git.sur5r.net Git - u-boot/blob - common/spl/spl.c

   1 /*
   2  * (C) Copyright 2010
   3  * Texas Instruments, <www.ti.com>
   4  *
   5  * Aneesh V <aneesh@ti.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9 #include <common.h>
  10 #include <dm.h>
  11 #include <spl.h>
  12 #include <asm/u-boot.h>
  13 #include <nand.h>
  14 #include <fat.h>
  15 #include <version.h>
  16 #include <i2c.h>
  17 #include <image.h>
  18 #include <malloc.h>
  19 #include <dm/root.h>
  20 #include <linux/compiler.h>
  21
  22 DECLARE_GLOBAL_DATA_PTR;
  23
  24 #ifndef CONFIG_SYS_UBOOT_START
  25 #define CONFIG_SYS_UBOOT_START  CONFIG_SYS_TEXT_BASE
  26 #endif
  27 #ifndef CONFIG_SYS_MONITOR_LEN
  28 /* Unknown U-Boot size, let's assume it will not be more than 200 KB */
  29 #define CONFIG_SYS_MONITOR_LEN  (200 * 1024)
  30 #endif
  31
  32 u32 *boot_params_ptr = NULL;
  33 struct spl_image_info spl_image;
  34
  35 /* Define board data structure */
  36 static bd_t bdata __attribute__ ((section(".data")));
  37
  38 /*
  39  * Default function to determine if u-boot or the OS should
  40  * be started. This implementation always returns 1.
  41  *
  42  * Please implement your own board specific funcion to do this.
  43  *
  44  * RETURN
  45  * 0 to not start u-boot
  46  * positive if u-boot should start
  47  */
  48 #ifdef CONFIG_SPL_OS_BOOT
  49 __weak int spl_start_uboot(void)
  50 {
  51         puts("SPL: Please implement spl_start_uboot() for your board\n");
  52         puts("SPL: Direct Linux boot not active!\n");
  53         return 1;
  54 }
  55 #endif
  56
  57 /*
  58  * Weak default function for board specific cleanup/preparation before
  59  * Linux boot. Some boards/platforms might not need it, so just provide
  60  * an empty stub here.
  61  */
  62 __weak void spl_board_prepare_for_linux(void)
  63 {
  64         /* Nothing to do! */
  65 }
  66
  67 void spl_set_header_raw_uboot(void)
  68 {
  69         spl_image.size = CONFIG_SYS_MONITOR_LEN;
  70         spl_image.entry_point = CONFIG_SYS_UBOOT_START;
  71         spl_image.load_addr = CONFIG_SYS_TEXT_BASE;
  72         spl_image.os = IH_OS_U_BOOT;
  73         spl_image.name = "U-Boot";
  74 }
  75
  76 void spl_parse_image_header(const struct image_header *header)
  77 {
  78         u32 header_size = sizeof(struct image_header);
  79
  80         if (image_get_magic(header) == IH_MAGIC) {
  81                 if (spl_image.flags & SPL_COPY_PAYLOAD_ONLY) {
  82                         /*
  83                          * On some system (e.g. powerpc), the load-address and
  84                          * entry-point is located at address 0. We can't load
  85                          * to 0-0x40. So skip header in this case.
  86                          */
  87                         spl_image.load_addr = image_get_load(header);
  88                         spl_image.entry_point = image_get_ep(header);
  89                         spl_image.size = image_get_data_size(header);
  90                 } else {
  91                         spl_image.entry_point = image_get_load(header);
  92                         /* Load including the header */
  93                         spl_image.load_addr = spl_image.entry_point -
  94                                 header_size;
  95                         spl_image.size = image_get_data_size(header) +
  96                                 header_size;
  97                 }
  98                 spl_image.os = image_get_os(header);
  99                 spl_image.name = image_get_name(header);
 100                 debug("spl: payload image: %.*s load addr: 0x%x size: %d\n",
 101                         (int)sizeof(spl_image.name), spl_image.name,
 102                         spl_image.load_addr, spl_image.size);
 103         } else {
 104 #ifdef CONFIG_SPL_PANIC_ON_RAW_IMAGE
 105                 /*
 106                  * CONFIG_SPL_PANIC_ON_RAW_IMAGE is defined when the
 107                  * code which loads images in SPL cannot guarantee that
 108                  * absolutely all read errors will be reported.
 109                  * An example is the LPC32XX MLC NAND driver, which
 110                  * will consider that a completely unreadable NAND block
 111                  * is bad, and thus should be skipped silently.
 112                  */
 113                 panic("** no mkimage signature but raw image not supported");
 114 #else
 115                 /* Signature not found - assume u-boot.bin */
 116                 debug("mkimage signature not found - ih_magic = %x\n",
 117                         header->ih_magic);
 118                 spl_set_header_raw_uboot();
 119 #endif
 120         }
 121 }
 122
 123 __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 124 {
 125         typedef void __noreturn (*image_entry_noargs_t)(void);
 126
 127         image_entry_noargs_t image_entry =
 128                 (image_entry_noargs_t)(unsigned long)spl_image->entry_point;
 129
 130         debug("image entry point: 0x%X\n", spl_image->entry_point);
 131         image_entry();
 132 }
 133
 134 #ifdef CONFIG_SPL_RAM_DEVICE
 135 static int spl_ram_load_image(void)
 136 {
 137         const struct image_header *header;
 138
 139         /*
 140          * Get the header.  It will point to an address defined by handoff
 141          * which will tell where the image located inside the flash. For
 142          * now, it will temporary fixed to address pointed by U-Boot.
 143          */
 144         header = (struct image_header *)
 145                 (CONFIG_SYS_TEXT_BASE - sizeof(struct image_header));
 146
 147         spl_parse_image_header(header);
 148
 149         return 0;
 150 }
 151 #endif
 152
 153 int spl_init(void)
 154 {
 155         int ret;
 156
 157         debug("spl_init()\n");
 158 #if defined(CONFIG_SYS_MALLOC_F_LEN)
 159         gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN;
 160         gd->malloc_ptr = 0;
 161 #endif
 162         if (CONFIG_IS_ENABLED(OF_CONTROL)) {
 163                 ret = fdtdec_setup();
 164                 if (ret) {
 165                         debug("fdtdec_setup() returned error %d\n", ret);
 166                         return ret;
 167                 }
 168         }
 169         if (IS_ENABLED(CONFIG_SPL_DM)) {
 170                 ret = dm_init_and_scan(true);
 171                 if (ret) {
 172                         debug("dm_init_and_scan() returned error %d\n", ret);
 173                         return ret;
 174                 }
 175         }
 176         gd->flags |= GD_FLG_SPL_INIT;
 177
 178         return 0;
 179 }
 180
 181 #ifndef BOOT_DEVICE_NONE
 182 #define BOOT_DEVICE_NONE 0xdeadbeef
 183 #endif
 184
 185 static u32 spl_boot_list[] = {
 186         BOOT_DEVICE_NONE,
 187         BOOT_DEVICE_NONE,
 188         BOOT_DEVICE_NONE,
 189         BOOT_DEVICE_NONE,
 190         BOOT_DEVICE_NONE,
 191 };
 192
 193 __weak void board_boot_order(u32 *spl_boot_list)
 194 {
 195         spl_boot_list[0] = spl_boot_device();
 196 }
 197
 198 #ifdef CONFIG_SPL_BOARD_LOAD_IMAGE
 199 __weak void spl_board_announce_boot_device(void) { }
 200 #endif
 201
 202 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
 203 struct boot_device_name {
 204         u32 boot_dev;
 205         const char *name;
 206 };
 207
 208 struct boot_device_name boot_name_table[] = {
 209 #ifdef CONFIG_SPL_RAM_DEVICE
 210         { BOOT_DEVICE_RAM, "RAM" },
 211 #endif
 212 #ifdef CONFIG_SPL_MMC_SUPPORT
 213         { BOOT_DEVICE_MMC1, "MMC" },
 214         { BOOT_DEVICE_MMC2, "MMC" },
 215         { BOOT_DEVICE_MMC2_2, "MMC" },
 216 #endif
 217 #ifdef CONFIG_SPL_NAND_SUPPORT
 218         { BOOT_DEVICE_NAND, "NAND" },
 219 #endif
 220 #ifdef CONFIG_SPL_ONENAND_SUPPORT
 221         { BOOT_DEVICE_ONENAND, "OneNAND" },
 222 #endif
 223 #ifdef CONFIG_SPL_NOR_SUPPORT
 224         { BOOT_DEVICE_NOR, "NOR" },
 225 #endif
 226 #ifdef CONFIG_SPL_YMODEM_SUPPORT
 227         { BOOT_DEVICE_UART, "UART" },
 228 #endif
 229 #ifdef CONFIG_SPL_SPI_SUPPORT
 230         { BOOT_DEVICE_SPI, "SPI" },
 231 #endif
 232 #ifdef CONFIG_SPL_ETH_SUPPORT
 233 #ifdef CONFIG_SPL_ETH_DEVICE
 234         { BOOT_DEVICE_CPGMAC, "eth device" },
 235 #else
 236         { BOOT_DEVICE_CPGMAC, "net" },
 237 #endif
 238 #endif
 239 #ifdef CONFIG_SPL_USBETH_SUPPORT
 240         { BOOT_DEVICE_USBETH, "USB eth" },
 241 #endif
 242 #ifdef CONFIG_SPL_USB_SUPPORT
 243         { BOOT_DEVICE_USB, "USB" },
 244 #endif
 245 #ifdef CONFIG_SPL_SATA_SUPPORT
 246         { BOOT_DEVICE_SATA, "SATA" },
 247 #endif
 248         /* Keep this entry last */
 249         { BOOT_DEVICE_NONE, "unknown boot device" },
 250 };
 251
 252 static void announce_boot_device(u32 boot_device)
 253 {
 254         int i;
 255
 256         puts("Trying to boot from ");
 257
 258 #ifdef CONFIG_SPL_BOARD_LOAD_IMAGE
 259         if (boot_device == BOOT_DEVICE_BOARD) {
 260                 spl_board_announce_boot_device();
 261                 puts("\n");
 262                 return;
 263         }
 264 #endif
 265         for (i = 0; i < ARRAY_SIZE(boot_name_table) - 1; i++) {
 266                 if (boot_name_table[i].boot_dev == boot_device)
 267                         break;
 268         }
 269
 270         printf("%s\n", boot_name_table[i].name);
 271 }
 272 #else
 273 static inline void announce_boot_device(u32 boot_device) { }
 274 #endif
 275
 276 static int spl_load_image(u32 boot_device)
 277 {
 278         switch (boot_device) {
 279 #ifdef CONFIG_SPL_RAM_DEVICE
 280         case BOOT_DEVICE_RAM:
 281                 return spl_ram_load_image();
 282 #endif
 283 #ifdef CONFIG_SPL_MMC_SUPPORT
 284         case BOOT_DEVICE_MMC1:
 285         case BOOT_DEVICE_MMC2:
 286         case BOOT_DEVICE_MMC2_2:
 287                 return spl_mmc_load_image(boot_device);
 288 #endif
 289 #ifdef CONFIG_SPL_NAND_SUPPORT
 290         case BOOT_DEVICE_NAND:
 291                 return spl_nand_load_image();
 292 #endif
 293 #ifdef CONFIG_SPL_ONENAND_SUPPORT
 294         case BOOT_DEVICE_ONENAND:
 295                 return spl_onenand_load_image();
 296 #endif
 297 #ifdef CONFIG_SPL_NOR_SUPPORT
 298         case BOOT_DEVICE_NOR:
 299                 return spl_nor_load_image();
 300 #endif
 301 #ifdef CONFIG_SPL_YMODEM_SUPPORT
 302         case BOOT_DEVICE_UART:
 303                 return spl_ymodem_load_image();
 304 #endif
 305 #ifdef CONFIG_SPL_SPI_SUPPORT
 306         case BOOT_DEVICE_SPI:
 307                 return spl_spi_load_image();
 308 #endif
 309 #ifdef CONFIG_SPL_ETH_SUPPORT
 310         case BOOT_DEVICE_CPGMAC:
 311 #ifdef CONFIG_SPL_ETH_DEVICE
 312                 return spl_net_load_image(CONFIG_SPL_ETH_DEVICE);
 313 #else
 314                 return spl_net_load_image(NULL);
 315 #endif
 316 #endif
 317 #ifdef CONFIG_SPL_USBETH_SUPPORT
 318         case BOOT_DEVICE_USBETH:
 319                 return spl_net_load_image("usb_ether");
 320 #endif
 321 #ifdef CONFIG_SPL_USB_SUPPORT
 322         case BOOT_DEVICE_USB:
 323                 return spl_usb_load_image();
 324 #endif
 325 #ifdef CONFIG_SPL_SATA_SUPPORT
 326         case BOOT_DEVICE_SATA:
 327                 return spl_sata_load_image();
 328 #endif
 329 #ifdef CONFIG_SPL_BOARD_LOAD_IMAGE
 330         case BOOT_DEVICE_BOARD:
 331                 return spl_board_load_image();
 332 #endif
 333         default:
 334 #if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 335                 puts("SPL: Unsupported Boot Device!\n");
 336 #endif
 337                 return -ENODEV;
 338         }
 339
 340         return -EINVAL;
 341 }
 342
 343 void board_init_r(gd_t *dummy1, ulong dummy2)
 344 {
 345         int i;
 346
 347         debug(">>spl:board_init_r()\n");
 348
 349 #if defined(CONFIG_SYS_SPL_MALLOC_START)
 350         mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
 351                         CONFIG_SYS_SPL_MALLOC_SIZE);
 352         gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 353 #endif
 354         if (!(gd->flags & GD_FLG_SPL_INIT)) {
 355                 if (spl_init())
 356                         hang();
 357         }
 358 #ifndef CONFIG_PPC
 359         /*
 360          * timer_init() does not exist on PPC systems. The timer is initialized
 361          * and enabled (decrementer) in interrupt_init() here.
 362          */
 363         timer_init();
 364 #endif
 365
 366 #ifdef CONFIG_SPL_BOARD_INIT
 367         spl_board_init();
 368 #endif
 369
 370         board_boot_order(spl_boot_list);
 371         for (i = 0; i < ARRAY_SIZE(spl_boot_list) &&
 372                         spl_boot_list[i] != BOOT_DEVICE_NONE; i++) {
 373                 announce_boot_device(spl_boot_list[i]);
 374                 if (!spl_load_image(spl_boot_list[i]))
 375                         break;
 376         }
 377
 378         if (i == ARRAY_SIZE(spl_boot_list) ||
 379             spl_boot_list[i] == BOOT_DEVICE_NONE) {
 380                 puts("SPL: failed to boot from all boot devices\n");
 381                 hang();
 382         }
 383
 384         switch (spl_image.os) {
 385         case IH_OS_U_BOOT:
 386                 debug("Jumping to U-Boot\n");
 387                 break;
 388 #ifdef CONFIG_SPL_OS_BOOT
 389         case IH_OS_LINUX:
 390                 debug("Jumping to Linux\n");
 391                 spl_board_prepare_for_linux();
 392                 jump_to_image_linux((void *)CONFIG_SYS_SPL_ARGS_ADDR);
 393 #endif
 394         default:
 395                 debug("Unsupported OS image.. Jumping nevertheless..\n");
 396         }
 397 #if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE)
 398         debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
 399               gd->malloc_ptr / 1024);
 400 #endif
 401
 402         debug("loaded - jumping to U-Boot...");
 403         jump_to_image_no_args(&spl_image);
 404 }
 405
 406 /*
 407  * This requires UART clocks to be enabled.  In order for this to work the
 408  * caller must ensure that the gd pointer is valid.
 409  */
 410 void preloader_console_init(void)
 411 {
 412         gd->bd = &bdata;
 413         gd->baudrate = CONFIG_BAUDRATE;
 414
 415         serial_init();          /* serial communications setup */
 416
 417         gd->have_console = 1;
 418
 419         puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \
 420                         U_BOOT_TIME ")\n");
 421 #ifdef CONFIG_SPL_DISPLAY_PRINT
 422         spl_display_print();
 423 #endif
 424 }
 425
 426 /**
 427  * spl_relocate_stack_gd() - Relocate stack ready for board_init_r() execution
 428  *
 429  * Sometimes board_init_f() runs with a stack in SRAM but we want to use SDRAM
 430  * for the main board_init_r() execution. This is typically because we need
 431  * more stack space for things like the MMC sub-system.
 432  *
 433  * This function calculates the stack position, copies the global_data into
 434  * place and returns the new stack position. The caller is responsible for
 435  * setting up the sp register.
 436  *
 437  * @return new stack location, or 0 to use the same stack
 438  */
 439 ulong spl_relocate_stack_gd(void)
 440 {
 441 #ifdef CONFIG_SPL_STACK_R
 442         gd_t *new_gd;
 443         ulong ptr;
 444
 445         /* Get stack position: use 8-byte alignment for ABI compliance */
 446         ptr = CONFIG_SPL_STACK_R_ADDR - sizeof(gd_t);
 447         ptr &= ~7;
 448         new_gd = (gd_t *)ptr;
 449         memcpy(new_gd, (void *)gd, sizeof(gd_t));
 450         gd = new_gd;
 451
 452 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
 453         if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) {
 454                 if (!(gd->flags & GD_FLG_SPL_INIT))
 455                         panic_str("spl_init must be called before heap reloc");
 456
 457                 ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN;
 458                 gd->malloc_base = ptr;
 459                 gd->malloc_limit = CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN;
 460                 gd->malloc_ptr = 0;
 461         }
 462 #endif
 463
 464         return ptr;
 465 #else
 466         return 0;
 467 #endif
 468 }