git.sur5r.net Git - u-boot/blob - drivers/misc/mxc_ocotp.c

   1 /*
   2  * (C) Copyright 2013 ADVANSEE
   3  * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
   4  *
   5  * Based on Dirk Behme's
   6  * https://github.com/dirkbehme/u-boot-imx6/blob/28b17e9/drivers/misc/imx_otp.c,
   7  * which is based on Freescale's
   8  * http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/drivers/misc/imx_otp.c?h=imx_v2009.08_1.1.0&id=9aa74e6,
   9  * which is:
  10  * Copyright (C) 2011 Freescale Semiconductor, Inc.
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #include <common.h>
  16 #include <fuse.h>
  17 #include <asm/errno.h>
  18 #include <asm/io.h>
  19 #include <asm/arch/clock.h>
  20 #include <asm/arch/imx-regs.h>
  21
  22 #define BO_CTRL_WR_UNLOCK               16
  23 #define BM_CTRL_WR_UNLOCK               0xffff0000
  24 #define BV_CTRL_WR_UNLOCK_KEY           0x3e77
  25 #define BM_CTRL_ERROR                   0x00000200
  26 #define BM_CTRL_BUSY                    0x00000100
  27 #define BO_CTRL_ADDR                    0
  28 #ifdef CONFIG_MX7
  29 #define BM_CTRL_ADDR                    0x0000000f
  30 #define BM_CTRL_RELOAD                  0x00000400
  31 #else
  32 #define BM_CTRL_ADDR                    0x0000007f
  33 #endif
  34
  35 #ifdef CONFIG_MX7
  36 #define BO_TIMING_FSOURCE               12
  37 #define BM_TIMING_FSOURCE               0x0007f000
  38 #define BV_TIMING_FSOURCE_NS            1001
  39 #define BO_TIMING_PROG                  0
  40 #define BM_TIMING_PROG                  0x00000fff
  41 #define BV_TIMING_PROG_US               10
  42 #else
  43 #define BO_TIMING_STROBE_READ           16
  44 #define BM_TIMING_STROBE_READ           0x003f0000
  45 #define BV_TIMING_STROBE_READ_NS        37
  46 #define BO_TIMING_RELAX                 12
  47 #define BM_TIMING_RELAX                 0x0000f000
  48 #define BV_TIMING_RELAX_NS              17
  49 #define BO_TIMING_STROBE_PROG           0
  50 #define BM_TIMING_STROBE_PROG           0x00000fff
  51 #define BV_TIMING_STROBE_PROG_US        10
  52 #endif
  53
  54 #define BM_READ_CTRL_READ_FUSE          0x00000001
  55
  56 #define BF(value, field)                (((value) << BO_##field) & BM_##field)
  57
  58 #define WRITE_POSTAMBLE_US              2
  59
  60 #if defined(CONFIG_MX6) || defined(CONFIG_VF610)
  61 #define FUSE_BANK_SIZE  0x80
  62 #ifdef CONFIG_MX6SL
  63 #define FUSE_BANKS      8
  64 #else
  65 #define FUSE_BANKS      16
  66 #endif
  67 #elif defined CONFIG_MX7
  68 #define FUSE_BANK_SIZE  0x40
  69 #define FUSE_BANKS      16
  70 #else
  71 #error "Unsupported architecture\n"
  72 #endif
  73
  74 #if defined(CONFIG_MX6)
  75 #include <asm/arch/sys_proto.h>
  76
  77 /*
  78  * There is a hole in shadow registers address map of size 0x100
  79  * between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX and iMX6UL.
  80  * Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses,
  81  * we should account for this hole in address space.
  82  *
  83  * Similar hole exists between bank 14 and bank 15 of size
  84  * 0x80 on iMX6QP, iMX6DQ, iMX6SDL and iMX6SX.
  85  * Note: iMX6SL has only 0-7 banks and there is no hole.
  86  * Note: iMX6UL doesn't have this one.
  87  *
  88  * This function is to covert user input to physical bank index.
  89  * Only needed when read fuse, because we use register offset, so
  90  * need to calculate real register offset.
  91  * When write, no need to consider hole, always use the bank/word
  92  * index from fuse map.
  93  */
  94 u32 fuse_bank_physical(int index)
  95 {
  96         u32 phy_index;
  97
  98         if (is_cpu_type(MXC_CPU_MX6SL)) {
  99                 phy_index = index;
 100         } else if (is_cpu_type(MXC_CPU_MX6UL)) {
 101                 if (index >= 6)
 102                         phy_index = fuse_bank_physical(5) + (index - 6) + 3;
 103                 else
 104                         phy_index = index;
 105         } else {
 106                 if (index >= 15)
 107                         phy_index = fuse_bank_physical(14) + (index - 15) + 2;
 108                 else if (index >= 6)
 109                         phy_index = fuse_bank_physical(5) + (index - 6) + 3;
 110                 else
 111                         phy_index = index;
 112         }
 113         return phy_index;
 114 }
 115 #else
 116 u32 fuse_bank_physical(int index)
 117 {
 118         return index;
 119 }
 120 #endif
 121
 122 static void wait_busy(struct ocotp_regs *regs, unsigned int delay_us)
 123 {
 124         while (readl(&regs->ctrl) & BM_CTRL_BUSY)
 125                 udelay(delay_us);
 126 }
 127
 128 static void clear_error(struct ocotp_regs *regs)
 129 {
 130         writel(BM_CTRL_ERROR, &regs->ctrl_clr);
 131 }
 132
 133 static int prepare_access(struct ocotp_regs **regs, u32 bank, u32 word,
 134                                 int assert, const char *caller)
 135 {
 136         *regs = (struct ocotp_regs *)OCOTP_BASE_ADDR;
 137
 138         if (bank >= FUSE_BANKS ||
 139             word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 ||
 140             !assert) {
 141                 printf("mxc_ocotp %s(): Invalid argument\n", caller);
 142                 return -EINVAL;
 143         }
 144
 145         enable_ocotp_clk(1);
 146
 147         wait_busy(*regs, 1);
 148         clear_error(*regs);
 149
 150         return 0;
 151 }
 152
 153 static int finish_access(struct ocotp_regs *regs, const char *caller)
 154 {
 155         u32 err;
 156
 157         err = !!(readl(&regs->ctrl) & BM_CTRL_ERROR);
 158         clear_error(regs);
 159
 160         if (err) {
 161                 printf("mxc_ocotp %s(): Access protect error\n", caller);
 162                 return -EIO;
 163         }
 164
 165         return 0;
 166 }
 167
 168 static int prepare_read(struct ocotp_regs **regs, u32 bank, u32 word, u32 *val,
 169                         const char *caller)
 170 {
 171         return prepare_access(regs, bank, word, val != NULL, caller);
 172 }
 173
 174 int fuse_read(u32 bank, u32 word, u32 *val)
 175 {
 176         struct ocotp_regs *regs;
 177         int ret;
 178         u32 phy_bank;
 179
 180         ret = prepare_read(&regs, bank, word, val, __func__);
 181         if (ret)
 182                 return ret;
 183
 184         phy_bank = fuse_bank_physical(bank);
 185
 186         *val = readl(&regs->bank[phy_bank].fuse_regs[word << 2]);
 187
 188         return finish_access(regs, __func__);
 189 }
 190
 191 #ifdef CONFIG_MX7
 192 static void set_timing(struct ocotp_regs *regs)
 193 {
 194         u32 ipg_clk;
 195         u32 fsource, prog;
 196         u32 timing;
 197
 198         ipg_clk = mxc_get_clock(MXC_IPG_CLK);
 199
 200         fsource = DIV_ROUND_UP((ipg_clk / 1000) * BV_TIMING_FSOURCE_NS,
 201                         +       1000000) + 1;
 202         prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_PROG_US, 1000000) + 1;
 203
 204         timing = BF(fsource, TIMING_FSOURCE) | BF(prog, TIMING_PROG);
 205
 206         clrsetbits_le32(&regs->timing, BM_TIMING_FSOURCE | BM_TIMING_PROG,
 207                         timing);
 208 }
 209 #else
 210 static void set_timing(struct ocotp_regs *regs)
 211 {
 212         u32 ipg_clk;
 213         u32 relax, strobe_read, strobe_prog;
 214         u32 timing;
 215
 216         ipg_clk = mxc_get_clock(MXC_IPG_CLK);
 217
 218         relax = DIV_ROUND_UP(ipg_clk * BV_TIMING_RELAX_NS, 1000000000) - 1;
 219         strobe_read = DIV_ROUND_UP(ipg_clk * BV_TIMING_STROBE_READ_NS,
 220                                         1000000000) + 2 * (relax + 1) - 1;
 221         strobe_prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_STROBE_PROG_US,
 222                                                 1000000) + 2 * (relax + 1) - 1;
 223
 224         timing = BF(strobe_read, TIMING_STROBE_READ) |
 225                         BF(relax, TIMING_RELAX) |
 226                         BF(strobe_prog, TIMING_STROBE_PROG);
 227
 228         clrsetbits_le32(&regs->timing, BM_TIMING_STROBE_READ | BM_TIMING_RELAX |
 229                         BM_TIMING_STROBE_PROG, timing);
 230 }
 231 #endif
 232
 233 static void setup_direct_access(struct ocotp_regs *regs, u32 bank, u32 word,
 234                                 int write)
 235 {
 236         u32 wr_unlock = write ? BV_CTRL_WR_UNLOCK_KEY : 0;
 237 #ifdef CONFIG_MX7
 238         u32 addr = bank;
 239 #else
 240         u32 addr = bank << 3 | word;
 241 #endif
 242
 243         set_timing(regs);
 244         clrsetbits_le32(&regs->ctrl, BM_CTRL_WR_UNLOCK | BM_CTRL_ADDR,
 245                         BF(wr_unlock, CTRL_WR_UNLOCK) |
 246                         BF(addr, CTRL_ADDR));
 247 }
 248
 249 int fuse_sense(u32 bank, u32 word, u32 *val)
 250 {
 251         struct ocotp_regs *regs;
 252         int ret;
 253
 254         ret = prepare_read(&regs, bank, word, val, __func__);
 255         if (ret)
 256                 return ret;
 257
 258         setup_direct_access(regs, bank, word, false);
 259         writel(BM_READ_CTRL_READ_FUSE, &regs->read_ctrl);
 260         wait_busy(regs, 1);
 261 #ifdef CONFIG_MX7
 262         *val = readl((&regs->read_fuse_data0) + (word << 2));
 263 #else
 264         *val = readl(&regs->read_fuse_data);
 265 #endif
 266
 267         return finish_access(regs, __func__);
 268 }
 269
 270 static int prepare_write(struct ocotp_regs **regs, u32 bank, u32 word,
 271                                 const char *caller)
 272 {
 273         return prepare_access(regs, bank, word, true, caller);
 274 }
 275
 276 int fuse_prog(u32 bank, u32 word, u32 val)
 277 {
 278         struct ocotp_regs *regs;
 279         int ret;
 280
 281         ret = prepare_write(&regs, bank, word, __func__);
 282         if (ret)
 283                 return ret;
 284
 285         setup_direct_access(regs, bank, word, true);
 286 #ifdef CONFIG_MX7
 287         switch (word) {
 288         case 0:
 289                 writel(0, &regs->data1);
 290                 writel(0, &regs->data2);
 291                 writel(0, &regs->data3);
 292                 writel(val, &regs->data0);
 293                 break;
 294         case 1:
 295                 writel(val, &regs->data1);
 296                 writel(0, &regs->data2);
 297                 writel(0, &regs->data3);
 298                 writel(0, &regs->data0);
 299                 break;
 300         case 2:
 301                 writel(0, &regs->data1);
 302                 writel(val, &regs->data2);
 303                 writel(0, &regs->data3);
 304                 writel(0, &regs->data0);
 305                 break;
 306         case 3:
 307                 writel(0, &regs->data1);
 308                 writel(0, &regs->data2);
 309                 writel(val, &regs->data3);
 310                 writel(0, &regs->data0);
 311                 break;
 312         }
 313         wait_busy(regs, BV_TIMING_PROG_US);
 314 #else
 315         writel(val, &regs->data);
 316         wait_busy(regs, BV_TIMING_STROBE_PROG_US);
 317 #endif
 318         udelay(WRITE_POSTAMBLE_US);
 319
 320         return finish_access(regs, __func__);
 321 }
 322
 323 int fuse_override(u32 bank, u32 word, u32 val)
 324 {
 325         struct ocotp_regs *regs;
 326         int ret;
 327         u32 phy_bank;
 328
 329         ret = prepare_write(&regs, bank, word, __func__);
 330         if (ret)
 331                 return ret;
 332
 333         phy_bank = fuse_bank_physical(bank);
 334
 335         writel(val, &regs->bank[phy_bank].fuse_regs[word << 2]);
 336
 337         return finish_access(regs, __func__);
 338 }