2 * Copyright (C) 2004 Texas Instruments.
3 * Copyright (C) 2009 David Brownell
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <asm/arch/hardware.h>
28 /* offsets from PLL controller base */
29 #define PLLC_PLLCTL 0x100
30 #define PLLC_PLLM 0x110
31 #define PLLC_PREDIV 0x114
32 #define PLLC_PLLDIV1 0x118
33 #define PLLC_PLLDIV2 0x11c
34 #define PLLC_PLLDIV3 0x120
35 #define PLLC_POSTDIV 0x128
36 #define PLLC_BPDIV 0x12c
37 #define PLLC_PLLDIV4 0x160
38 #define PLLC_PLLDIV5 0x164
39 #define PLLC_PLLDIV6 0x168
40 #define PLLC_PLLDIV8 0x170
41 #define PLLC_PLLDIV9 0x174
43 #define BIT(x) (1 << (x))
45 /* SOC-specific pll info */
46 #ifdef CONFIG_SOC_DM355
47 #define ARM_PLLDIV PLLC_PLLDIV1
48 #define DDR_PLLDIV PLLC_PLLDIV1
51 #ifdef CONFIG_SOC_DM644X
52 #define ARM_PLLDIV PLLC_PLLDIV2
53 #define DSP_PLLDIV PLLC_PLLDIV1
54 #define DDR_PLLDIV PLLC_PLLDIV2
57 #ifdef CONFIG_SOC_DM6447
58 #define ARM_PLLDIV PLLC_PLLDIV2
59 #define DSP_PLLDIV PLLC_PLLDIV1
60 #define DDR_PLLDIV PLLC_PLLDIV1
64 #ifdef CONFIG_DISPLAY_CPUINFO
66 static unsigned pll_div(volatile void *pllbase, unsigned offset)
70 div = REG(pllbase + offset);
71 return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
74 static inline unsigned pll_prediv(volatile void *pllbase)
76 #ifdef CONFIG_SOC_DM355
77 /* this register read seems to fail on pll0 */
78 if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
81 return pll_div(pllbase, PLLC_PREDIV);
86 static inline unsigned pll_postdiv(volatile void *pllbase)
88 #ifdef CONFIG_SOC_DM355
89 return pll_div(pllbase, PLLC_POSTDIV);
90 #elif defined(CONFIG_SOC_DM6446)
91 if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
92 return pll_div(pllbase, PLLC_POSTDIV);
97 static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
99 volatile void *pllbase = (volatile void *) pll_addr;
100 unsigned base = CONFIG_SYS_HZ_CLOCK / 1000;
102 /* the PLL might be bypassed */
103 if (REG(pllbase + PLLC_PLLCTL) & BIT(0)) {
104 base /= pll_prediv(pllbase);
105 base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff);
106 base /= pll_postdiv(pllbase);
108 return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div));
111 int print_cpuinfo(void)
113 /* REVISIT fetch and display CPU ID and revision information
114 * too ... that will matter as more revisions appear.
116 printf("Cores: ARM %d MHz",
117 pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV));
120 printf(", DSP %d MHz",
121 pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV));
124 printf("\nDDR: %d MHz\n",
125 /* DDR PHY uses an x2 input clock */
126 pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, DDR_PLLDIV)
134 * Initializes on-chip ethernet controllers.
135 * to override, implement board_eth_init()
137 int cpu_eth_init(bd_t *bis)
139 #if defined(CONFIG_DRIVER_TI_EMAC)
140 davinci_emac_initialize();