]> git.sur5r.net Git - u-boot/blob - configs/mcx_defconfig
ARM: rmobile: Enable convenient commands on Porter
[u-boot] / configs / mcx_defconfig
1 CONFIG_ARM=y
2 # CONFIG_SYS_THUMB_BUILD is not set
3 CONFIG_ARCH_OMAP2PLUS=y
4 CONFIG_SYS_TEXT_BASE=0x80008000
5 # CONFIG_SPL_GPIO_SUPPORT is not set
6 CONFIG_TARGET_MCX=y
7 CONFIG_EMIF4=y
8 CONFIG_BOOTDELAY=3
9 # CONFIG_CONSOLE_MUX is not set
10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
11 CONFIG_SPL=y
12 # CONFIG_SPL_EXT_SUPPORT is not set
13 CONFIG_HUSH_PARSER=y
14 CONFIG_SYS_PROMPT="mcx # "
15 # CONFIG_CMD_IMI is not set
16 # CONFIG_CMD_FLASH is not set
17 CONFIG_CMD_GPIO=y
18 CONFIG_CMD_I2C=y
19 CONFIG_CMD_MMC=y
20 CONFIG_CMD_NAND=y
21 CONFIG_CMD_USB=y
22 # CONFIG_CMD_SETEXPR is not set
23 CONFIG_CMD_DHCP=y
24 CONFIG_CMD_MII=y
25 CONFIG_CMD_PING=y
26 CONFIG_CMD_BMP=y
27 CONFIG_CMD_CACHE=y
28 CONFIG_CMD_DATE=y
29 CONFIG_CMD_EXT2=y
30 CONFIG_CMD_FAT=y
31 CONFIG_CMD_JFFS2=y
32 CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
33 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),256k(env2),6m(kernel),6m(k_recovery),8m(fs_recovery),-(common_data)"
34 CONFIG_CMD_UBI=y
35 CONFIG_ENV_IS_IN_NAND=y
36 CONFIG_MMC_OMAP_HS=y
37 CONFIG_NAND=y
38 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
39 CONFIG_SPL_NAND_SIMPLE=y
40 CONFIG_SYS_NS16550=y
41 CONFIG_USB=y
42 CONFIG_USB_EHCI_HCD=y
43 CONFIG_USB_ULPI_VIEWPORT_OMAP=y
44 CONFIG_USB_ULPI=y
45 CONFIG_USB_STORAGE=y
46 CONFIG_USB_HOST_ETHER=y
47 CONFIG_USB_ETHER_ASIX=y
48 CONFIG_USB_ETHER_MCS7830=y
49 CONFIG_VIDEO=y
50 # CONFIG_VIDEO_SW_CURSOR is not set
51 CONFIG_OF_LIBFDT=y