]> git.sur5r.net Git - u-boot/blob - drivers/misc/ns87308.c
tools: mkimage: Call fclose in error path
[u-boot] / drivers / misc / ns87308.c
1 /*
2  * (C) Copyright 2000
3  * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <config.h>
9
10 #include <ns87308.h>
11
12 void initialise_ns87308 (void)
13 {
14 #ifdef CONFIG_SYS_NS87308_PS2MOD
15         unsigned char data;
16
17         /*
18          * Switch floppy drive to PS/2 mode.
19          */
20         read_pnp_config(SUPOERIO_CONF1, &data);
21         data &= 0xFB;
22         write_pnp_config(SUPOERIO_CONF1, data);
23 #endif
24
25 #if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_KBC1)
26         PNP_SET_DEVICE_BASE(LDEV_KBC1, CONFIG_SYS_NS87308_KBC1_BASE);
27         write_pnp_config(LUN_CONFIG_REG, 0);
28         write_pnp_config(CBASE_HIGH, 0x00);
29         write_pnp_config(CBASE_LOW, 0x64);
30 #endif
31
32 #if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_MOUSE)
33         PNP_ACTIVATE_DEVICE(LDEV_MOUSE);
34 #endif
35
36 #if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RTC_APC)
37         PNP_SET_DEVICE_BASE(LDEV_RTC_APC, CONFIG_SYS_NS87308_RTC_BASE);
38 #endif
39
40 #if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_FDC)
41         PNP_SET_DEVICE_BASE(LDEV_FDC, CONFIG_SYS_NS87308_FDC_BASE);
42         write_pnp_config(LUN_CONFIG_REG, 0x40);
43 #endif
44
45 #if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RARP)
46         PNP_SET_DEVICE_BASE(LDEV_PARP, CONFIG_SYS_NS87308_LPT_BASE);
47 #endif
48
49 #if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART1)
50         PNP_SET_DEVICE_BASE(LDEV_UART1, CONFIG_SYS_NS87308_UART1_BASE);
51 #endif
52
53 #if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART2)
54         PNP_SET_DEVICE_BASE(LDEV_UART2, CONFIG_SYS_NS87308_UART2_BASE);
55 #endif
56
57 #if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_GPIO)
58         PNP_SET_DEVICE_BASE(LDEV_GPIO, CONFIG_SYS_NS87308_GPIO_BASE);
59 #endif
60
61 #if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_POWRMAN)
62 #ifndef CONFIG_SYS_NS87308_PWMAN_BASE
63         PNP_ACTIVATE_DEVICE(LDEV_POWRMAN);
64 #else
65         PNP_SET_DEVICE_BASE(LDEV_POWRMAN, CONFIG_SYS_NS87308_PWMAN_BASE);
66
67         /*
68          * Enable all units
69          */
70         write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER1, 0x7d);
71         write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER2, 0x87);
72
73 #ifdef CONFIG_SYS_NS87308_PMC1
74         write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC1, CONFIG_SYS_NS87308_PMC1);
75 #endif
76
77 #ifdef CONFIG_SYS_NS87308_PMC2
78         write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC2, CONFIG_SYS_NS87308_PMC2);
79 #endif
80
81 #ifdef CONFIG_SYS_NS87308_PMC3
82         write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC3, CONFIG_SYS_NS87308_PMC3);
83 #endif
84 #endif
85 #endif
86
87 #ifdef CONFIG_SYS_NS87308_CS0_BASE
88         PNP_PGCS_CSLINE_BASE(0, CONFIG_SYS_NS87308_CS0_BASE);
89         PNP_PGCS_CSLINE_CONF(0, CONFIG_SYS_NS87308_CS0_CONF);
90 #endif
91
92 #ifdef CONFIG_SYS_NS87308_CS1_BASE
93         PNP_PGCS_CSLINE_BASE(1, CONFIG_SYS_NS87308_CS1_BASE);
94         PNP_PGCS_CSLINE_CONF(1, CONFIG_SYS_NS87308_CS1_CONF);
95 #endif
96
97 #ifdef CONFIG_SYS_NS87308_CS2_BASE
98         PNP_PGCS_CSLINE_BASE(2, CONFIG_SYS_NS87308_CS2_BASE);
99         PNP_PGCS_CSLINE_CONF(2, CONFIG_SYS_NS87308_CS2_CONF);
100 #endif
101 }