s = strchr(cmd, '.');
 304                 off = (int)simple_strtoul(argv[2], NULL, 16);
 305
 306                 if (s != NULL && strcmp(s, ".oob") == 0)
 307                         ret = nand_dump_oob(nand, off);
 308                 else
 309                         ret = nand_dump(nand, off);
 310
 311                 return ret == 0 ? 1 : 0;
 312
 313         }
 314
 315         /* read write */
 316         if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
 317                 int read;
 318
 319                 if (argc < 4)
 320                         goto usage;
 321
 322                 addr = (ulong)simple_strtoul(argv[2], NULL, 16);
 323
 324                 read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
 325                 printf("\nNAND %s: ", read ? "read" : "write");
 326                 if (arg_off_size(argc - 3, argv + 3, nand, &off, &size) != 0)
 327                         return 1;
 328
 329                 s = strchr(cmd, '.');
 330                 if (s != NULL &&
 331                     (!strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i"))) {
 332                         if (read) {
 333                                 /* read */
 334                                 nand_read_options_t opts;
 335                                 memset(&opts, 0, sizeof(opts));
 336                                 opts.buffer     = (u_char*) addr;
 337                                 opts.length     = size;
 338                                 opts.offset     = off;
 339                                 opts.quiet      = quiet;
 340                                 ret = nand_read_opts(nand, &opts);
 341                         } else {
 342                                 /* write */
 343                                 nand_write_options_t opts;
 344                                 memset(&opts, 0, sizeof(opts));
 345                                 opts.buffer     = (u_char*) addr;
 346                                 opts.length     = size;
 347                                 opts.offset     = off;
 348                                 /* opts.forcejffs2 = 1; */
 349                                 opts.pad        = 1;
 350                                 opts.blockalign = 1;
 351                                 opts.quiet      = quiet;
 352                                 ret = nand_write_opts(nand, &opts);
 353                         }
 354                 } else {
 355                         if (read)
 356                                 ret = nand_read(nand, off, &size, (u_char *)addr);
 357                         else
 358                                 ret = nand_write(nand, off, &size, (u_char *)addr);
 359                 }
 360
 361                 printf(" %d bytes %s: %s\n", size,
 362                        read ? "read" : "written", ret ? "ERROR" : "OK");
 363
 364                 return ret == 0 ? 0 : 1;
 365         }
 366
 367         if (strcmp(cmd, "markbad") == 0) {
 368                 addr = (ulong)simple_strtoul(argv[2], NULL, 16);
 369
 370                 int ret = nand->block_markbad(nand, addr);
 371                 if (ret == 0) {
 372                         printf("block 0x%08lx successfully marked as bad\n",
 373                                (ulong) addr);
 374                         return 0;
 375                 } else {
 376                         printf("block 0x%08lx NOT marked as bad! ERROR %d\n",
 377                                (ulong) addr, ret);
 378                 }
 379                 return 1;
 380         }
 381         if (strcmp(cmd, "biterr") == 0) {
 382                 /* todo */
 383                 return 1;
 384         }
 385
 386         if (strcmp(cmd, "lock") == 0) {
 387                 int tight  = 0;
 388                 int status = 0;
 389                 if (argc == 3) {
 390                         if (!strcmp("tight", argv[2]))
 391                                 tight = 1;
 392                         if (!strcmp("status", argv[2]))
 393                                 status = 1;
 394                 }
 395
 396                 if (status) {
 397                         ulong block_start = 0;
 398                         ulong off;
 399                         int last_status = -1;
 400
 401                         struct nand_chip *nand_chip = nand->priv;
 402                         /* check the WP bit */
 403                         nand_chip->cmdfunc (nand, NAND_CMD_STATUS, -1, -1);
 404                         printf("device is %swrite protected\n",
 405                                (nand_chip->read_byte(nand) & 0x80 ?
 406                                 "NOT " : "" ) );
 407
 408                         for (off = 0; off < nand->size; off += nand->oobblock) {
 409                                 int s = nand_get_lock_status(nand, off);
 410
 411                                 /* print message only if status has changed
 412                                  * or at end of chip
 413                                  */
 414                                 if (off == nand->size - nand->oobblock
 415                                     || (s != last_status && off != 0))  {
 416
 417                                         printf("%08x - %08x: %8d pages %s%s%s\n",
 418                                                block_start,
 419                                                off-1,
 420                                                (off-block_start)/nand->oobblock,
 421                                                ((last_status & NAND_LOCK_STATUS_TIGHT) ? "TIGHT " : ""),
 422                                                ((last_status & NAND_LOCK_STATUS_LOCK) ? "LOCK " : ""),
 423                                                ((last_status & NAND_LOCK_STATUS_UNLOCK) ? "UNLOCK " : ""));
 424                                 }
 425
 426                                 last_status = s;
 427                        }
 428                 } else {
 429                         if (!nand_lock(nand, tight)) {
 430                                 puts("NAND flash successfully locked\n");
 431                         } else {
 432                                 puts("Error locking NAND flash\n");
 433                                 return 1;
 434                         }
 435                 }
 436                 return 0;
 437         }
 438
 439         if (strcmp(cmd, "unlock") == 0) {
 440                 if (arg_off_size(argc - 2, argv + 2, nand, &off, &size) < 0)
 441                         return 1;
 442
 443                 if (!nand_unlock(nand, off, size)) {
 444                         puts("NAND flash successfully unlocked\n");
 445                 } else {
 446                         puts("Error unlocking NAND flash, "
 447                              "write and erase will probably fail\n");
 448                         return 1;
 449                 }
 450                 return 0;
 451         }
 452
 453 usage:
 454         printf("Usage:\n%s\n", cmdtp->usage);
 455         return 1;
 456 }
 457
 458 U_BOOT_CMD(nand, 5, 1, do_nand,
 459         "nand    - NAND sub-system\n",
 460         "info                  - show available NAND devices\n"
 461         "nand device [dev]     - show or set current device\n"
 462         "nand read[.jffs2]     - addr off|partition size\n"
 463         "nand write[.jffs2]    - addr off|partiton size - read/write `size' bytes starting\n"
 464         "    at offset `off' to/from memory address `addr'\n"
 465         "nand erase [clean] [off size] - erase `size' bytes from\n"
 466         "    offset `off' (entire device if not specified)\n"
 467         "nand bad - show bad blocks\n"
 468         "nand dump[.oob] off - dump page\n"
 469         "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
 470         "nand markbad off - mark bad block at offset (UNSAFE)\n"
 471         "nand biterr off - make a bit error at offset (UNSAFE)\n"
 472         "nand lock [tight] [status] - bring nand to lock state or display locked pages\n"
 473         "nand unlock [offset] [size] - unlock section\n");
 474
 475 static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
 476                            ulong offset, ulong addr, char *cmd)
 477 {
 478         int r;
 479         char *ep;
 480         ulong cnt;
 481         image_header_t *hdr;
 482
 483         printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset);
 484
 485         cnt = nand->oobblock;
 486         r = nand_read(nand, offset, &cnt, (u_char *) addr);
 487         if (r) {
 488                 puts("** Read error\n");
 489                 SHOW_BOOT_PROGRESS(-1);
 490                 return 1;
 491         }
 492
 493         hdr = (image_header_t *) addr;
 494
 495         if (ntohl(hdr->ih_magic) != IH_MAGIC) {
 496                 printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic);
 497                 SHOW_BOOT_PROGRESS(-1);
 498                 return 1;
 499         }
 500
 501         print_image_hdr(hdr);
 502
 503         cnt = (ntohl(hdr->ih_size) + sizeof (image_header_t));
 504
 505         r = nand_read(nand, offset, &cnt, (u_char *) addr);
 506         if (r) {
 507                 puts("** Read error\n");
 508                 SHOW_BOOT_PROGRESS(-1);
 509                 return 1;
 510         }
 511
 512         /* Loading ok, update default load address */
 513
 514         load_addr = addr;
 515
 516         /* Check if we should attempt an auto-start */
 517         if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) {
 518                 char *local_args[2];
 519                 extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
 520
 521                 local_args[0] = cmd;
 522                 local_args[1] = NULL;
 523
 524                 printf("Automatic boot of image at addr 0x%08lx ...\n", addr);
 525
 526                 do_bootm(cmdtp, 0, 1, local_args);
 527                 return 1;
 528         }
 529         return 0;
 530 }
 531
 532 int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 533 {
 534         char *boot_device = NULL;
 535         int idx;
 536         ulong addr, offset = 0;
 537 #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 538         struct mtd_device *dev;
 539         struct part_info *part;
 540         u8 pnum;
 541
 542         if (argc >= 2) {
 543                 char *p = (argc == 2) ? argv[1] : argv[2];
 544                 if (!(str2long(p, &addr)) && (mtdparts_init() == 0) &&
 545                     (find_dev_and_part(p, &dev, &pnum, &part) == 0)) {
 546                         if (dev->id->type != MTD_DEV_TYPE_NAND) {
 547                                 puts("Not a NAND device\n");
 548                                 return 1;
 549                         }
 550                         if (argc > 3)
 551                                 goto usage;
 552                         if (argc == 3)
 553                                 addr = simple_strtoul(argv[2], NULL, 16);
 554                         else
 555                                 addr = CFG_LOAD_ADDR;
 556                         return nand_load_image(cmdtp, &nand_info[dev->id->num],
 557                                                part->offset, addr, argv[0]);
 558                 }
 559         }
 560 #endif
 561
 562         switch (argc) {
 563         case 1:
 564                 addr = CFG_LOAD_ADDR;
 565                 boot_device = getenv("bootdevice");
 566                 break;
 567         case 2:
 568                 addr = simple_strtoul(argv[1], NULL, 16);
 569                 boot_device = getenv("bootdevice");
 570                 break;
 571         case 3:
 572                 addr = simple_strtoul(argv[1], NULL, 16);
 573                 boot_device = argv[2];
 574                 break;
 575         case 4:
 576                 addr = simple_strtoul(argv[1], NULL, 16);
 577                 boot_device = argv[2];
 578                 offset = simple_strtoul(argv[3], NULL, 16);
 579                 break;
 580         default:
 581 #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 582 usage:
 583 #endif
 584                 printf("Usage:\n%s\n", cmdtp->usage);
 585                 SHOW_BOOT_PROGRESS(-1);
 586                 return 1;
 587         }
 588
 589         if (!boot_device) {
 590                 puts("\n** No boot device **\n");
 591                 SHOW_BOOT_PROGRESS(-1);
 592                 return 1;
 593         }
 594
 595         idx = simple_strtoul(boot_device, NULL, 16);
 596
 597         if (idx < 0 || idx >= CFG_MAX_NAND_DEVICE || !nand_info[idx].name) {
 598                 printf("\n** Device %d not available\n", idx);
 599                 SHOW_BOOT_PROGRESS(-1);
 600                 return 1;
 601         }
 602
 603         return nand_load_image(cmdtp, &nand_info[idx], offset, addr, argv[0]);
 604 }
 605
 606 U_BOOT_CMD(nboot, 4, 1, do_nandboot,
 607         "nboot   - boot from NAND device\n",
 608         "[partition] | [[[loadAddr] dev] offset]\n");
 609
 610 #endif                          /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
 611
 612 #else /* CFG_NAND_LEGACY */
 613 /*
 614  *
 615  * Legacy NAND support - to be phased out
 616  *
 617  */
 618 #include <command.h>
 619 #include <malloc.h>
 620 #include <asm/io.h>
 621 #include <watchdog.h>
 622
 623 #ifdef CONFIG_SHOW_BOOT_PROGRESS
 624 # include <status_led.h>
 625 # define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
 626 #else
 627 # define SHOW_BOOT_PROGRESS(arg)
 628 #endif
 629
 630 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
 631 #include <linux/mtd/nand_legacy.h>
 632 #if 0
 633 #include <linux/mtd/nand_ids.h>
 634 #include <jffs2/jffs2.h>
 635 #endif
 636
 637 #ifdef CONFIG_OMAP1510
 638 void archflashwp(void *archdata, int wp);
 639 #endif
 640
 641 #define ROUND_DOWN(value,boundary)      ((value) & (~((boundary)-1)))
 642
 643 #undef  NAND_DEBUG
 644 #undef  PSYCHO_DEBUG
 645
 646 /* ****************** WARNING *********************
 647  * When ALLOW_ERASE_BAD_DEBUG is non-zero the erase command will
 648  * erase (or at least attempt to erase) blocks that are marked
 649  * bad. This can be very handy if you are _sure_ that the block
 650  * is OK, say because you marked a good block bad to test bad
 651  * block handling and you are done testing, or if you have
 652  * accidentally marked blocks bad.
 653  *
 654  * Erasing factory marked bad blocks is a _bad_ idea. If the
 655  * erase succeeds there is no reliable way to find them again,
 656  * and attempting to program or erase bad blocks can affect
 657  * the data in _other_ (good) blocks.
 658  */
 659 #define  ALLOW_ERASE_BAD_DEBUG 0
 660
 661 #define CONFIG_MTD_NAND_ECC  /* enable ECC */
 662 #define CONFIG_MTD_NAND_ECC_JFFS2
 663
 664 /* bits for nand_legacy_rw() `cmd'; or together as needed */
 665 #define NANDRW_READ     0x01
 666 #define NANDRW_WRITE    0x00
 667 #define NANDRW_JFFS2    0x02
 668 #define NANDRW_JFFS2_SKIP       0x04
 669
 670 /*
 671  * Imports from nand_legacy.c
 672  */
 673 extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
 674 extern int curr_device;
 675 extern int nand_legacy_erase(struct nand_chip *nand, size_t ofs,
 676                             size_t len, int clean);
 677 extern int nand_legacy_rw(struct nand_chip *nand, int cmd, size_t start,
 678                          size_t len, size_t *retlen, u_char *buf);
 679 extern void nand_print(struct nand_chip *nand);
 680 extern void nand_print_bad(struct nand_chip *nand);
 681 extern int nand_read_oob(struct nand_chip *nand, size_t ofs,
 682                                size_t len, size_t *retlen, u_char *buf);
 683 extern int nand_write_oob(struct nand_chip *nand, size_t ofs,
 684                                 size_t len, size_t *retlen, const u_char *buf);
 685
 686
 687 int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 688 {
 689         int rcode = 0;
 690
 691         switch (argc) {
 692         case 0:
 693         case 1:
 694                 printf ("Usage:\n%s\n", cmdtp->usage);
 695                 return 1;
 696         case 2:
 697                 if (strcmp (argv[1], "info") == 0) {
 698                         int i;
 699
 700                         putc ('\n');
 701
 702                         for (i = 0; i < CFG_MAX_NAND_DEVICE; ++i) {
 703                                 if (nand_dev_desc[i].ChipID ==
 704                                     NAND_ChipID_UNKNOWN)
 705                                         continue;       /* list only known devices */
 706                                 printf ("Device %d: ", i);
 707                                 nand_print (&nand_dev_desc[i]);
 708                         }
 709                         return 0;
 710
 711                 } else if (strcmp (argv[1], "device") == 0) {
 712                         if ((curr_device < 0)
 713                             || (curr_device >= CFG_MAX_NAND_DEVICE)) {
 714                                 puts ("\nno devices available\n");
 715                                 return 1;
 716                         }
 717                         printf ("\nDevice %d: ", curr_device);
 718                         nand_print (&nand_dev_desc[curr_device]);
 719                         return 0;
 720
 721                 } else if (strcmp (argv[1], "bad") == 0) {
 722                         if ((curr_device < 0)
 723                             || (curr_device >= CFG_MAX_NAND_DEVICE)) {
 724                                 puts ("\nno devices available\n");
 725                                 return 1;
 726                         }
 727                         printf ("\nDevice %d bad blocks:\n", curr_device);
 728                         nand_print_bad (&nand_dev_desc[curr_device]);
 729                         return 0;
 730
 731                 }
 732                 printf ("Usage:\n%s\n", cmdtp->usage);
 733                 return 1;
 734         case 3:
 735                 if (strcmp (argv[1], "device") == 0) {
 736                         int dev = (int) simple_strtoul (argv[2], NULL, 10);
 737
 738                         printf ("\nDevice %d: ", dev);
 739                         if (dev >= CFG_MAX_NAND_DEVICE) {
 740                                 puts ("unknown device\n");
 741                                 return 1;
 742                         }
 743                         nand_print (&nand_dev_desc[dev]);
 744                         /*nand_print (dev); */
 745
 746                         if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) {
 747                                 return 1;
 748                         }
 749
 750                         curr_device = dev;
 751
 752                         puts ("... is now current device\n");
 753
 754                         return 0;
 755                 } else if (strcmp (argv[1], "erase") == 0
 756                            && strcmp (argv[2], "clean") == 0) {
 757                         struct nand_chip *nand = &nand_dev_desc[curr_device];
 758                         ulong off = 0;
 759                         ulong size = nand->totlen;
 760                         int ret;
 761
 762                         printf ("\nNAND erase: device %d offset %ld, size %ld ... ", curr_device, off, size);
 763
 764                         ret = nand_legacy_erase (nand, off, size, 1);
 765
 766                         printf ("%s\n", ret ? "ERROR" : "OK");
 767
 768                         return ret;
 769                 }
 770
 771                 printf ("Usage:\n%s\n", cmdtp->usage);
 772                 return 1;
 773         default:
 774                 /* at least 4 args */
 775
 776                 if (strncmp (argv[1], "read", 4) == 0 ||
 777                     strncmp (argv[1], "write", 5) == 0) {
 778                         ulong addr = simple_strtoul (argv[2], NULL, 16);
 779                         ulong off = simple_strtoul (argv[3], NULL, 16);
 780                         ulong size = simple_strtoul (argv[4], NULL, 16);
 781                         int cmd = (strncmp (argv[1], "read", 4) == 0) ?
 782                                 NANDRW_READ : NANDRW_WRITE;
 783                         int ret, total;
 784                         char *cmdtail = strchr (argv[1], '.');
 785
 786                         if (cmdtail && !strncmp (cmdtail, ".oob", 2)) {
 787                                 /* read out-of-band data */
 788                                 if (cmd & NANDRW_READ) {
 789                                         ret = nand_read_oob (nand_dev_desc + curr_device,
 790                                                              off, size, (size_t *) & total,
 791                                                              (u_char *) addr);
 792                                 } else {
 793                                         ret = nand_write_oob (nand_dev_desc + curr_device,
 794                                                               off, size, (size_t *) & total,
 795                                                               (u_char *) addr);
 796                                 }
 797                                 return ret;
 798                         } else if (cmdtail && !strncmp (cmdtail, ".jffs2", 2))
 799                                 cmd |= NANDRW_JFFS2;    /* skip bad blocks */
 800                         else if (cmdtail && !strncmp (cmdtail, ".jffs2s", 2)) {
 801                                 cmd |= NANDRW_JFFS2;    /* skip bad blocks (on read too) */
 802                                 if (cmd & NANDRW_READ)
 803                                         cmd |= NANDRW_JFFS2_SKIP;       /* skip bad blocks (on read too) */
 804                         }
 805 #ifdef SXNI855T
 806                         /* need ".e" same as ".j" for compatibility with older units */
 807                         else if (cmdtail && !strcmp (cmdtail, ".e"))
 808                                 cmd |= NANDRW_JFFS2;    /* skip bad blocks */
 809 #endif
 810 #ifdef CFG_NAND_SKIP_BAD_DOT_I
 811                         /* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
 812                         /* ".i" for image -> read skips bad block (no 0xff) */
 813                         else if (cmdtail && !strcmp (cmdtail, ".i")) {
 814                                 cmd |= NANDRW_JFFS2;    /* skip bad blocks (on read too) */
 815                                 if (cmd & NANDRW_READ)
 816                                         cmd |= NANDRW_JFFS2_SKIP;       /* skip bad blocks (on read too) */
 817                         }
 818 #endif /* CFG_NAND_SKIP_BAD_DOT_I */
 819                         else if (cmdtail) {
 820                                 printf ("Usage:\n%s\n", cmdtp->usage);
 821                                 return 1;
 822                         }
 823
 824                         printf ("\nNAND %s: device %d offset %ld, size %ld ...\n",
 825                                 (cmd & NANDRW_READ) ? "read" : "write",
 826                                 curr_device, off, size);
 827
 828                         ret = nand_legacy_rw (nand_dev_desc + curr_device,
 829                                               cmd, off, size,
 830                                               (size_t *) & total,
 831                                               (u_char *) addr);
 832
 833                         printf (" %d bytes %s: %s\n", total,
 834                                 (cmd & NANDRW_READ) ? "read" : "written",
 835                                 ret ? "ERROR" : "OK");
 836
 837                         return ret;
 838                 } else if (strcmp (argv[1], "erase") == 0 &&
 839                            (argc == 4 || strcmp ("clean", argv[2]) == 0)) {
 840                         int clean = argc == 5;
 841                         ulong off =
 842                                 simple_strtoul (argv[2 + clean], NULL, 16);
 843                         ulong size =
 844                                 simple_strtoul (argv[3 + clean], NULL, 16);
 845                         int ret;
 846
 847                         printf ("\nNAND erase: device %d offset %ld, size %ld ...\n",
 848                                 curr_device, off, size);
 849
 850                         ret = nand_legacy_erase (nand_dev_desc + curr_device,
 851                                                  off, size, clean);
 852
 853                         printf ("%s\n", ret ? "ERROR" : "OK");
 854
 855                         return ret;
 856                 } else {
 857                         printf ("Usage:\n%s\n", cmdtp->usage);
 858                         rcode = 1;
 859                 }
 860
 861                 return rcode;
 862         }
 863 }
 864
 865 U_BOOT_CMD(
 866         nand,   5,      1,      do_nand,
 867         "nand    - legacy NAND sub-system\n",
 868         "info  - show available NAND devices\n"
 869         "nand device [dev] - show or set current device\n"
 870         "nand read[.jffs2[s]]  addr off size\n"
 871         "nand write[.jffs2] addr off size - read/write `size' bytes starting\n"
 872         "    at offset `off' to/from memory address `addr'\n"
 873         "nand erase [clean] [off size] - erase `size' bytes from\n"
 874         "    offset `off' (entire device if not specified)\n"
 875         "nand bad - show bad blocks\n"
 876         "nand read.oob addr off size - read out-of-band data\n"
 877         "nand write.oob addr off size - read out-of-band data\n"
 878 );
 879
 880 int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 881 {
 882         char *boot_device = NULL;
 883         char *ep;
 884         int dev;
 885         ulong cnt;
 886         ulong addr;
 887         ulong offset = 0;
 888         image_header_t *hdr;
 889         int rcode = 0;
 890         switch (argc) {
 891         case 1:
 892                 addr = CFG_LOAD_ADDR;
 893                 boot_device = getenv ("bootdevice");
 894                 break;
 895         case 2:
 896                 addr = simple_strtoul(argv[1], NULL, 16);
 897                 boot_device = getenv ("bootdevice");
 898                 break;
 899         case 3:
 900                 addr = simple_strtoul(argv[1], NULL, 16);
 901                 boot_device = argv[2];
 902                 break;
 903         case 4:
 904                 addr = simple_strtoul(argv[1], NULL, 16);
 905                 boot_device = argv[2];
 906                 offset = simple_strtoul(argv[3], NULL, 16);
 907                 break;
 908         default:
 909                 printf ("Usage:\n%s\n", cmdtp->usage);
 910                 SHOW_BOOT_PROGRESS (-1);
 911                 return 1;
 912         }
 913
 914         if (!boot_device) {
 915                 puts ("\n** No boot device **\n");
 916                 SHOW_BOOT_PROGRESS (-1);
 917                 return 1;
 918         }
 919
 920         dev = simple_strtoul(boot_device, &ep, 16);
 921
 922         if ((dev >= CFG_MAX_NAND_DEVICE) ||
 923             (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) {
 924                 printf ("\n** Device %d not available\n", dev);
 925                 SHOW_BOOT_PROGRESS (-1);
 926                 return 1;
 927         }
 928
 929         printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n",
 930                 dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR,
 931                 offset);
 932
 933         if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset,
 934                         SECTORSIZE, NULL, (u_char *)addr)) {
 935                 printf ("** Read error on %d\n", dev);
 936                 SHOW_BOOT_PROGRESS (-1);
 937                 return 1;
 938         }
 939
 940         hdr = (image_header_t *)addr;
 941
 942         if (ntohl(hdr->ih_magic) == IH_MAGIC) {
 943
 944                 print_image_hdr (hdr);
 945
 946                 cnt = (ntohl(hdr->ih_size) + sizeof(image_header_t));
 947                 cnt -= SECTORSIZE;
 948         } else {
 949                 printf ("\n** Bad Magic Number 0x%x **\n", ntohl(hdr->ih_magic));
 950                 SHOW_BOOT_PROGRESS (-1);
 951                 return 1;
 952         }
 953
 954         if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ,
 955                         offset + SECTORSIZE, cnt, NULL,
 956                         (u_char *)(addr+SECTORSIZE))) {
 957                 printf ("** Read error on %d\n", dev);
 958                 SHOW_BOOT_PROGRESS (-1);
 959                 return 1;
 960         }
 961
 962         /* Loading ok, update default load address */
 963
 964         load_addr = addr;
 965
 966         /* Check if we should attempt an auto-start */
 967         if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) {
 968                 char *local_args[2];
 969                 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
 970
 971                 local_args[0] = argv[0];
 972                 local_args[1] = NULL;
 973
 974                 printf ("Automatic boot of image at addr 0x%08lx ...\n", addr);
 975
 976                 do_bootm (cmdtp, 0, 1, local_args);
 977                 rcode = 1;
 978         }
 979         return rcode;
 980 }
 981
 982 U_BOOT_CMD(
 983         nboot,  4,      1,      do_nandboot,
 984         "nboot   - boot from NAND device\n",
 985         "loadAddr dev\n"
 986 );
 987
 988 #endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
 989
 990 #endif /* CFG_NAND_LEGACY */