2 * U-boot - cpu.c CPU specific functions
4 * Copyright (c) 2005-2008 Analog Devices Inc.
6 * (C) Copyright 2000-2004
7 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
9 * Licensed under the GPL-2 or later.
14 #include <asm/blackfin.h>
16 #include <asm/mach-common/bits/core.h>
17 #include <asm/mach-common/bits/ebiu.h>
18 #include <asm/mach-common/bits/trace.h>
23 ulong bfin_poweron_retx;
25 __attribute__ ((__noreturn__))
26 void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
28 extern char _stext_l1;
29 #ifndef CONFIG_BFIN_BOOTROM_USES_EVT1
30 /* Build a NOP slide over the LDR jump block. Whee! */
32 serial_early_puts("NOP Slide\n");
33 memset(nops, 0x00, sizeof(nops));
34 memcpy(&_stext_l1 - sizeof(nops), nops, sizeof(nops));
37 if (!loaded_from_ldr) {
38 /* Relocate sections into L1 if the LDR didn't do it -- don't
39 * check length because the linker script does the size
40 * checking at build time.
42 serial_early_puts("L1 Relocate\n");
43 extern char _stext_l1, _etext_l1, _stext_l1_lma;
44 memcpy(&_stext_l1, &_stext_l1_lma, (&_etext_l1 - &_stext_l1));
45 extern char _sdata_l1, _edata_l1, _sdata_l1_lma;
46 memcpy(&_sdata_l1, &_sdata_l1_lma, (&_edata_l1 - &_sdata_l1));
48 #if defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
49 /* The BF537 bootrom will reset the EBIU_AMGCTL register on us
50 * after it has finished loading the LDR. So configure it again.
53 bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL);
56 /* Save RETX so we can pass it while booting Linux */
57 bfin_poweron_retx = bootflag;
59 #ifdef CONFIG_DEBUG_DUMP
60 /* Turn on hardware trace buffer */
61 bfin_write_TBUFCTL(TBUFPWR | TBUFEN);
64 #ifndef CONFIG_PANIC_HANG
65 /* Reset upon a double exception rather than just hanging.
66 * Do not do bfin_read on SWRST as that will reset status bits.
68 bfin_write_SWRST(DOUBLE_FAULT);
71 serial_early_puts("Board init flash\n");
72 board_init_f(bootflag);
75 int exception_init(void)
77 bfin_write_EVT3(trap);
84 bfin_write_SIC_IMASK0(0);
85 bfin_write_SIC_IMASK1(0);
87 bfin_write_SIC_IMASK2(0);
89 #elif defined(SICA_IMASK0)
90 bfin_write_SICA_IMASK0(0);
91 bfin_write_SICA_IMASK1(0);
93 bfin_write_SIC_IMASK(0);
95 bfin_write_EVT2(evt_default); /* NMI */
96 bfin_write_EVT5(evt_default); /* hardware error */
97 bfin_write_EVT6(evt_default); /* core timer */
98 bfin_write_EVT7(evt_default);
99 bfin_write_EVT8(evt_default);
100 bfin_write_EVT9(evt_default);
101 bfin_write_EVT10(evt_default);
102 bfin_write_EVT11(evt_default);
103 bfin_write_EVT12(evt_default);
104 bfin_write_EVT13(evt_default);
105 bfin_write_EVT14(evt_default);
106 bfin_write_EVT15(evt_default);
109 /* enable hardware error irq */