powerpc/corenet_ds: Slave uploads ucode when boot from SRIO

[u-boot] / common / cmd_pxe.c

/*
 * Copyright 2010-2011 Calxeda, Inc.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program.  If not, see <http://www.gnu.org/licenses/>.
 */
#include <common.h>
#include <command.h>
#include <malloc.h>
#include <linux/string.h>
#include <linux/ctype.h>
#include <errno.h>
#include <linux/list.h>

#include "menu.h"

#define MAX_TFTP_PATH_LEN 127


/*
 * Like getenv, but prints an error if envvar isn't defined in the
 * environment.  It always returns what getenv does, so it can be used in
 * place of getenv without changing error handling otherwise.
 */
static char *from_env(char *envvar)
{
        char *ret;

        ret = getenv(envvar);

        if (!ret)
                printf("missing environment variable: %s\n", envvar);

        return ret;
}

/*
 * Convert an ethaddr from the environment to the format used by pxelinux
 * filenames based on mac addresses. Convert's ':' to '-', and adds "01-" to
 * the beginning of the ethernet address to indicate a hardware type of
 * Ethernet. Also converts uppercase hex characters into lowercase, to match
 * pxelinux's behavior.
 *
 * Returns 1 for success, -ENOENT if 'ethaddr' is undefined in the
 * environment, or some other value < 0 on error.
 */
static int format_mac_pxe(char *outbuf, size_t outbuf_len)
{
        size_t ethaddr_len;
        char *p, *ethaddr;

        ethaddr = from_env("ethaddr");

        if (!ethaddr)
                return -ENOENT;

        ethaddr_len = strlen(ethaddr);

        /*
         * ethaddr_len + 4 gives room for "01-", ethaddr, and a NUL byte at
         * the end.
         */
        if (outbuf_len < ethaddr_len + 4) {
                printf("outbuf is too small (%d < %d)\n",
                                outbuf_len, ethaddr_len + 4);

                return -EINVAL;
        }

        strcpy(outbuf, "01-");

        for (p = outbuf + 3; *ethaddr; ethaddr++, p++) {
                if (*ethaddr == ':')
                        *p = '-';
                else
                        *p = tolower(*ethaddr);
        }

        *p = '\0';

        return 1;
}

/*
 * Returns the directory the file specified in the bootfile env variable is
 * in. If bootfile isn't defined in the environment, return NULL, which should
 * be interpreted as "don't prepend anything to paths".
 */
static int get_bootfile_path(char *bootfile_path, size_t bootfile_path_size)
{
        char *bootfile, *last_slash;
        size_t path_len;

        bootfile = from_env("bootfile");

        if (!bootfile) {
                bootfile_path[0] = '\0';
                return 1;
        }

        last_slash = strrchr(bootfile, '/');

        if (last_slash == NULL) {
                bootfile_path[0] = '\0';
                return 1;
        }

        path_len = (last_slash - bootfile) + 1;

        if (bootfile_path_size < path_len) {
                printf("bootfile_path too small. (%d < %d)\n",
                                bootfile_path_size, path_len);

                return -1;
        }

        strncpy(bootfile_path, bootfile, path_len);

        bootfile_path[path_len] = '\0';

        return 1;
}

/*
 * As in pxelinux, paths to files referenced from files we retrieve are
 * relative to the location of bootfile. get_relfile takes such a path and
 * joins it with the bootfile path to get the full path to the target file. If
 * the bootfile path is NULL, we use file_path as is.
 *
 * Returns 1 for success, or < 0 on error.
 */
static int get_relfile(char *file_path, void *file_addr)
{
        size_t path_len;
        char relfile[MAX_TFTP_PATH_LEN+1];
        char addr_buf[10];
        char *tftp_argv[] = {"tftp", NULL, NULL, NULL};
        int err;

        err = get_bootfile_path(relfile, sizeof(relfile));

        if (err < 0)
                return err;

        path_len = strlen(file_path);
        path_len += strlen(relfile);

        if (path_len > MAX_TFTP_PATH_LEN) {
                printf("Base path too long (%s%s)\n",
                                        relfile,
                                        file_path);

                return -ENAMETOOLONG;
        }

        strcat(relfile, file_path);

        printf("Retrieving file: %s\n", relfile);

        sprintf(addr_buf, "%p", file_addr);

        tftp_argv[1] = addr_buf;
        tftp_argv[2] = relfile;

        if (do_tftpb(NULL, 0, 3, tftp_argv))
                return -ENOENT;

        return 1;
}

/*
 * Retrieve the file at 'file_path' to the locate given by 'file_addr'. If
 * 'bootfile' was specified in the environment, the path to bootfile will be
 * prepended to 'file_path' and the resulting path will be used.
 *
 * Returns 1 on success, or < 0 for error.
 */
static int get_pxe_file(char *file_path, void *file_addr)
{
        unsigned long config_file_size;
        char *tftp_filesize;
        int err;

        err = get_relfile(file_path, file_addr);

        if (err < 0)
                return err;

        /*
         * the file comes without a NUL byte at the end, so find out its size
         * and add the NUL byte.
         */
        tftp_filesize = from_env("filesize");

        if (!tftp_filesize)
                return -ENOENT;

        if (strict_strtoul(tftp_filesize, 16, &config_file_size) < 0)
                return -EINVAL;

        *(char *)(file_addr + config_file_size) = '\0';

        return 1;
}

#define PXELINUX_DIR "pxelinux.cfg/"

/*
 * Retrieves a file in the 'pxelinux.cfg' folder. Since this uses get_pxe_file
 * to do the hard work, the location of the 'pxelinux.cfg' folder is generated
 * from the bootfile path, as described above.
 *
 * Returns 1 on success or < 0 on error.
 */
static int get_pxelinux_path(char *file, void *pxefile_addr_r)
{
        size_t base_len = strlen(PXELINUX_DIR);
        char path[MAX_TFTP_PATH_LEN+1];

        if (base_len + strlen(file) > MAX_TFTP_PATH_LEN) {
                printf("path (%s%s) too long, skipping\n",
                                PXELINUX_DIR, file);
                return -ENAMETOOLONG;
        }

        sprintf(path, PXELINUX_DIR "%s", file);

        return get_pxe_file(path, pxefile_addr_r);
}

/*
 * Looks for a pxe file with a name based on the pxeuuid environment variable.
 *
 * Returns 1 on success or < 0 on error.
 */
static int pxe_uuid_path(void *pxefile_addr_r)
{
        char *uuid_str;

        uuid_str = from_env("pxeuuid");

        if (!uuid_str)
                return -ENOENT;

        return get_pxelinux_path(uuid_str, pxefile_addr_r);
}

/*
 * Looks for a pxe file with a name based on the 'ethaddr' environment
 * variable.
 *
 * Returns 1 on success or < 0 on error.
 */
static int pxe_mac_path(void *pxefile_addr_r)
{
        char mac_str[21];
        int err;

        err = format_mac_pxe(mac_str, sizeof(mac_str));

        if (err < 0)
                return err;

        return get_pxelinux_path(mac_str, pxefile_addr_r);
}

/*
 * Looks for pxe files with names based on our IP address. See pxelinux
 * documentation for details on what these file names look like.  We match
 * that exactly.
 *
 * Returns 1 on success or < 0 on error.
 */
static int pxe_ipaddr_paths(void *pxefile_addr_r)
{
        char ip_addr[9];
        int mask_pos, err;

        sprintf(ip_addr, "%08X", ntohl(NetOurIP));

        for (mask_pos = 7; mask_pos >= 0;  mask_pos--) {
                err = get_pxelinux_path(ip_addr, pxefile_addr_r);

                if (err > 0)
                        return err;

                ip_addr[mask_pos] = '\0';
        }

        return -ENOENT;
}

/*
 * Entry point for the 'pxe get' command.
 * This Follows pxelinux's rules to download a config file from a tftp server.
 * The file is stored at the location given by the pxefile_addr_r environment
 * variable, which must be set.
 *
 * UUID comes from pxeuuid env variable, if defined
 * MAC addr comes from ethaddr env variable, if defined
 * IP
 *
 * see http://syslinux.zytor.com/wiki/index.php/PXELINUX
 *
 * Returns 0 on success or 1 on error.
 */
static int
do_pxe_get(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
        char *pxefile_addr_str;
        unsigned long pxefile_addr_r;
        int err;

        if (argc != 1)
                return CMD_RET_USAGE;


        pxefile_addr_str = from_env("pxefile_addr_r");

        if (!pxefile_addr_str)
                return 1;

        err = strict_strtoul(pxefile_addr_str, 16,
                                (unsigned long *)&pxefile_addr_r);
        if (err < 0)
                return 1;

        /*
         * Keep trying paths until we successfully get a file we're looking
         * for.
         */
        if (pxe_uuid_path((void *)pxefile_addr_r) > 0
                || pxe_mac_path((void *)pxefile_addr_r) > 0
                || pxe_ipaddr_paths((void *)pxefile_addr_r) > 0
                || get_pxelinux_path("default", (void *)pxefile_addr_r) > 0) {

                printf("Config file found\n");

                return 0;
        }

        printf("Config file not found\n");

        return 1;
}

/*
 * Wrapper to make it easier to store the file at file_path in the location
 * specified by envaddr_name. file_path will be joined to the bootfile path,
 * if any is specified.
 *
 * Returns 1 on success or < 0 on error.
 */
static int get_relfile_envaddr(char *file_path, char *envaddr_name)
{
        unsigned long file_addr;
        char *envaddr;

        envaddr = from_env(envaddr_name);

        if (!envaddr)
                return -ENOENT;

        if (strict_strtoul(envaddr, 16, &file_addr) < 0)
                return -EINVAL;

        return get_relfile(file_path, (void *)file_addr);
}

/*
 * A note on the pxe file parser.
 *
 * We're parsing files that use syslinux grammar, which has a few quirks.
 * String literals must be recognized based on context - there is no
 * quoting or escaping support. There's also nothing to explicitly indicate
 * when a label section completes. We deal with that by ending a label
 * section whenever we see a line that doesn't include.
 *
 * As with the syslinux family, this same file format could be reused in the
 * future for non pxe purposes. The only action it takes during parsing that
 * would throw this off is handling of include files. It assumes we're using
 * pxe, and does a tftp download of a file listed as an include file in the
 * middle of the parsing operation. That could be handled by refactoring it to
 * take a 'include file getter' function.
 */

/*
 * Describes a single label given in a pxe file.
 *
 * Create these with the 'label_create' function given below.
 *
 * name - the name of the menu as given on the 'menu label' line.
 * kernel - the path to the kernel file to use for this label.
 * append - kernel command line to use when booting this label
 * initrd - path to the initrd to use for this label.
 * attempted - 0 if we haven't tried to boot this label, 1 if we have.
 * localboot - 1 if this label specified 'localboot', 0 otherwise.
 * list - lets these form a list, which a pxe_menu struct will hold.
 */
struct pxe_label {
        char *name;
        char *kernel;
        char *append;
        char *initrd;
        int attempted;
        int localboot;
        struct list_head list;
};

/*
 * Describes a pxe menu as given via pxe files.
 *
 * title - the name of the menu as given by a 'menu title' line.
 * default_label - the name of the default label, if any.
 * timeout - time in tenths of a second to wait for a user key-press before
 *           booting the default label.
 * prompt - if 0, don't prompt for a choice unless the timeout period is
 *          interrupted.  If 1, always prompt for a choice regardless of
 *          timeout.
 * labels - a list of labels defined for the menu.
 */
struct pxe_menu {
        char *title;
        char *default_label;
        int timeout;
        int prompt;
        struct list_head labels;
};

/*
 * Allocates memory for and initializes a pxe_label. This uses malloc, so the
 * result must be free()'d to reclaim the memory.
 *
 * Returns NULL if malloc fails.
 */
static struct pxe_label *label_create(void)
{
        struct pxe_label *label;

        label = malloc(sizeof(struct pxe_label));

        if (!label)
                return NULL;

        memset(label, 0, sizeof(struct pxe_label));

        return label;
}

/*
 * Free the memory used by a pxe_label, including that used by its name,
 * kernel, append and initrd members, if they're non NULL.
 *
 * So - be sure to only use dynamically allocated memory for the members of
 * the pxe_label struct, unless you want to clean it up first. These are
 * currently only created by the pxe file parsing code.
 */
static void label_destroy(struct pxe_label *label)
{
        if (label->name)
                free(label->name);

        if (label->kernel)
                free(label->kernel);

        if (label->append)
                free(label->append);

        if (label->initrd)
                free(label->initrd);

        free(label);
}

/*
 * Print a label and its string members if they're defined.
 *
 * This is passed as a callback to the menu code for displaying each
 * menu entry.
 */
static void label_print(void *data)
{
        struct pxe_label *label = data;

        printf("Label: %s\n", label->name);

        if (label->kernel)
                printf("\tkernel: %s\n", label->kernel);

        if (label->append)
                printf("\tappend: %s\n", label->append);

        if (label->initrd)
                printf("\tinitrd: %s\n", label->initrd);
}

/*
 * Boot a label that specified 'localboot'. This requires that the 'localcmd'
 * environment variable is defined. Its contents will be executed as U-boot
 * command.  If the label specified an 'append' line, its contents will be
 * used to overwrite the contents of the 'bootargs' environment variable prior
 * to running 'localcmd'.
 *
 * Returns 1 on success or < 0 on error.
 */
static int label_localboot(struct pxe_label *label)
{
        char *localcmd, *dupcmd;
        int ret;

        localcmd = from_env("localcmd");

        if (!localcmd)
                return -ENOENT;

        /*
         * dup the command to avoid any issues with the version of it existing
         * in the environment changing during the execution of the command.
         */
        dupcmd = strdup(localcmd);

        if (!dupcmd)
                return -ENOMEM;

        if (label->append)
                setenv("bootargs", label->append);

        printf("running: %s\n", dupcmd);

        ret = run_command(dupcmd, 0);

        free(dupcmd);

        return ret;
}

/*
 * Boot according to the contents of a pxe_label.
 *
 * If we can't boot for any reason, we return.  A successful boot never
 * returns.
 *
 * The kernel will be stored in the location given by the 'kernel_addr_r'
 * environment variable.
 *
 * If the label specifies an initrd file, it will be stored in the location
 * given by the 'ramdisk_addr_r' environment variable.
 *
 * If the label specifies an 'append' line, its contents will overwrite that
 * of the 'bootargs' environment variable.
 */
static void label_boot(struct pxe_label *label)
{
        char *bootm_argv[] = { "bootm", NULL, NULL, NULL, NULL };
        int bootm_argc = 3;

        label_print(label);

        label->attempted = 1;

        if (label->localboot) {
                label_localboot(label);
                return;
        }

        if (label->kernel == NULL) {
                printf("No kernel given, skipping %s\n",
                                label->name);
                return;
        }

        if (label->initrd) {
                if (get_relfile_envaddr(label->initrd, "ramdisk_addr_r") < 0) {
                        printf("Skipping %s for failure retrieving initrd\n",
                                        label->name);
                        return;
                }

                bootm_argv[2] = getenv("ramdisk_addr_r");
        } else {
                bootm_argv[2] = "-";
        }

        if (get_relfile_envaddr(label->kernel, "kernel_addr_r") < 0) {
                printf("Skipping %s for failure retrieving kernel\n",
                                label->name);
                return;
        }

        if (label->append)
                setenv("bootargs", label->append);

        bootm_argv[1] = getenv("kernel_addr_r");

        /*
         * fdt usage is optional.  If there is an fdt_addr specified, we will
         * pass it along to bootm, and adjust argc appropriately.
         */
        bootm_argv[3] = getenv("fdt_addr");

        if (bootm_argv[3])
                bootm_argc = 4;

        do_bootm(NULL, 0, bootm_argc, bootm_argv);
}

/*
 * Tokens for the pxe file parser.
 */
enum token_type {
        T_EOL,
        T_STRING,
        T_EOF,
        T_MENU,
        T_TITLE,
        T_TIMEOUT,
        T_LABEL,
        T_KERNEL,
        T_APPEND,
        T_INITRD,
        T_LOCALBOOT,
        T_DEFAULT,
        T_PROMPT,
        T_INCLUDE,
        T_INVALID
};

/*
 * A token - given by a value and a type.
 */
struct token {
        char *val;
        enum token_type type;
};

/*
 * Keywords recognized.
 */
static const struct token keywords[] = {
        {"menu", T_MENU},
        {"title", T_TITLE},
        {"timeout", T_TIMEOUT},
        {"default", T_DEFAULT},
        {"prompt", T_PROMPT},
        {"label", T_LABEL},
        {"kernel", T_KERNEL},
        {"localboot", T_LOCALBOOT},
        {"append", T_APPEND},
        {"initrd", T_INITRD},
        {"include", T_INCLUDE},
        {NULL, T_INVALID}
};

/*
 * Since pxe(linux) files don't have a token to identify the start of a
 * literal, we have to keep track of when we're in a state where a literal is
 * expected vs when we're in a state a keyword is expected.
 */
enum lex_state {
        L_NORMAL = 0,
        L_KEYWORD,
        L_SLITERAL
};

/*
 * get_string retrieves a string from *p and stores it as a token in
 * *t.
 *
 * get_string used for scanning both string literals and keywords.
 *
 * Characters from *p are copied into t-val until a character equal to
 * delim is found, or a NUL byte is reached. If delim has the special value of
 * ' ', any whitespace character will be used as a delimiter.
 *
 * If lower is unequal to 0, uppercase characters will be converted to
 * lowercase in the result. This is useful to make keywords case
 * insensitive.
 *
 * The location of *p is updated to point to the first character after the end
 * of the token - the ending delimiter.
 *
 * On success, the new value of t->val is returned. Memory for t->val is
 * allocated using malloc and must be free()'d to reclaim it.  If insufficient
 * memory is available, NULL is returned.
 */
static char *get_string(char **p, struct token *t, char delim, int lower)
{
        char *b, *e;
        size_t len, i;

        /*
         * b and e both start at the beginning of the input stream.
         *
         * e is incremented until we find the ending delimiter, or a NUL byte
         * is reached. Then, we take e - b to find the length of the token.
         */
        b = e = *p;

        while (*e) {
                if ((delim == ' ' && isspace(*e)) || delim == *e)
                        break;
                e++;
        }

        len = e - b;

        /*
         * Allocate memory to hold the string, and copy it in, converting
         * characters to lowercase if lower is != 0.
         */
        t->val = malloc(len + 1);
        if (!t->val)
                return NULL;

        for (i = 0; i < len; i++, b++) {
                if (lower)
                        t->val[i] = tolower(*b);
                else
                        t->val[i] = *b;
        }

        t->val[len] = '\0';

        /*
         * Update *p so the caller knows where to continue scanning.
         */
        *p = e;

        t->type = T_STRING;

        return t->val;
}

/*
 * Populate a keyword token with a type and value.
 */
static void get_keyword(struct token *t)
{
        int i;

        for (i = 0; keywords[i].val; i++) {
                if (!strcmp(t->val, keywords[i].val)) {
                        t->type = keywords[i].type;
                        break;
                }
        }
}

/*
 * Get the next token.  We have to keep track of which state we're in to know
 * if we're looking to get a string literal or a keyword.
 *
 * *p is updated to point at the first character after the current token.
 */
static void get_token(char **p, struct token *t, enum lex_state state)
{
        char *c = *p;

        t->type = T_INVALID;

        /* eat non EOL whitespace */
        while (isblank(*c))
                c++;

        /*
         * eat comments. note that string literals can't begin with #, but
         * can contain a # after their first character.
         */
        if (*c == '#') {
                while (*c && *c != '\n')
                        c++;
        }

        if (*c == '\n') {
                t->type = T_EOL;
                c++;
        } else if (*c == '\0') {
                t->type = T_EOF;
                c++;
        } else if (state == L_SLITERAL) {
                get_string(&c, t, '\n', 0);
        } else if (state == L_KEYWORD) {
                /*
                 * when we expect a keyword, we first get the next string
                 * token delimited by whitespace, and then check if it
                 * matches a keyword in our keyword list. if it does, it's
                 * converted to a keyword token of the appropriate type, and
                 * if not, it remains a string token.
                 */
                get_string(&c, t, ' ', 1);
                get_keyword(t);
        }

        *p = c;
}

/*
 * Increment *c until we get to the end of the current line, or EOF.
 */
static void eol_or_eof(char **c)
{
        while (**c && **c != '\n')
                (*c)++;
}

/*
 * All of these parse_* functions share some common behavior.
 *
 * They finish with *c pointing after the token they parse, and return 1 on
 * success, or < 0 on error.
 */

/*
 * Parse a string literal and store a pointer it at *dst. String literals
 * terminate at the end of the line.
 */
static int parse_sliteral(char **c, char **dst)
{
        struct token t;
        char *s = *c;

        get_token(c, &t, L_SLITERAL);

        if (t.type != T_STRING) {
                printf("Expected string literal: %.*s\n", (int)(*c - s), s);
                return -EINVAL;
        }

        *dst = t.val;

        return 1;
}

/*
 * Parse a base 10 (unsigned) integer and store it at *dst.
 */
static int parse_integer(char **c, int *dst)
{
        struct token t;
        char *s = *c;
        unsigned long temp;

        get_token(c, &t, L_SLITERAL);

        if (t.type != T_STRING) {
                printf("Expected string: %.*s\n", (int)(*c - s), s);
                return -EINVAL;
        }

        if (strict_strtoul(t.val, 10, &temp) < 0) {
                printf("Expected unsigned integer: %s\n", t.val);
                return -EINVAL;
        }

        *dst = (int)temp;

        free(t.val);

        return 1;
}

static int parse_pxefile_top(char *p, struct pxe_menu *cfg, int nest_level);

/*
 * Parse an include statement, and retrieve and parse the file it mentions.
 *
 * base should point to a location where it's safe to store the file, and
 * nest_level should indicate how many nested includes have occurred. For this
 * include, nest_level has already been incremented and doesn't need to be
 * incremented here.
 */
static int handle_include(char **c, char *base,
                                struct pxe_menu *cfg, int nest_level)
{
        char *include_path;
        char *s = *c;
        int err;

        err = parse_sliteral(c, &include_path);

        if (err < 0) {
                printf("Expected include path: %.*s\n",
                                 (int)(*c - s), s);
                return err;
        }

        err = get_pxe_file(include_path, base);

        if (err < 0) {
                printf("Couldn't retrieve %s\n", include_path);
                return err;
        }

        return parse_pxefile_top(base, cfg, nest_level);
}

/*
 * Parse lines that begin with 'menu'.
 *
 * b and nest are provided to handle the 'menu include' case.
 *
 * b should be the address where the file currently being parsed is stored.
 *
 * nest_level should be 1 when parsing the top level pxe file, 2 when parsing
 * a file it includes, 3 when parsing a file included by that file, and so on.
 */
static int parse_menu(char **c, struct pxe_menu *cfg, char *b, int nest_level)
{
        struct token t;
        char *s = *c;
        int err = 0;

        get_token(c, &t, L_KEYWORD);

        switch (t.type) {
        case T_TITLE:
                err = parse_sliteral(c, &cfg->title);

                break;

        case T_INCLUDE:
                err = handle_include(c, b + strlen(b) + 1, cfg,
                                                nest_level + 1);
                break;

        default:
                printf("Ignoring malformed menu command: %.*s\n",
                                (int)(*c - s), s);
        }

        if (err < 0)
                return err;

        eol_or_eof(c);

        return 1;
}

/*
 * Handles parsing a 'menu line' when we're parsing a label.
 */
static int parse_label_menu(char **c, struct pxe_menu *cfg,
                                struct pxe_label *label)
{
        struct token t;
        char *s;

        s = *c;

        get_token(c, &t, L_KEYWORD);

        switch (t.type) {
        case T_DEFAULT:
                if (cfg->default_label)
                        free(cfg->default_label);

                cfg->default_label = strdup(label->name);

                if (!cfg->default_label)
                        return -ENOMEM;

                break;
        default:
                printf("Ignoring malformed menu command: %.*s\n",
                                (int)(*c - s), s);
        }

        eol_or_eof(c);

        return 0;
}

/*
 * Parses a label and adds it to the list of labels for a menu.
 *
 * A label ends when we either get to the end of a file, or
 * get some input we otherwise don't have a handler defined
 * for.
 *
 */
static int parse_label(char **c, struct pxe_menu *cfg)
{
        struct token t;
        char *s = *c;
        struct pxe_label *label;
        int err;

        label = label_create();
        if (!label)
                return -ENOMEM;

        err = parse_sliteral(c, &label->name);
        if (err < 0) {
                printf("Expected label name: %.*s\n", (int)(*c - s), s);
                label_destroy(label);
                return -EINVAL;
        }

        list_add_tail(&label->list, &cfg->labels);

        while (1) {
                s = *c;
                get_token(c, &t, L_KEYWORD);

                err = 0;
                switch (t.type) {
                case T_MENU:
                        err = parse_label_menu(c, cfg, label);
                        break;

                case T_KERNEL:
                        err = parse_sliteral(c, &label->kernel);
                        break;

                case T_APPEND:
                        err = parse_sliteral(c, &label->append);
                        break;

                case T_INITRD:
                        err = parse_sliteral(c, &label->initrd);
                        break;

                case T_LOCALBOOT:
                        err = parse_integer(c, &label->localboot);
                        break;

                case T_EOL:
                        break;

                default:
                        /*
                         * put the token back! we don't want it - it's the end
                         * of a label and whatever token this is, it's
                         * something for the menu level context to handle.
                         */
                        *c = s;
                        return 1;
                }

                if (err < 0)
                        return err;
        }
}

/*
 * This 16 comes from the limit pxelinux imposes on nested includes.
 *
 * There is no reason at all we couldn't do more, but some limit helps prevent
 * infinite (until crash occurs) recursion if a file tries to include itself.
 */
#define MAX_NEST_LEVEL 16

/*
 * Entry point for parsing a menu file. nest_level indicates how many times
 * we've nested in includes.  It will be 1 for the top level menu file.
 *
 * Returns 1 on success, < 0 on error.
 */
static int parse_pxefile_top(char *p, struct pxe_menu *cfg, int nest_level)
{
        struct token t;
        char *s, *b, *label_name;
        int err;

        b = p;

        if (nest_level > MAX_NEST_LEVEL) {
                printf("Maximum nesting (%d) exceeded\n", MAX_NEST_LEVEL);
                return -EMLINK;
        }

        while (1) {
                s = p;

                get_token(&p, &t, L_KEYWORD);

                err = 0;
                switch (t.type) {
                case T_MENU:
                        err = parse_menu(&p, cfg, b, nest_level);
                        break;

                case T_TIMEOUT:
                        err = parse_integer(&p, &cfg->timeout);
                        break;

                case T_LABEL:
                        err = parse_label(&p, cfg);
                        break;

                case T_DEFAULT:
                        err = parse_sliteral(&p, &label_name);

                        if (label_name) {
                                if (cfg->default_label)
                                        free(cfg->default_label);

                                cfg->default_label = label_name;
                        }

                        break;

                case T_PROMPT:
                        err = parse_integer(&p, &cfg->prompt);
                        break;

                case T_EOL:
                        break;

                case T_EOF:
                        return 1;

                default:
                        printf("Ignoring unknown command: %.*s\n",
                                                        (int)(p - s), s);
                        eol_or_eof(&p);
                }

                if (err < 0)
                        return err;
        }
}

/*
 * Free the memory used by a pxe_menu and its labels.
 */
static void destroy_pxe_menu(struct pxe_menu *cfg)
{
        struct list_head *pos, *n;
        struct pxe_label *label;

        if (cfg->title)
                free(cfg->title);

        if (cfg->default_label)
                free(cfg->default_label);

        list_for_each_safe(pos, n, &cfg->labels) {
                label = list_entry(pos, struct pxe_label, list);

                label_destroy(label);
        }

        free(cfg);
}

/*
 * Entry point for parsing a pxe file. This is only used for the top level
 * file.
 *
 * Returns NULL if there is an error, otherwise, returns a pointer to a
 * pxe_menu struct populated with the results of parsing the pxe file (and any
 * files it includes). The resulting pxe_menu struct can be free()'d by using
 * the destroy_pxe_menu() function.
 */
static struct pxe_menu *parse_pxefile(char *menucfg)
{
        struct pxe_menu *cfg;

        cfg = malloc(sizeof(struct pxe_menu));

        if (!cfg)
                return NULL;

        memset(cfg, 0, sizeof(struct pxe_menu));

        INIT_LIST_HEAD(&cfg->labels);

        if (parse_pxefile_top(menucfg, cfg, 1) < 0) {
                destroy_pxe_menu(cfg);
                return NULL;
        }

        return cfg;
}

/*
 * Converts a pxe_menu struct into a menu struct for use with U-boot's generic
 * menu code.
 */
static struct menu *pxe_menu_to_menu(struct pxe_menu *cfg)
{
        struct pxe_label *label;
        struct list_head *pos;
        struct menu *m;
        int err;

        /*
         * Create a menu and add items for all the labels.
         */
        m = menu_create(cfg->title, cfg->timeout, cfg->prompt, label_print);

        if (!m)
                return NULL;

        list_for_each(pos, &cfg->labels) {
                label = list_entry(pos, struct pxe_label, list);

                if (menu_item_add(m, label->name, label) != 1) {
                        menu_destroy(m);
                        return NULL;
                }
        }

        /*
         * After we've created items for each label in the menu, set the
         * menu's default label if one was specified.
         */
        if (cfg->default_label) {
                err = menu_default_set(m, cfg->default_label);
                if (err != 1) {
                        if (err != -ENOENT) {
                                menu_destroy(m);
                                return NULL;
                        }

                        printf("Missing default: %s\n", cfg->default_label);
                }
        }

        return m;
}

/*
 * Try to boot any labels we have yet to attempt to boot.
 */
static void boot_unattempted_labels(struct pxe_menu *cfg)
{
        struct list_head *pos;
        struct pxe_label *label;

        list_for_each(pos, &cfg->labels) {
                label = list_entry(pos, struct pxe_label, list);

                if (!label->attempted)
                        label_boot(label);
        }
}

/*
 * Boot the system as prescribed by a pxe_menu.
 *
 * Use the menu system to either get the user's choice or the default, based
 * on config or user input.  If there is no default or user's choice,
 * attempted to boot labels in the order they were given in pxe files.
 * If the default or user's choice fails to boot, attempt to boot other
 * labels in the order they were given in pxe files.
 *
 * If this function returns, there weren't any labels that successfully
 * booted, or the user interrupted the menu selection via ctrl+c.
 */
static void handle_pxe_menu(struct pxe_menu *cfg)
{
        void *choice;
        struct menu *m;
        int err;

        m = pxe_menu_to_menu(cfg);
        if (!m)
                return;

        err = menu_get_choice(m, &choice);

        menu_destroy(m);

        /*
         * err == 1 means we got a choice back from menu_get_choice.
         *
         * err == -ENOENT if the menu was setup to select the default but no
         * default was set. in that case, we should continue trying to boot
         * labels that haven't been attempted yet.
         *
         * otherwise, the user interrupted or there was some other error and
         * we give up.
         */

        if (err == 1)
                label_boot(choice);
        else if (err != -ENOENT)
                return;

        boot_unattempted_labels(cfg);
}

/*
 * Boots a system using a pxe file
 *
 * Returns 0 on success, 1 on error.
 */
static int
do_pxe_boot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
        unsigned long pxefile_addr_r;
        struct pxe_menu *cfg;
        char *pxefile_addr_str;

        if (argc == 1) {
                pxefile_addr_str = from_env("pxefile_addr_r");
                if (!pxefile_addr_str)
                        return 1;

        } else if (argc == 2) {
                pxefile_addr_str = argv[1];
        } else {
                return CMD_RET_USAGE;
        }

        if (strict_strtoul(pxefile_addr_str, 16, &pxefile_addr_r) < 0) {
                printf("Invalid pxefile address: %s\n", pxefile_addr_str);
                return 1;
        }

        cfg = parse_pxefile((char *)(pxefile_addr_r));

        if (cfg == NULL) {
                printf("Error parsing config file\n");
                return 1;
        }

        handle_pxe_menu(cfg);

        destroy_pxe_menu(cfg);

        return 0;
}

static cmd_tbl_t cmd_pxe_sub[] = {
        U_BOOT_CMD_MKENT(get, 1, 1, do_pxe_get, "", ""),
        U_BOOT_CMD_MKENT(boot, 2, 1, do_pxe_boot, "", "")
};

int do_pxe(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
        cmd_tbl_t *cp;

        if (argc < 2)
                return CMD_RET_USAGE;

        /* drop initial "pxe" arg */
        argc--;
        argv++;

        cp = find_cmd_tbl(argv[0], cmd_pxe_sub, ARRAY_SIZE(cmd_pxe_sub));

        if (cp)
                return cp->cmd(cmdtp, flag, argc, argv);

        return CMD_RET_USAGE;
}

U_BOOT_CMD(
        pxe, 3, 1, do_pxe,
        "commands to get and boot from pxe files",
        "get - try to retrieve a pxe file using tftp\npxe "
        "boot [pxefile_addr_r] - boot from the pxe file at pxefile_addr_r\n"
);