]> git.sur5r.net Git - u-boot/blob - configs/at91sam9263ek_nandflash_defconfig
armv8: ls1012ardb: Add distro secure boot support
[u-boot] / configs / at91sam9263ek_nandflash_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_AT91=y
3 CONFIG_TARGET_AT91SAM9263EK=y
4 CONFIG_SYS_MALLOC_F_LEN=0x2000
5 CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
6 CONFIG_DEBUG_UART=y
7 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH"
8 CONFIG_BOOTDELAY=3
9 CONFIG_USE_BOOTARGS=y
10 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
11 # CONFIG_CONSOLE_MUX is not set
12 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
13 # CONFIG_DISPLAY_BOARDINFO is not set
14 CONFIG_HUSH_PARSER=y
15 CONFIG_SYS_PROMPT="U-Boot> "
16 # CONFIG_CMD_BDI is not set
17 CONFIG_CMD_BOOTZ=y
18 # CONFIG_CMD_IMI is not set
19 # CONFIG_CMD_LOADS is not set
20 CONFIG_CMD_MMC=y
21 CONFIG_CMD_NAND=y
22 CONFIG_CMD_SF=y
23 CONFIG_CMD_USB=y
24 # CONFIG_CMD_SOURCE is not set
25 # CONFIG_CMD_SETEXPR is not set
26 CONFIG_CMD_DHCP=y
27 CONFIG_CMD_PING=y
28 CONFIG_CMD_FAT=y
29 CONFIG_OF_CONTROL=y
30 CONFIG_ENV_IS_IN_NAND=y
31 CONFIG_DM=y
32 CONFIG_CLK=y
33 CONFIG_CLK_AT91=y
34 CONFIG_DM_GPIO=y
35 CONFIG_AT91_GPIO=y
36 CONFIG_DM_MMC=y
37 CONFIG_GENERIC_ATMEL_MCI=y
38 CONFIG_DM_SPI_FLASH=y
39 CONFIG_SPI_FLASH=y
40 CONFIG_SPI_FLASH_ATMEL=y
41 CONFIG_SPI_FLASH_DATAFLASH=y
42 CONFIG_DM_ETH=y
43 CONFIG_MACB=y
44 CONFIG_PINCTRL=y
45 CONFIG_PINCTRL_AT91=y
46 CONFIG_DM_SERIAL=y
47 CONFIG_DEBUG_UART_ATMEL=y
48 CONFIG_DEBUG_UART_BASE=0xffffee00
49 CONFIG_DEBUG_UART_CLOCK=100000000
50 CONFIG_DEBUG_UART_BOARD_INIT=y
51 CONFIG_DEBUG_UART_ANNOUNCE=y
52 CONFIG_ATMEL_USART=y
53 CONFIG_DM_SPI=y
54 CONFIG_ATMEL_SPI=y
55 CONFIG_TIMER=y
56 CONFIG_ATMEL_PIT_TIMER=y
57 CONFIG_USB=y
58 CONFIG_DM_USB=y
59 CONFIG_USB_STORAGE=y
60 CONFIG_LCD=y