2 bool "AT91 clock drivers"
6 This option is used to enable the AT91 clock driver.
7 The driver supports the AT91 clock generator, including
8 the oscillators and PLLs, such as main clock, slow clock,
9 PLLA, UTMI PLL. Clocks can also be a source clock of other
10 clocks a tree structure, such as master clock, usb device
11 clock, matrix clock and generic clock.
12 Devices can use a common clock API to request a particular
13 clock, enable it and get its rate.
16 bool "Support UTMI PLL Clock"
17 depends on CLK_AT91 && SPL_DM
23 This option is used to enable the AT91 UTMI PLL clock
24 driver. It is the clock provider of USB, and UPLLCK is the
25 output of 480 MHz UTMI PLL, The souce clock of the UTMI
26 PLL is the main clock, so the main clock must select the
27 fast crystal oscillator to meet the frequency accuracy
31 bool "Support H32MX 32-bit Matrix Clock"
34 This option is used to enable the AT91 H32MX matrixes
35 clock driver. There are H64MX and H32MX matrixes clocks,
36 H64MX 64-bit matrix clocks are MCK. The H32MX 32-bit
37 matrix clock is to be configured as MCK if MCK does not
38 exceed 83 MHz, else it is to be configured as MCK/2.
40 config AT91_GENERIC_CLK
41 bool "Support Generic Clock"
44 This option is used to enable the AT91 generic clock
45 driver. Some peripherals may need a second clock source
46 that may be different from the system clock. This second
47 clock is the generic clock (GCLK) and is managed by
48 the PMC via PMC_PCR register.