]> git.sur5r.net Git - u-boot/blob - configs/platinum_titanium_defconfig
ARM: rmobile: Enable convenient commands on Porter
[u-boot] / configs / platinum_titanium_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX6=y
3 CONFIG_SYS_TEXT_BASE=0x17800000
4 CONFIG_SPL_GPIO_SUPPORT=y
5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
7 CONFIG_TARGET_PLATINUM_TITANIUM=y
8 CONFIG_SPL_MMC_SUPPORT=y
9 CONFIG_SPL_SERIAL_SUPPORT=y
10 CONFIG_SPL_LIBDISK_SUPPORT=y
11 CONFIG_SPL_NAND_SUPPORT=y
12 CONFIG_SPL_WATCHDOG_SUPPORT=y
13 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
14 CONFIG_BOOTDELAY=3
15 CONFIG_BOARD_EARLY_INIT_F=y
16 CONFIG_SPL=y
17 CONFIG_SPL_DMA_SUPPORT=y
18 CONFIG_SPL_EXT_SUPPORT=y
19 CONFIG_SPL_I2C_SUPPORT=y
20 CONFIG_HUSH_PARSER=y
21 CONFIG_SYS_PROMPT="titanium > "
22 CONFIG_CMD_BOOTZ=y
23 # CONFIG_CMD_FLASH is not set
24 CONFIG_CMD_GPIO=y
25 CONFIG_CMD_I2C=y
26 CONFIG_CMD_MMC=y
27 CONFIG_CMD_NAND_TRIMFFS=y
28 CONFIG_CMD_USB=y
29 # CONFIG_CMD_SETEXPR is not set
30 CONFIG_CMD_DHCP=y
31 CONFIG_CMD_MII=y
32 CONFIG_CMD_PING=y
33 CONFIG_CMD_CACHE=y
34 CONFIG_CMD_TIME=y
35 CONFIG_CMD_EXT2=y
36 CONFIG_CMD_EXT4=y
37 CONFIG_CMD_EXT4_WRITE=y
38 CONFIG_CMD_FAT=y
39 CONFIG_CMD_FS_GENERIC=y
40 CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
41 CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:14M(spl),2M(uboot),512k(env1),512k(env2),-(ubi)"
42 CONFIG_CMD_UBI=y
43 CONFIG_ENV_IS_IN_NAND=y
44 CONFIG_NAND=y
45 CONFIG_NAND_MXS=y
46 CONFIG_PHYLIB=y
47 CONFIG_PHY_MICREL=y
48 CONFIG_PHY_MICREL_KSZ90X1=y
49 CONFIG_NETDEVICES=y
50 CONFIG_USB=y
51 CONFIG_USB_STORAGE=y
52 CONFIG_OF_LIBFDT=y