]> git.sur5r.net Git - u-boot/blob - configs/ls1046ardb_emmc_defconfig
ARM: rmobile: Enable convenient commands on Porter
[u-boot] / configs / ls1046ardb_emmc_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1046ARDB=y
3 CONFIG_SYS_TEXT_BASE=0x82000000
4 CONFIG_FSL_LS_PPA=y
5 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
6 CONFIG_FIT_VERBOSE=y
7 CONFIG_OF_BOARD_SETUP=y
8 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,EMMC_BOOT"
9 CONFIG_SD_BOOT=y
10 CONFIG_BOOTDELAY=10
11 CONFIG_USE_BOOTARGS=y
12 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
13 CONFIG_SPL=y
14 CONFIG_SPL_BOARD_INIT=y
15 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
16 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
17 CONFIG_HUSH_PARSER=y
18 CONFIG_CMD_GPT=y
19 CONFIG_CMD_I2C=y
20 CONFIG_CMD_MMC=y
21 CONFIG_CMD_NAND=y
22 CONFIG_CMD_PCI=y
23 CONFIG_CMD_SF=y
24 CONFIG_CMD_USB=y
25 CONFIG_CMD_DHCP=y
26 CONFIG_CMD_MII=y
27 CONFIG_CMD_PING=y
28 CONFIG_CMD_CACHE=y
29 CONFIG_CMD_EXT2=y
30 CONFIG_CMD_FAT=y
31 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
32 # CONFIG_SPL_EFI_PARTITION is not set
33 CONFIG_OF_CONTROL=y
34 CONFIG_ENV_IS_IN_MMC=y
35 CONFIG_DM=y
36 CONFIG_FSL_CAAM=y
37 CONFIG_SPI_FLASH=y
38 CONFIG_PHYLIB=y
39 CONFIG_NETDEVICES=y
40 CONFIG_PHY_GIGE=y
41 CONFIG_E1000=y
42 CONFIG_PCI=y
43 CONFIG_DM_PCI=y
44 CONFIG_DM_PCI_COMPAT=y
45 CONFIG_PCIE_LAYERSCAPE=y
46 CONFIG_SYS_NS16550=y
47 CONFIG_DM_SPI=y
48 CONFIG_FSL_QSPI=y
49 CONFIG_USB=y
50 CONFIG_DM_USB=y
51 CONFIG_USB_XHCI_HCD=y
52 CONFIG_USB_XHCI_DWC3=y
53 CONFIG_USB_STORAGE=y