]> git.sur5r.net Git - u-boot/blob - configs/pm9263_defconfig
ARM: rmobile: Enable convenient commands on Porter
[u-boot] / configs / pm9263_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_AT91=y
3 CONFIG_SYS_TEXT_BASE=0
4 CONFIG_TARGET_PM9263=y
5 CONFIG_SYS_MALLOC_F_LEN=0x2000
6 CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
7 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263"
8 CONFIG_BOOTDELAY=3
9 CONFIG_USE_BOOTARGS=y
10 CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 "
11 # CONFIG_CONSOLE_MUX is not set
12 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
13 CONFIG_BOARD_EARLY_INIT_F=y
14 CONFIG_SYS_PROMPT="u-boot-pm9263> "
15 # CONFIG_CMD_BDI is not set
16 # CONFIG_CMD_IMI is not set
17 # CONFIG_CMD_LOADS is not set
18 CONFIG_CMD_NAND=y
19 CONFIG_CMD_SF=y
20 CONFIG_CMD_USB=y
21 # CONFIG_CMD_SETEXPR is not set
22 CONFIG_CMD_DHCP=y
23 CONFIG_CMD_PING=y
24 CONFIG_CMD_CACHE=y
25 CONFIG_CMD_JFFS2=y
26 CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0,nand0=nand"
27 CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand)"
28 CONFIG_OF_CONTROL=y
29 CONFIG_ENV_IS_IN_FLASH=y
30 CONFIG_DM=y
31 CONFIG_CLK=y
32 CONFIG_CLK_AT91=y
33 CONFIG_DM_GPIO=y
34 CONFIG_AT91_GPIO=y
35 # CONFIG_MMC is not set
36 CONFIG_MTD_NOR_FLASH=y
37 CONFIG_DM_SPI_FLASH=y
38 CONFIG_SPI_FLASH=y
39 CONFIG_SPI_FLASH_ATMEL=y
40 CONFIG_SPI_FLASH_DATAFLASH=y
41 CONFIG_DM_SERIAL=y
42 CONFIG_ATMEL_USART=y
43 CONFIG_DM_SPI=y
44 CONFIG_ATMEL_SPI=y
45 CONFIG_USB=y
46 CONFIG_USB_STORAGE=y
47 CONFIG_LCD=y