1 Intel Bay Trail FSP UPD Binding
2 ===============================
4 The device tree node which describes the overriding of the Intel Bay Trail FSP
5 UPD data for configuring the SoC.
7 All properties can be found within the `upd-region` struct in
8 arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h, under the same names, and in
9 Intel's FSP Binary Configuration Tool for Bay Trail. This list of properties is
10 matched up to Intel's E3800 FSPv4 release.
23 - fsp,lpss-sio-enable-pci-mode
38 - fsp,scc-enable-pci-mode
39 - fsp,igd-render-standby
41 - fsp,emmc45-ddr50-enabled
42 - fsp,emmc45-hs200-enabled
44 - fsp,enable-memory-down
46 If you set "fsp,enable-memory-down" you are strongly encouraged to provide an
47 "fsp,memory-down-params{};" to specify how your memory is configured. If you do
48 not set "fsp,enable-memory-down", then the DIMM SPD information will be
49 discovered by the FSP and used to setup main memory.
54 - fsp,mrc-init-tseg-size
55 - fsp,mrc-init-mmio-size
56 - fsp,mrc-init-spd-addr1
57 - fsp,mrc-init-spd-addr2
60 - fsp,igd-dvmt50-pre-alloc
63 - fsp,serial-debug-port-address
64 - fsp,serial-debug-port-type
66 - fsp,emmc45-retune-timer-value
68 - fsp,memory-down-params {
93 Example (from MinnowMax Dual Core):
94 -----------------------------------
100 compatible = "intel,baytrail-fsp";
101 fsp,mrc-init-tseg-size = <0>;
102 fsp,mrc-init-mmio-size = <0x800>;
103 fsp,mrc-init-spd-addr1 = <0xa0>;
104 fsp,mrc-init-spd-addr2 = <0xa2>;
105 fsp,emmc-boot-mode = <2>;
114 fsp,lpss-sio-enable-pci-mode;
126 fsp,igd-dvmt50-pre-alloc = <2>;
127 fsp,aperture-size = <2>;
129 fsp,serial-debug-port-address = <0x3f8>;
130 fsp,serial-debug-port-type = <1>;
132 fsp,scc-enable-pci-mode;
133 fsp,os-selection = <4>;
134 fsp,emmc45-ddr50-enabled;
135 fsp,emmc45-retune-timer-value = <8>;
137 fsp,enable-memory-down;
138 fsp,memory-down-params {
139 compatible = "intel,baytrail-fsp-mdp";
140 fsp,dram-speed = <1>;
143 fsp,dimm-width = <1>;
144 fsp,dimm-density = <2>;
145 fsp,dimm-bus-width = <3>;
146 fsp,dimm-sides = <0>;
147 fsp,dimm-tcl = <0xb>;
148 fsp,dimm-trpt-rcd = <0xb>;
149 fsp,dimm-twr = <0xc>;
153 fsp,dimm-tfaw = <0x14>;