git.sur5r.net Git - u-boot/blob - configs/ls2080aqds_nand_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_TARGET_LS2080AQDS=y
   3 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   4 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   5 CONFIG_SPL_SERIAL_SUPPORT=y
   6 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
   7 CONFIG_SPL_NAND_SUPPORT=y
   8 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
   9 CONFIG_FIT=y
  10 CONFIG_FIT_VERBOSE=y
  11 CONFIG_OF_BOARD_SETUP=y
  12 CONFIG_OF_STDOUT_VIA_ALIAS=y
  13 CONFIG_NAND_BOOT=y
  14 CONFIG_BOOTDELAY=10
  15 CONFIG_USE_BOOTARGS=y
  16 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
  17 # CONFIG_USE_BOOTCOMMAND is not set
  18 CONFIG_SPL=y
  19 CONFIG_SPL_ENV_SUPPORT=y
  20 CONFIG_SPL_I2C_SUPPORT=y
  21 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
  22 CONFIG_CMD_GREPENV=y
  23 CONFIG_CMD_EEPROM=y
  24 CONFIG_CMD_GPT=y
  25 CONFIG_CMD_I2C=y
  26 CONFIG_CMD_MMC=y
  27 CONFIG_CMD_NAND=y
  28 CONFIG_CMD_PCI=y
  29 CONFIG_CMD_SF=y
  30 CONFIG_CMD_USB=y
  31 # CONFIG_CMD_SETEXPR is not set
  32 CONFIG_CMD_CACHE=y
  33 CONFIG_CMD_DATE=y
  34 # CONFIG_ISO_PARTITION is not set
  35 # CONFIG_SPL_EFI_PARTITION is not set
  36 CONFIG_OF_CONTROL=y
  37 CONFIG_OF_EMBED=y
  38 CONFIG_ENV_IS_IN_NAND=y
  39 CONFIG_NET_RANDOM_ETHADDR=y
  40 CONFIG_DM=y
  41 CONFIG_FSL_CAAM=y
  42 CONFIG_NAND=y
  43 CONFIG_DM_SPI_FLASH=y
  44 CONFIG_PHYLIB=y
  45 CONFIG_NETDEVICES=y
  46 CONFIG_PHY_GIGE=y
  47 CONFIG_E1000=y
  48 CONFIG_PCI=y
  49 CONFIG_DM_PCI=y
  50 CONFIG_DM_PCI_COMPAT=y
  51 CONFIG_PCIE_LAYERSCAPE=y
  52 CONFIG_SYS_NS16550=y
  53 CONFIG_DM_SPI=y
  54 CONFIG_FSL_QSPI=y
  55 CONFIG_USB=y
  56 CONFIG_DM_USB=y
  57 CONFIG_USB_XHCI_HCD=y
  58 CONFIG_USB_XHCI_DWC3=y
  59 CONFIG_USB_STORAGE=y
  60 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y