]> git.sur5r.net Git - u-boot/blob - configs/ls1046aqds_lpuart_defconfig
armv8: ls1012ardb: Add distro secure boot support
[u-boot] / configs / ls1046aqds_lpuart_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1046AQDS=y
3 CONFIG_FSL_LS_PPA=y
4 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-lpuart"
5 CONFIG_FIT_VERBOSE=y
6 CONFIG_OF_BOARD_SETUP=y
7 CONFIG_SYS_EXTRA_OPTIONS="LPUART"
8 CONFIG_BOOTDELAY=10
9 CONFIG_USE_BOOTARGS=y
10 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
11 CONFIG_HUSH_PARSER=y
12 CONFIG_CMD_BOOTZ=y
13 CONFIG_CMD_IMLS=y
14 CONFIG_CMD_GREPENV=y
15 CONFIG_CMD_MEMINFO=y
16 CONFIG_CMD_MEMTEST=y
17 CONFIG_CMD_GPT=y
18 CONFIG_CMD_I2C=y
19 CONFIG_CMD_MMC=y
20 CONFIG_CMD_NAND=y
21 CONFIG_CMD_PCI=y
22 CONFIG_CMD_SF=y
23 CONFIG_CMD_USB=y
24 CONFIG_CMD_DHCP=y
25 CONFIG_CMD_MII=y
26 CONFIG_CMD_PING=y
27 CONFIG_CMD_CACHE=y
28 CONFIG_CMD_EXT2=y
29 CONFIG_CMD_FAT=y
30 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
31 CONFIG_OF_CONTROL=y
32 CONFIG_ENV_IS_IN_FLASH=y
33 CONFIG_DM=y
34 CONFIG_FSL_CAAM=y
35 CONFIG_MTD_NOR_FLASH=y
36 CONFIG_SPI_FLASH=y
37 CONFIG_PHYLIB=y
38 CONFIG_NETDEVICES=y
39 CONFIG_E1000=y
40 CONFIG_PCI=y
41 CONFIG_DM_PCI=y
42 CONFIG_DM_PCI_COMPAT=y
43 CONFIG_PCIE_LAYERSCAPE=y
44 CONFIG_DM_SERIAL=y
45 CONFIG_FSL_LPUART=y
46 CONFIG_DM_SPI=y
47 CONFIG_FSL_DSPI=y
48 CONFIG_USB=y
49 CONFIG_DM_USB=y
50 CONFIG_USB_XHCI_HCD=y
51 CONFIG_USB_XHCI_DWC3=y
52 CONFIG_USB_STORAGE=y