3 * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 #if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
24 #if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB)
26 #elif defined(CONFIG_S3C2410)
31 #define UART_NR S3C24X0_UART0
33 #elif defined(CONFIG_SERIAL2)
34 # if defined(CONFIG_TRAB)
35 # error "TRAB supports only CONFIG_SERIAL1"
37 #define UART_NR S3C24X0_UART1
39 #elif defined(CONFIG_SERIAL3)
40 # if defined(CONFIG_TRAB)
41 # #error "TRAB supports only CONFIG_SERIAL1"
43 #define UART_NR S3C24X0_UART2
46 #error "Bad: you didn't configure serial ..."
49 void serial_setbrg (void)
51 DECLARE_GLOBAL_DATA_PTR;
52 S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
56 /* value is calculated so : (int)(PCLK/16./baudrate) -1 */
57 reg = get_PCLK() / (16 * gd->baudrate) - 1;
59 /* FIFO enable, Tx/Rx FIFO clear */
62 /* Normal,No parity,1 stop,8 bit */
65 * tx=level,rx=edge,disable timeout int.,enable rx error int.,
66 * normal,interrupt or polling
72 uart->UMCON = 0x1; /* RTS up */
74 for (i = 0; i < 100; i++);
78 * Initialise the serial port with the given baudrate. The settings
79 * are always 8 data bits, no parity, 1 stop bit, no start bits.
82 int serial_init (void)
90 * Read a single byte from the serial port. Returns 1 on success, 0
91 * otherwise. When the function is succesfull, the character read is
92 * written into its argument c.
94 int serial_getc (void)
96 S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
98 /* wait for character to arrive */
99 while (!(uart->UTRSTAT & 0x1));
101 return uart->URXH & 0xff;
105 static int hwflow = 0; /* turned off by default */
106 int hwflow_onoff(int on)
111 break; /* return current */
113 hwflow = 1; /* turn on */
116 hwflow = 0; /* turn off */
123 #ifdef CONFIG_MODEM_SUPPORT
124 static int be_quiet = 0;
125 void disable_putc(void)
130 void enable_putc(void)
138 * Output a single byte to the serial port.
140 void serial_putc (const char c)
142 S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
143 #ifdef CONFIG_MODEM_SUPPORT
148 /* wait for room in the tx FIFO */
149 while (!(uart->UTRSTAT & 0x2));
152 /* Wait for CTS up */
153 while(hwflow && !(uart->UMSTAT & 0x1))
159 /* If \n, also do \r */
165 * Test whether a character is in the RX buffer
167 int serial_tstc (void)
169 S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
171 return uart->UTRSTAT & 0x1;
175 serial_puts (const char *s)
182 #endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */