git.sur5r.net Git - u-boot/blob - drivers/inca-ip_sw.c

   1 /*
   2  * INCA-IP internal switch ethernet driver.
   3  *
   4  * (C) Copyright 2003-2004
   5  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26
  27 #include <common.h>
  28
  29 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
  30         && defined(CONFIG_INCA_IP_SWITCH)
  31
  32 #include <malloc.h>
  33 #include <net.h>
  34 #include <asm/inca-ip.h>
  35 #include <asm/addrspace.h>
  36
  37
  38 #define NUM_RX_DESC     PKTBUFSRX
  39 #define NUM_TX_DESC     3
  40 #define TOUT_LOOP       1000000
  41
  42
  43 #define DELAY   udelay(10000)
  44   /* Sometimes the store word instruction hangs while writing to one
  45    * of the Switch registers. Moving the instruction into a separate
  46    * function somehow makes the problem go away.
  47    */
  48 static void SWORD(volatile u32 * reg, u32 value)
  49 {
  50         *reg = value;
  51 }
  52
  53 #define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value;
  54 #define DMA_READ_REG(reg, value)    value = (u32)*((volatile u32*)reg)
  55 #define SW_WRITE_REG(reg, value)   \
  56         SWORD(reg, value);\
  57         DELAY;\
  58         SWORD(reg, value);
  59
  60 #define SW_READ_REG(reg, value)    \
  61         value = (u32)*((volatile u32*)reg);\
  62         DELAY;\
  63         value = (u32)*((volatile u32*)reg);
  64
  65 #define INCA_DMA_TX_POLLING_TIME        0x07
  66 #define INCA_DMA_RX_POLLING_TIME        0x07
  67
  68 #define INCA_DMA_TX_HOLD                0x80000000
  69 #define INCA_DMA_TX_EOP                 0x40000000
  70 #define INCA_DMA_TX_SOP                 0x20000000
  71 #define INCA_DMA_TX_ICPT                0x10000000
  72 #define INCA_DMA_TX_IEOP                0x08000000
  73
  74 #define INCA_DMA_RX_C                   0x80000000
  75 #define INCA_DMA_RX_SOP                 0x40000000
  76 #define INCA_DMA_RX_EOP                 0x20000000
  77
  78 #define INCA_SWITCH_PHY_SPEED_10H       0x1
  79 #define INCA_SWITCH_PHY_SPEED_10F       0x5
  80 #define INCA_SWITCH_PHY_SPEED_100H      0x2
  81 #define INCA_SWITCH_PHY_SPEED_100F      0x6
  82
  83 /************************ Auto MDIX settings ************************/
  84 #define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR         INCA_IP_Ports_P1_DIR
  85 #define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL      INCA_IP_Ports_P1_ALTSEL
  86 #define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT         INCA_IP_Ports_P1_OUT
  87 #define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX     16
  88
  89 #define WAIT_SIGNAL_RETRIES                     100
  90 #define WAIT_LINK_RETRIES                       100
  91 #define LINK_RETRY_DELAY                        2000  /* ms */
  92 /********************************************************************/
  93
  94 typedef struct
  95 {
  96         union {
  97                 struct {
  98                         volatile u32 HOLD               :1;
  99                         volatile u32 ICpt               :1;
 100                         volatile u32 IEop               :1;
 101                         volatile u32 offset             :3;
 102                         volatile u32 reserved0          :4;
 103                         volatile u32 NFB                :22;
 104                 }field;
 105
 106                 volatile u32 word;
 107         }params;
 108
 109         volatile u32 nextRxDescPtr;
 110
 111         volatile u32 RxDataPtr;
 112
 113         union {
 114                 struct {
 115                         volatile u32 C                  :1;
 116                         volatile u32 Sop                :1;
 117                         volatile u32 Eop                :1;
 118                         volatile u32 reserved3          :12;
 119                         volatile u32 NBT                :17;
 120                 }field;
 121
 122                 volatile u32 word;
 123         }status;
 124
 125 } inca_rx_descriptor_t;
 126
 127
 128 typedef struct
 129 {
 130         union {
 131                 struct {
 132                         volatile u32 HOLD               :1;
 133                         volatile u32 Eop                :1;
 134                         volatile u32 Sop                :1;
 135                         volatile u32 ICpt               :1;
 136                         volatile u32 IEop               :1;
 137                         volatile u32 reserved0          :5;
 138                         volatile u32 NBA                :22;
 139                 }field;
 140
 141                 volatile u32 word;
 142         }params;
 143
 144         volatile u32 nextTxDescPtr;
 145
 146         volatile u32 TxDataPtr;
 147
 148         volatile u32 C                  :1;
 149         volatile u32 reserved3          :31;
 150
 151 } inca_tx_descriptor_t;
 152
 153
 154 static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16)));
 155 static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16)));
 156
 157 static int tx_new, rx_new, tx_hold, rx_hold;
 158 static int tx_old_hold = -1;
 159 static int initialized  = 0;
 160
 161
 162 static int inca_switch_init(struct eth_device *dev, bd_t * bis);
 163 static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length);
 164 static int inca_switch_recv(struct eth_device *dev);
 165 static void inca_switch_halt(struct eth_device *dev);
 166 static void inca_init_switch_chip(void);
 167 static void inca_dma_init(void);
 168 static int inca_amdix(void);
 169
 170
 171 int inca_switch_initialize(bd_t * bis)
 172 {
 173         struct eth_device *dev;
 174
 175 #if 0
 176         printf("Entered inca_switch_initialize()\n");
 177 #endif
 178
 179         if (!(dev = (struct eth_device *) malloc (sizeof *dev))) {
 180                 printf("Failed to allocate memory\n");
 181                 return 0;
 182         }
 183         memset(dev, 0, sizeof(*dev));
 184
 185         inca_dma_init();
 186
 187         inca_init_switch_chip();
 188
 189 #if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
 190         inca_amdix();
 191 #endif
 192
 193         sprintf(dev->name, "INCA-IP Switch");
 194         dev->init = inca_switch_init;
 195         dev->halt = inca_switch_halt;
 196         dev->send = inca_switch_send;
 197         dev->recv = inca_switch_recv;
 198
 199         eth_register(dev);
 200
 201 #if 0
 202         printf("Leaving inca_switch_initialize()\n");
 203 #endif
 204
 205         return 1;
 206 }
 207
 208
 209 static int inca_switch_init(struct eth_device *dev, bd_t * bis)
 210 {
 211         int i;
 212         u32 v, regValue;
 213         u16 wTmp;
 214
 215 #if 0
 216         printf("Entering inca_switch_init()\n");
 217 #endif
 218
 219         /* Set MAC address.
 220          */
 221         wTmp = (u16)dev->enetaddr[0];
 222         regValue = (wTmp << 8) | dev->enetaddr[1];
 223
 224         SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue);
 225
 226         wTmp = (u16)dev->enetaddr[2];
 227         regValue = (wTmp << 8) | dev->enetaddr[3];
 228         regValue = regValue << 16;
 229         wTmp = (u16)dev->enetaddr[4];
 230         regValue |= (wTmp<<8) | dev->enetaddr[5];
 231
 232         SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue);
 233
 234         /* Initialize the descriptor rings.
 235          */
 236         for (i = 0; i < NUM_RX_DESC; i++) {
 237                 inca_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_ring[i]);
 238                 memset(rx_desc, 0, sizeof(rx_ring[i]));
 239
 240                 /* Set maximum size of receive buffer.
 241                  */
 242                 rx_desc->params.field.NFB = PKTSIZE_ALIGN;
 243
 244                 /* Set the offset of the receive buffer. Zero means
 245                  * that the offset mechanism is not used.
 246                  */
 247                 rx_desc->params.field.offset = 0;
 248
 249                 /* Check if it is the last descriptor.
 250                  */
 251                 if (i == (NUM_RX_DESC - 1)) {
 252                         /* Let the last descriptor point to the first
 253                          * one.
 254                          */
 255                         rx_desc->nextRxDescPtr = KSEG1ADDR((u32)rx_ring);
 256                 } else {
 257                         /* Set the address of the next descriptor.
 258                          */
 259                         rx_desc->nextRxDescPtr = (u32)KSEG1ADDR(&rx_ring[i+1]);
 260                 }
 261
 262                 rx_desc->RxDataPtr = (u32)KSEG1ADDR(NetRxPackets[i]);
 263         }
 264
 265 #if 0
 266         printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]);
 267         printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]);
 268 #endif
 269
 270         for (i = 0; i < NUM_TX_DESC; i++) {
 271                 inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[i]);
 272
 273                 memset(tx_desc, 0, sizeof(tx_ring[i]));
 274
 275                 tx_desc->params.word       = 0;
 276                 tx_desc->params.field.HOLD = 1;
 277                 tx_desc->C                 = 1;
 278
 279                         /* Check if it is the last descriptor.
 280                          */
 281                 if (i == (NUM_TX_DESC - 1)) {
 282                                 /* Let the last descriptor point to the
 283                                  * first one.
 284                                  */
 285                         tx_desc->nextTxDescPtr = KSEG1ADDR((u32)tx_ring);
 286                 } else {
 287                                 /* Set the address of the next descriptor.
 288                                  */
 289                         tx_desc->nextTxDescPtr = (u32)KSEG1ADDR(&tx_ring[i+1]);
 290                 }
 291         }
 292
 293         /* Initialize RxDMA.
 294          */
 295         DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v);
 296 #if 0
 297         printf("RX status = 0x%08X\n", v);
 298 #endif
 299
 300         /* Writing to the FRDA of CHANNEL.
 301          */
 302         DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring);
 303
 304         /* Writing to the COMMAND REG.
 305          */
 306         DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT);
 307
 308         /* Initialize TxDMA.
 309          */
 310         DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v);
 311 #if 0
 312         printf("TX status = 0x%08X\n", v);
 313 #endif
 314
 315         /* Writing to the FRDA of CHANNEL.
 316          */
 317         DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring);
 318
 319         tx_new = rx_new = 0;
 320
 321         tx_hold = NUM_TX_DESC - 1;
 322         rx_hold = NUM_RX_DESC - 1;
 323
 324 #if 0
 325         rx_ring[rx_hold].params.field.HOLD = 1;
 326 #endif
 327         /* enable spanning tree forwarding, enable the CPU port */
 328         /* ST_PT:
 329          *      CPS (CPU port status)   0x3 (forwarding)
 330          *      LPS (LAN port status)   0x3 (forwarding)
 331          *      PPS (PC port status)    0x3 (forwarding)
 332          */
 333         SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);
 334
 335 #if 0
 336         printf("Leaving inca_switch_init()\n");
 337 #endif
 338
 339         return 0;
 340 }
 341
 342
 343 static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length)
 344 {
 345         int                    i;
 346         int                    res      = -1;
 347         u32                    command;
 348         u32                    regValue;
 349         inca_tx_descriptor_t * tx_desc  = KSEG1ADDR(&tx_ring[tx_new]);
 350
 351 #if 0
 352         printf("Entered inca_switch_send()\n");
 353 #endif
 354
 355         if (length <= 0) {
 356                 printf ("%s: bad packet size: %d\n", dev->name, length);
 357                 goto Done;
 358         }
 359
 360         for(i = 0; tx_desc->C == 0; i++) {
 361                 if (i >= TOUT_LOOP) {
 362                         printf("%s: tx error buffer not ready\n", dev->name);
 363                         goto Done;
 364                 }
 365         }
 366
 367         if (tx_old_hold >= 0) {
 368                 KSEG1ADDR(&tx_ring[tx_old_hold])->params.field.HOLD = 1;
 369         }
 370         tx_old_hold = tx_hold;
 371
 372         tx_desc->params.word =
 373                         (INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD);
 374
 375         tx_desc->C = 0;
 376         tx_desc->TxDataPtr = (u32)packet;
 377         tx_desc->params.field.NBA = length;
 378
 379         KSEG1ADDR(&tx_ring[tx_hold])->params.field.HOLD = 0;
 380
 381         tx_hold = tx_new;
 382         tx_new  = (tx_new + 1) % NUM_TX_DESC;
 383
 384
 385         if (! initialized) {
 386                 command = INCA_IP_DMA_DMA_TXCCR0_INIT;
 387                 initialized = 1;
 388         } else {
 389                 command = INCA_IP_DMA_DMA_TXCCR0_HR;
 390         }
 391
 392         DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
 393         regValue |= command;
 394 #if 0
 395         printf("regValue = 0x%x\n", regValue);
 396 #endif
 397         DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
 398
 399 #if 1
 400         for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++) {
 401                 if (i >= TOUT_LOOP) {
 402                         printf("%s: tx buffer not ready\n", dev->name);
 403                         goto Done;
 404                 }
 405         }
 406 #endif
 407         res = length;
 408 Done:
 409 #if 0
 410         printf("Leaving inca_switch_send()\n");
 411 #endif
 412         return res;
 413 }
 414
 415
 416 static int inca_switch_recv(struct eth_device *dev)
 417 {
 418         int                    length  = 0;
 419         inca_rx_descriptor_t * rx_desc;
 420
 421 #if 0
 422         printf("Entered inca_switch_recv()\n");
 423 #endif
 424
 425         for (;;) {
 426                 rx_desc = KSEG1ADDR(&rx_ring[rx_new]);
 427
 428                 if (rx_desc->status.field.C == 0) {
 429                         break;
 430                 }
 431
 432 #if 0
 433                 rx_ring[rx_new].params.field.HOLD = 1;
 434 #endif
 435
 436                 if (! rx_desc->status.field.Eop) {
 437                         printf("Partly received packet!!!\n");
 438                         break;
 439                 }
 440
 441                 length = rx_desc->status.field.NBT;
 442                 rx_desc->status.word &=
 443                          ~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C);
 444 #if 0
 445 {
 446   int i;
 447   for (i=0;i<length - 4;i++) {
 448     if (i % 16 == 0) printf("\n%04x: ", i);
 449     printf("%02X ", NetRxPackets[rx_new][i]);
 450   }
 451   printf("\n");
 452 }
 453 #endif
 454
 455                 if (length) {
 456 #if 0
 457                         printf("Received %d bytes\n", length);
 458 #endif
 459                         NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]), length - 4);
 460                 } else {
 461 #if 1
 462                         printf("Zero length!!!\n");
 463 #endif
 464                 }
 465
 466
 467                 KSEG1ADDR(&rx_ring[rx_hold])->params.field.HOLD = 0;
 468
 469                 rx_hold = rx_new;
 470
 471                 rx_new = (rx_new + 1) % NUM_RX_DESC;
 472         }
 473
 474 #if 0
 475         printf("Leaving inca_switch_recv()\n");
 476 #endif
 477
 478         return length;
 479 }
 480
 481
 482 static void inca_switch_halt(struct eth_device *dev)
 483 {
 484 #if 0
 485         printf("Entered inca_switch_halt()\n");
 486 #endif
 487
 488 #if 1
 489         initialized = 0;
 490 #endif
 491 #if 1
 492         /* Disable forwarding to the CPU port.
 493          */
 494         SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
 495
 496         /* Close RxDMA channel.
 497          */
 498         DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
 499
 500         /* Close TxDMA channel.
 501          */
 502         DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF);
 503
 504
 505 #endif
 506 #if 0
 507         printf("Leaving inca_switch_halt()\n");
 508 #endif
 509 }
 510
 511
 512 static void inca_init_switch_chip(void)
 513 {
 514         u32 regValue;
 515
 516         /* To workaround a problem with collision counter
 517          * (see Errata sheet).
 518          */
 519         SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001);
 520         SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001);
 521
 522 #if 1
 523         /* init MDIO configuration:
 524          *      MDS (Poll speed):       0x01 (4ms)
 525          *      PHY_LAN_ADDR:           0x06
 526          *      PHY_PC_ADDR:            0x05
 527          *      UEP (Use External PHY): 0x00 (Internal PHY is used)
 528          *      PS (Port Select):       0x00 (PT/UMM for LAN)
 529          *      PT (PHY Test):          0x00 (no test mode)
 530          *      UMM (Use MDIO Mode):    0x00 (state machine is disabled)
 531          */
 532         SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);
 533
 534         /* init PHY:
 535          *      SL (Auto Neg. Speed for LAN)
 536          *      SP (Auto Neg. Speed for PC)
 537          *      LL (Link Status for LAN)
 538          *      LP (Link Status for PC)
 539          *      DL (Duplex Status for LAN)
 540          *      DP (Duplex Status for PC)
 541          *      PL (Auto Neg. Pause Status for LAN)
 542          *      PP (Auto Neg. Pause Status for PC)
 543          */
 544         SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff);
 545
 546         /* MDIO_ACC:
 547          *      RA (Request/Ack)  0x01 (Request)
 548          *      RW (Read/Write)   0x01 (Write)
 549          *      PHY_ADDR          0x05 (PC)
 550          *      REG_ADDR          0x00 (PHY_BCR: basic control register)
 551          *      PHY_DATA          0x8000
 552          *                    Reset                   - software reset
 553          *                    LB (loop back)          - normal
 554          *                    SS (speed select)       - 10 Mbit/s
 555          *                    ANE (auto neg. enable)  - enable
 556          *                    PD (power down)         - normal
 557          *                    ISO (isolate)           - normal
 558          *                    RAN (restart auto neg.) - normal
 559          *                    DM (duplex mode)        - half duplex
 560          *                    CT (collision test)     - enable
 561          */
 562         SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000);
 563
 564         /* MDIO_ACC:
 565          *      RA (Request/Ack)  0x01 (Request)
 566          *      RW (Read/Write)   0x01 (Write)
 567          *      PHY_ADDR          0x06 (LAN)
 568          *      REG_ADDR          0x00 (PHY_BCR: basic control register)
 569          *      PHY_DATA          0x8000
 570          *                    Reset                   - software reset
 571          *                    LB (loop back)          - normal
 572          *                    SS (speed select)       - 10 Mbit/s
 573          *                    ANE (auto neg. enable)  - enable
 574          *                    PD (power down)         - normal
 575          *                    ISO (isolate)           - normal
 576          *                    RAN (restart auto neg.) - normal
 577          *                    DM (duplex mode)        - half duplex
 578          *                    CT (collision test)     - enable
 579          */
 580         SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000);
 581
 582 #endif
 583
 584         /* Make sure the CPU port is disabled for now. We
 585          * don't want packets to get stacked for us until
 586          * we enable DMA and are prepared to receive them.
 587          */
 588         SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
 589
 590         SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue);
 591
 592         /* CRC GEN is enabled.
 593          */
 594         regValue |= 0x00000200;
 595         SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue);
 596
 597         /* ADD TAG is disabled.
 598          */
 599         SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
 600         regValue &= ~0x00000002;
 601         SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
 602 }
 603
 604
 605 static void inca_dma_init(void)
 606 {
 607         /* Switch off all DMA channels.
 608          */
 609         DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
 610         DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF);
 611
 612         DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
 613         DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF);
 614         DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF);
 615
 616         /* Setup TX channel polling time.
 617          */
 618         DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME);
 619
 620         /* Setup RX channel polling time.
 621          */
 622         DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME);
 623
 624         /* ERRATA: write reset value into the DMA RX IMR register.
 625          */
 626         DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF);
 627
 628         /* Just in case: disable all transmit interrupts also.
 629          */
 630         DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF);
 631
 632         DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF);
 633         DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
 634 }
 635
 636 #if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
 637 static int inca_amdix(void)
 638 {
 639         u32 phyReg1 = 0;
 640         u32 phyReg4 = 0;
 641         u32 phyReg5 = 0;
 642         u32 phyReg6 = 0;
 643         u32 phyReg31 = 0;
 644         u32 regEphy = 0;
 645         int mdi_flag;
 646         int retries;
 647
 648         /* Setup GPIO pins.
 649          */
 650         *INCA_IP_AUTO_MDIX_LAN_PORTS_DIR    |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
 651         *INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
 652
 653 #if 0
 654         /* Wait for signal.
 655          */
 656         retries = WAIT_SIGNAL_RETRIES;
 657         while (--retries) {
 658                 SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 659                                 (0x1 << 31) |   /* RA           */
 660                                 (0x0 << 30) |   /* Read         */
 661                                 (0x6 << 21) |   /* LAN          */
 662                                 (17  << 16));   /* PHY_MCSR     */
 663                 do {
 664                         SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
 665                 } while (phyReg1 & (1 << 31));
 666
 667                 if (phyReg1 & (1 << 1)) {
 668                         /* Signal detected */
 669                         break;
 670                 }
 671         }
 672
 673         if (!retries)
 674                 goto Fail;
 675 #endif
 676
 677         /* Set MDI mode.
 678          */
 679         *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
 680         mdi_flag = 1;
 681
 682         /* Wait for link.
 683          */
 684         retries = WAIT_LINK_RETRIES;
 685         while (--retries) {
 686                 udelay(LINK_RETRY_DELAY * 1000);
 687                 SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 688                                 (0x1 << 31) |   /* RA           */
 689                                 (0x0 << 30) |   /* Read         */
 690                                 (0x6 << 21) |   /* LAN          */
 691                                 (1   << 16));   /* PHY_BSR      */
 692                 do {
 693                         SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
 694                 } while (phyReg1 & (1 << 31));
 695
 696                 if (phyReg1 & (1 << 2)) {
 697                         /* Link is up */
 698                         break;
 699                 } else if (mdi_flag) {
 700                         /* Set MDIX mode */
 701                         *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
 702                         mdi_flag = 0;
 703                 } else {
 704                         /* Set MDI mode */
 705                         *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
 706                         mdi_flag = 1;
 707                 }
 708         }
 709
 710         if (!retries) {
 711                 goto Fail;
 712         } else {
 713                 SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 714                                 (0x1 << 31) |   /* RA           */
 715                                 (0x0 << 30) |   /* Read         */
 716                                 (0x6 << 21) |   /* LAN          */
 717                                 (1   << 16));   /* PHY_BSR      */
 718                 do {
 719                         SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
 720                 } while (phyReg1 & (1 << 31));
 721
 722                 /* Auto-negotiation / Parallel detection complete
 723                  */
 724                 if (phyReg1 & (1 << 5)) {
 725                         SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 726                                 (0x1 << 31) |   /* RA           */
 727                                 (0x0 << 30) |   /* Read         */
 728                                 (0x6 << 21) |   /* LAN          */
 729                                 (31  << 16));   /* PHY_SCSR     */
 730                         do {
 731                                 SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31);
 732                         } while (phyReg31 & (1 << 31));
 733
 734                         switch ((phyReg31 >> 2) & 0x7) {
 735                         case INCA_SWITCH_PHY_SPEED_10H:
 736                                 /* 10Base-T Half-duplex */
 737                                 regEphy = 0;
 738                                 break;
 739                         case INCA_SWITCH_PHY_SPEED_10F:
 740                                 /* 10Base-T Full-duplex */
 741                                 regEphy = INCA_IP_Switch_EPHY_DL;
 742                                 break;
 743                         case INCA_SWITCH_PHY_SPEED_100H:
 744                                 /* 100Base-TX Half-duplex */
 745                                 regEphy = INCA_IP_Switch_EPHY_SL;
 746                                 break;
 747                         case INCA_SWITCH_PHY_SPEED_100F:
 748                                 /* 100Base-TX Full-duplex */
 749                                 regEphy = INCA_IP_Switch_EPHY_SL | INCA_IP_Switch_EPHY_DL;
 750                                 break;
 751                         }
 752
 753                         /* In case of Auto-negotiation,
 754                          * update the negotiated PAUSE support status
 755                          */
 756                         if (phyReg1 & (1 << 3)) {
 757                                 SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 758                                         (0x1 << 31) |   /* RA           */
 759                                         (0x0 << 30) |   /* Read         */
 760                                         (0x6 << 21) |   /* LAN          */
 761                                         (6   << 16));   /* PHY_ANER     */
 762                                 do {
 763                                         SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
 764                                 } while (phyReg6 & (1 << 31));
 765
 766                                 /* We are Autoneg-able.
 767                                  * Is Link partner also able to autoneg?
 768                                  */
 769                                 if (phyReg6 & (1 << 0)) {
 770                                         SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 771                                                 (0x1 << 31) |   /* RA           */
 772                                                 (0x0 << 30) |   /* Read         */
 773                                                 (0x6 << 21) |   /* LAN          */
 774                                                 (4   << 16));   /* PHY_ANAR     */
 775                                         do {
 776                                                 SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
 777                                         } while (phyReg4 & (1 << 31));
 778
 779                                         /* We advertise PAUSE capab.
 780                                          * Does link partner also advertise it?
 781                                          */
 782                                         if (phyReg4 & (1 << 10)) {
 783                                                 SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
 784                                                         (0x1 << 31) |   /* RA           */
 785                                                         (0x0 << 30) |   /* Read         */
 786                                                         (0x6 << 21) |   /* LAN          */
 787                                                         (5   << 16));   /* PHY_ANLPAR   */
 788                                                 do {
 789                                                         SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
 790                                                 } while (phyReg5 & (1 << 31));
 791
 792                                                 /* Link partner is PAUSE capab.
 793                                                  */
 794                                                 if (phyReg5 & (1 << 10)) {
 795                                                         regEphy |= INCA_IP_Switch_EPHY_PL;
 796                                                 }
 797                                         }
 798                                 }
 799
 800                         }
 801
 802                         /* Link is up */
 803                         regEphy |= INCA_IP_Switch_EPHY_LL;
 804
 805                         SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy);
 806                 }
 807         }
 808
 809         return 0;
 810
 811 Fail:
 812         printf("No Link on LAN port\n");
 813         return -1;
 814 }
 815 #endif /* CONFIG_INCA_IP_SWITCH_AMDIX */
 816
 817 #endif