]> git.sur5r.net Git - u-boot/blob - configs/pfla02_defconfig
spl: spi: Move CONFIG_SPL_SPI_LOAD to Kconfig
[u-boot] / configs / pfla02_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX6=y
3 CONFIG_SYS_TEXT_BASE=0x17800000
4 CONFIG_SPL_GPIO_SUPPORT=y
5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
7 CONFIG_TARGET_PFLA02=y
8 CONFIG_SPL_MMC_SUPPORT=y
9 CONFIG_SPL_SERIAL_SUPPORT=y
10 CONFIG_SPL_LIBDISK_SUPPORT=y
11 CONFIG_SPL_SPI_FLASH_SUPPORT=y
12 CONFIG_SPL_SPI_SUPPORT=y
13 CONFIG_SPL_WATCHDOG_SUPPORT=y
14 CONFIG_SPL=y
15 CONFIG_CMD_HDMIDETECT=y
16 CONFIG_DISTRO_DEFAULTS=y
17 CONFIG_FIT=y
18 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
19 CONFIG_BOOTDELAY=3
20 # CONFIG_USE_BOOTCOMMAND is not set
21 CONFIG_DISPLAY_BOARDINFO_LATE=y
22 CONFIG_BOARD_EARLY_INIT_F=y
23 CONFIG_SPL_DMA_SUPPORT=y
24 CONFIG_SPL_EXT_SUPPORT=y
25 CONFIG_SPL_I2C_SUPPORT=y
26 CONFIG_SPL_SPI_LOAD=y
27 CONFIG_SPL_YMODEM_SUPPORT=y
28 # CONFIG_CMD_FLASH is not set
29 CONFIG_CMD_GPIO=y
30 CONFIG_CMD_I2C=y
31 CONFIG_CMD_MMC=y
32 # CONFIG_CMD_NAND is not set
33 CONFIG_CMD_SF=y
34 CONFIG_CMD_CACHE=y
35 CONFIG_CMD_EXT4_WRITE=y
36 CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
37 CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:-(nand);spi2.0:1024k(bootloader),64k(env1),64k(env2),-(rescue)"
38 CONFIG_CMD_UBI=y
39 # CONFIG_SPL_PARTITION_UUIDS is not set
40 CONFIG_DM=y
41 CONFIG_FSL_ESDHC=y
42 CONFIG_MTD=y
43 CONFIG_NAND=y
44 CONFIG_NAND_MXS=y
45 CONFIG_SPI_FLASH=y
46 CONFIG_SPI_FLASH_STMICRO=y
47 CONFIG_PHYLIB=y
48 CONFIG_PHY_MICREL=y
49 CONFIG_PHY_MICREL_KSZ90X1=y
50 CONFIG_NETDEVICES=y
51 CONFIG_FEC_MXC=y
52 CONFIG_MXC_SPI=y
53 CONFIG_DM_THERMAL=y
54 CONFIG_OF_LIBFDT=y